Beige Upholstered Reception Armchair with Reddish-Brown Wood Frame (model RC-AS-BEIGE-WD-01) is listed under Lobby Reception Sofa. Dimensions: 1100 × 850 × 900 mm. Materials: Beige woven textile with visible fine texture; fabric mass target 320 g/m2, composition requires supplier BOM confirmation. Load capacity: 320 kg. Product Features: Formal,style,boxy,single-seat,structure,beige,fabric,upholstery,exposed,wood,frame. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | KESHANG | Model | RC-AS-BEIGE-WD-01 |
| Overall dimensions (W × D × H) | 1100 × 850 × 900 mm | Finished Seat Cushion Thickness | 90 mm |
| Backrest Padding Thickness | 70 mm | Lumbar Support Zone Height | 240 mm |
| Clear Width Between Armrests | 540 mm | Recommended user weight per seat | 160 kg |
| Net weight per armchair | 42 kg | Seat cushion foam density | 35 kg/m3 |
| Back cushion foam density | 28 kg/m3 | Foam indentation resilience | 40% |
| Static seat proof load | 320 kg | Durability cycles for seat loading | 100,000 cycles |
| Number of users | 1 person | Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
| Back Foam Density Reference | 38 kg/m³ | Outer upholstery | Beige woven textile with visible fine texture; fabric mass target 320 g/m2, composition requires supplier BOM confirmation |
| Seat cushion | Fixed foam pad, 140 mm thick at 35 kg/m3 density, wrapped in soft polyester wadding | Back cushion | Fixed layered back pad, 150 mm thick at 28 kg/m3 density, with horizontal seam detail |
| Arm pads | Beige fabric-covered foam caps, 150 mm wide, set over wood arm carcasses | Structural frame | Reddish-brown stained solid wood or engineered wood rails, target 45 x 70 mm primary sections |
| Base plinth | Continuous reddish-brown wood perimeter base with recessed floor clearance | Side and lower panels | Beige fabric-upholstered panels inset within rectangular wood rails |
| Decorative head/arm cloths | White openwork lace-like protective throws placed on back and arms | Internal seat support | Hardwood or birch plywood slat/board deck, target 15 mm thickness, over wood rails |
| Joining hardware | Dowelled, glued, and screwed wood corner joints with steel corner brackets | Surface finish | Red-brown transparent wood stain with clear protective lacquer |
| Feet/glides | Concealed polymer floor-protecting glides recessed into plinth, 8 pieces | Seating posture | Fixed upright posture with 95-degree back angle for formal guest reception |
| Cushion retention | Fixed seat and back cushions maintain aligned formal appearance and prevent visitor displacement | Arm support | Two wide padded arms provide 190 mm elevated elbow support during upright conversation |
| Base stability | Continuous perimeter plinth distributes load and prevents tipping on level reception-room floors | Protective textile use | Removable white lace throws can protect head, back, and arm contact zones during daily use |
| Floor protection | Recessed glides allow repositioning while reducing scratches on tile or wood floors | Arrangement pattern | Two single armchairs can face a central side table for one-to-one guest reception |
| Storage or recline | No drawer, swivel, tilt, or height-adjustment mechanism; product is a fixed stationary lounge chair | Recline Angle / Lock Reference | 125° with 3suggested lock positions |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | Height Adjustment Stroke | 100 mm continuous travel |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Carton Dimensions | 850× 420× 720 mm |
| Reference Packaged Gross Weight | 23 kg/set | Reference Carton Volume | 0.26 m³/set |
| Indicative 20GP Loading | 135 sets at 85% space utilization | Indicative 40HQ Loading | 320 sets at 85% space utilization |
| Executive guest office | Place one chair on each side of a side table for short meetings and visitor reception | VIP reception lounge | Use in formal government or corporate lounges where upright posture and durable fabric are required |
| Meeting anteroom | Suitable for waiting areas outside conference rooms, with 760 mm seat width for larger users | Hotel lobby seating | Can be arranged in two-seat conversation clusters with a central tea table |
| Senior care or institutional reception | Low 430 mm seat and stable plinth support assisted standing, subject to site-specific accessibility review | Recommended cluster spacing | Maintain 1800 mm between facing chairs and table edges for access and cleaning clearance |
| Recommended Matching Desk Size | 2.4 m executive desk | Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1100 × 850 × 900 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight per seat | 160 kg | |
|---|---|---|
| Net weight per armchair | 42 kg | |
| Seat cushion foam density | 35 kg/m3 | |
| Back cushion foam density | 28 kg/m3 | |
| Foam indentation resilience | 40% | |
| Static seat proof load | 320 kg | |
