Product supplierVIP Reception Lounge Armchair with Dark Wood Accents, Cream leather-look coated fabric or corrected-grain leather, visible padded face and sewn borders
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 980 × 880 × 900 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight per armchair | 38 kg | |
|---|---|---|
| Rated occupant load | 160 kg per seat | |
| Seat foam density | 38 kg/m3 | |
| Back foam density | 30 kg/m3 | |
| Foam indentation hardness | 55 N seat cushion | |
| Foam rebound rating | 35% | |
| Inner frame bearing capacity | 220 kg static load | |
| Fabric or leather abrasion acceptance | 50,000 Martindale cycles | |
| Seating capacity | 1 adult per chair | |
| Recommended warranty | 36 months |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Cream leather-look coated fabric or corrected-grain leather, visible padded face and sewn borders | |
|---|---|---|
| Upholstery thickness | 1.2 mm face material | |
| Seat cushion core | 160 mm polyurethane foam at 38 kg/m3 over an 80 mm resilient support layer | |
| Back cushion core | 140 mm polyurethane foam at 30 kg/m3 with a soft upper layer | |
| Inner load frame | Kiln-dried hardwood rails with 30 x 50 mm principal members and glued corner blocks | |
| Arm structure | Upholstered board-and-wood arm box capped with a 35 mm dark stained wood-effect rail | |
| Decorative front trim | Dark reddish-brown wood veneer or laminated engineered wood border, 35 mm wide | |
| External arm panels | Padded cream upholstery over 12 mm board or composite panel | |
| Feet | Four dark rectangular block feet, 40 mm high, wood or wood-composite construction | |
| Seat support base | 12 mm structural board or sinuous-spring platform over hardwood rails | |
| Joining hardware | Bolted arm-to-seat joints, 8 mm threaded fittings, and reinforced corner plates | |
| Stitching construction | Single-needle border seams with 8 stitches per 50 mm and matching cream thread |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating function | Fixed single-seat lounge chair configured for upright conversation and formal guest reception | |
|---|---|---|
| Back support | Continuous high back provides lumbar and lower-shoulder support across a 470 mm back height | |
| Arm support | Wide 130 mm arm pads at 620 mm floor height support seated forearms during long visits | |
| Cushion retention | Permanent or friction-fit seat cushion with a 600 mm depth and hidden locating tabs | |
| Access clearance | Open front knee space with no crossbar allows sit-down entry from a 620 mm clear seat opening | |
| Floor protection | Four 40 mm block feet isolate the upholstered rail from the floor and accept felt glides | |
| Cleaning access | Fixed low-profile base with 40 mm floor clearance permits vacuum access under the front edge | |
| Configuration | Armchair can be paired face-to-face or in matching rows with the coordinating dark wood side table | |
| Color option count | 1 standard cream-and-dark-wood finish in the shown configuration | |
| Adjustability | No swivel, tilt, height adjustment, or removable leg mechanism; the chair is static floor seating | |
| Leg or block foot height | 40 mm | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive reception room | Place two chairs opposite one another with the coordinating side table for formal visitor meetings | |
|---|---|---|
| Government or enterprise VIP lounge | Use along visitor corridors or meeting suites where upright posture and a formal appearance are required | |
| Conference waiting area | Arrange in rows or quiet pairs to seat one adult per 980 mm-wide module | |
| Hotel lobby reception | Install near elevators or concierge zones for short-to-medium duration guest seating | |
| Senior manager office | Position in front of an executive desk or beside a low table for guest consultations | |
| Hard-floor installation | Fit felt or PTFE glides to the four block feet on tile, marble, or engineered wood floors | |
| Medium-traffic commercial use | Specify 50,000-cycle upholstery and 38 kg/m3 seat foam for daily visitor traffic | |
| Recommended Matching Desk Size | 2.4 m executive desk |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Seating strength and durability | EN 16139 applicable for non-domestic lounge seating strength, durability, and safety acceptance | |
|---|---|---|
| Upholstered furniture flammability | EN 1021and EN 1021applicable for cigarette and match ignition resistance when specified | |
| Formaldehyde from wood panels | EN 13986 applicable to engineered-wood panels, with E1 emission documentation required |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Furniture structural safety | Recommended references: GB/T 10357.6 | |
|---|---|---|
| Wood-based panels formaldehyde | GB 18580 applicable to any engineered-wood panel used inside arm panels or trim | |
| Upholstered furniture fire safety | GB 28481 applicable to upholstered furniture burning behavior when the project requires fire acceptance | |
| Furniture coatings limit | GB 18581 applicable to solvent coatings on dark wood trim if wood coating is used |
Standardized tender description text
This product must meet the following technical requirements: 1. Furniture structural safety: Recommended references: GB/T 10357.6; 2. Wood-based panels formaldehyde: GB 18580 applicable to any engineered-wood panel used inside arm panels or trim; 3. Upholstered furniture fire safety: GB 28481 applicable to upholstered furniture burning behavior when the project requires fire acceptance; 4. Furniture coatings limit: GB 18581 applicable to solvent coatings on dark wood trim if wood coating is used; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool