纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	980 × 880 × 900 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight per armchair	38 kg
Rated occupant load	160 kg per seat
Seat foam density	38 kg/m3
Back foam density	30 kg/m3
Foam indentation hardness	55 N seat cushion
Foam rebound rating	35%
Inner frame bearing capacity	220 kg static load
Fabric or leather abrasion acceptance	50,000 Martindale cycles
Seating capacity	1 adult per chair
Recommended warranty	36 months

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer upholstery	Cream leather-look coated fabric or corrected-grain leather, visible padded face and sewn borders
Upholstery thickness	1.2 mm face material
Seat cushion core	160 mm polyurethane foam at 38 kg/m3 over an 80 mm resilient support layer
Back cushion core	140 mm polyurethane foam at 30 kg/m3 with a soft upper layer
Inner load frame	Kiln-dried hardwood rails with 30 x 50 mm principal members and glued corner blocks
Arm structure	Upholstered board-and-wood arm box capped with a 35 mm dark stained wood-effect rail
Decorative front trim	Dark reddish-brown wood veneer or laminated engineered wood border, 35 mm wide
External arm panels	Padded cream upholstery over 12 mm board or composite panel
Feet	Four dark rectangular block feet, 40 mm high, wood or wood-composite construction
Seat support base	12 mm structural board or sinuous-spring platform over hardwood rails
Joining hardware	Bolted arm-to-seat joints, 8 mm threaded fittings, and reinforced corner plates
Stitching construction	Single-needle border seams with 8 stitches per 50 mm and matching cream thread

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating function	Fixed single-seat lounge chair configured for upright conversation and formal guest reception
Back support	Continuous high back provides lumbar and lower-shoulder support across a 470 mm back height
Arm support	Wide 130 mm arm pads at 620 mm floor height support seated forearms during long visits
Cushion retention	Permanent or friction-fit seat cushion with a 600 mm depth and hidden locating tabs
Access clearance	Open front knee space with no crossbar allows sit-down entry from a 620 mm clear seat opening
Floor protection	Four 40 mm block feet isolate the upholstered rail from the floor and accept felt glides
Cleaning access	Fixed low-profile base with 40 mm floor clearance permits vacuum access under the front edge
Configuration	Armchair can be paired face-to-face or in matching rows with the coordinating dark wood side table
Color option count	1 standard cream-and-dark-wood finish in the shown configuration
Adjustability	No swivel, tilt, height adjustment, or removable leg mechanism; the chair is static floor seating
Leg or block foot height	40 mm
Recline Angle / Lock Reference	125° with 3suggested lock positions

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive reception room	Place two chairs opposite one another with the coordinating side table for formal visitor meetings
Government or enterprise VIP lounge	Use along visitor corridors or meeting suites where upright posture and a formal appearance are required
Conference waiting area	Arrange in rows or quiet pairs to seat one adult per 980 mm-wide module
Hotel lobby reception	Install near elevators or concierge zones for short-to-medium duration guest seating
Senior manager office	Position in front of an executive desk or beside a low table for guest consultations
Hard-floor installation	Fit felt or PTFE glides to the four block feet on tile, marble, or engineered wood floors
Medium-traffic commercial use	Specify 50,000-cycle upholstery and 38 kg/m3 seat foam for daily visitor traffic
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Seating strength and durability	EN 16139 applicable for non-domestic lounge seating strength, durability, and safety acceptance
Upholstered furniture flammability	EN 1021and EN 1021applicable for cigarette and match ignition resistance when specified
Formaldehyde from wood panels	EN 13986 applicable to engineered-wood panels, with E1 emission documentation required

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.4 公共及休闲座椅

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Furniture structural safety	Recommended references: GB/T 10357.6
Wood-based panels formaldehyde	GB 18580 applicable to any engineered-wood panel used inside arm panels or trim
Upholstered furniture fire safety	GB 28481 applicable to upholstered furniture burning behavior when the project requires fire acceptance
Furniture coatings limit	GB 18581 applicable to solvent coatings on dark wood trim if wood coating is used

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Furniture structural safety：Recommended references: GB/T 10357.6；
2. Wood-based panels formaldehyde：GB 18580 applicable to any engineered-wood panel used inside arm panels or trim；
3. Upholstered furniture fire safety：GB 28481 applicable to upholstered furniture burning behavior when the project requires fire acceptance；
4. Furniture coatings limit：GB 18581 applicable to solvent coatings on dark wood trim if wood coating is used；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RCP-1S-CREAM-WD

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RCP-1S-CREAM-WD

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RCP-1S-CREAM-WD打开导出工具

页面快速操作

发布采购询价

产品描述

The VIP Reception Lounge Armchair with Dark Wood Accents is a formal single-seat upholstered chair designed for upright conversation and guest reception. Its cream leather-look upholstery creates a light, refined visual base, while dark reddish-brown trim, dark stained wood-effect arm rails, and four dark rectangular block feet add definition and a structured executive character. The chair features a continuous high back, broad upholstered arms, a fixed or friction-fit seat cushion with hidden locating tabs, and an open front without a crossbar for straightforward sit-down entry. Construction is centered on a kiln-dried hardwood inner frame with principal rails and glued corner blocks. The visible padded surfaces use cream leather-look coated fabric or corrected-grain leather with sewn borders. Seat cushioning combines a polyurethane foam core over a resilient support layer, using high-resilience foam at a stated seat density of 38 kg/m3; the back cushion uses softer layering with foam at 30 kg/m3. The arm boxes combine board and wood structure beneath padded external panels, capped with dark wood-effect rails. A matching dark veneer or laminated engineered wood border accents the front face. Functionally, the armchair is built for reception use rather than deep reclining. The high back provides lumbar and lower-shoulder support, wide arm pads support forearms during longer visits, and the permanent seat arrangement preserves a neat presentation. The low-profile base leaves clearance under the front edge for vacuum access, while the block feet separate the upholstered rail from the floor and can accept felt or PTFE glides on tile, marble, engineered wood, and other hard surfaces. This model suits executive reception rooms, government or enterprise VIP lounges, conference waiting areas, hotel lobbies near elevators or concierge desks, and senior manager offices. Pairing two chairs opposite one another with a coordinating side table creates a formal meeting setting; quiet pairs or orderly rows work well in waiting and corridor zones. Procurement teams should note the unbranded RCP-1S-CREAM-WD specification, cream-and-dark-wood appearance, fixed cushion layout, and single-seat configuration. Delivery is referenced as one set across two cartons, with assembly time stated as 40 minutes per set and packaging and loading data available for planning. Material options should be confirmed at order stage, as should glide choice for the intended floor finish. The rated occupant load is 160 kg per seat, supporting its use in standard commercial reception and office seating applications.

VIP Reception Lounge Armchair with Dark Wood Accents Specifications

供应商与现货