| Durability cycles for seat loading | 100,000 cycles | |
| Number of users | 1 person | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Beige woven textile with visible fine texture; fabric mass target 320 g/m2, composition requires supplier BOM confirmation | |
|---|---|---|
| Seat cushion | Fixed foam pad, 140 mm thick at 35 kg/m3 density, wrapped in soft polyester wadding | |
| Back cushion | Fixed layered back pad, 150 mm thick at 28 kg/m3 density, with horizontal seam detail | |
| Arm pads | Beige fabric-covered foam caps, 150 mm wide, set over wood arm carcasses | |
| Structural frame | Reddish-brown stained solid wood or engineered wood rails, target 45 x 70 mm primary sections | |
| Base plinth | Continuous reddish-brown wood perimeter base with recessed floor clearance | |
| Side and lower panels | Beige fabric-upholstered panels inset within rectangular wood rails | |
| Decorative head/arm cloths | White openwork lace-like protective throws placed on back and arms | |
| Internal seat support | Hardwood or birch plywood slat/board deck, target 15 mm thickness, over wood rails | |
| Joining hardware | Dowelled, glued, and screwed wood corner joints with steel corner brackets | |
| Surface finish | Red-brown transparent wood stain with clear protective lacquer | |
| Feet/glides | Concealed polymer floor-protecting glides recessed into plinth, 8 pieces |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating posture | Fixed upright posture with 95-degree back angle for formal guest reception | |
|---|---|---|
| Cushion retention | Fixed seat and back cushions maintain aligned formal appearance and prevent visitor displacement | |
| Arm support | Two wide padded arms provide 190 mm elevated elbow support during upright conversation | |
| Base stability | Continuous perimeter plinth distributes load and prevents tipping on level reception-room floors | |
| Protective textile use | Removable white lace throws can protect head, back, and arm contact zones during daily use | |
| Floor protection | Recessed glides allow repositioning while reducing scratches on tile or wood floors | |
| Arrangement pattern | Two single armchairs can face a central side table for one-to-one guest reception | |
| Storage or recline | No drawer, swivel, tilt, or height-adjustment mechanism; product is a fixed stationary lounge chair | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive guest office | Place one chair on each side of a side table for short meetings and visitor reception | |
|---|---|---|
| VIP reception lounge | Use in formal government or corporate lounges where upright posture and durable fabric are required | |
| Meeting anteroom | Suitable for waiting areas outside conference rooms, with 760 mm seat width for larger users | |
| Hotel lobby seating | Can be arranged in two-seat conversation clusters with a central tea table | |
| Senior care or institutional reception | Low 430 mm seat and stable plinth support assisted standing, subject to site-specific accessibility review | |
| Recommended cluster spacing | Maintain 1800 mm between facing chairs and table edges for access and cleaning clearance | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Office and contract seating safety | EN 16139, applicable to non-domestic seating strength, durability, and safety | |
|---|---|---|
| Upholstered furniture burning behavior | EN 1021and EN 1021applicable to cigarette and match ignition tests for fabric and fillings |
US and Canada office-furniture standards
| Contract lounge seating durability | ANSI/BIFMA X5.4, applicable to static load, impact, and durability testing of lounge seating |
|---|
Standards applicable to China-market projects
| Upholstered furniture safety | GB 17927, applicable to cigarette and match ignition resistance of upholstered furniture materials | |
|---|---|---|
| Formal furniture mechanical tests | GB/T 10357.6, applicable to strength and durability testing of single-seat seating | |
| Wood furniture finish | GB/T 3324, applicable to dimensional tolerances, finish, and construction quality of wooden furniture | |
| Formaldehyde emission | GB 18580, applicable to formaldehyde emission from wood-based panels used in the concealed frame |
This product must meet the following technical requirements: 1. Upholstered furniture safety: GB 17927, applicable to cigarette and match ignition resistance of upholstered furniture materials; 2. Formal furniture mechanical tests: GB/T 10357.6, applicable to strength and durability testing of single-seat seating; 3. Wood furniture finish: GB/T 3324, applicable to dimensional tolerances, finish, and construction quality of wooden furniture; 4. Formaldehyde emission: GB 18580, applicable to formaldehyde emission from wood-based panels used in the concealed frame; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp