纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1100 × 850 × 900 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight per seat	160 kg
Net weight per armchair	42 kg
Seat cushion foam density	35 kg/m3
Back cushion foam density	28 kg/m3
Foam indentation resilience	40%
Static seat proof load	320 kg
Durability cycles for seat loading	100,000 cycles
Number of users	1 person
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer upholstery	Beige woven textile with visible fine texture; fabric mass target 320 g/m2, composition requires supplier BOM confirmation
Seat cushion	Fixed foam pad, 140 mm thick at 35 kg/m3 density, wrapped in soft polyester wadding
Back cushion	Fixed layered back pad, 150 mm thick at 28 kg/m3 density, with horizontal seam detail
Arm pads	Beige fabric-covered foam caps, 150 mm wide, set over wood arm carcasses
Structural frame	Reddish-brown stained solid wood or engineered wood rails, target 45 x 70 mm primary sections
Base plinth	Continuous reddish-brown wood perimeter base with recessed floor clearance
Side and lower panels	Beige fabric-upholstered panels inset within rectangular wood rails
Decorative head/arm cloths	White openwork lace-like protective throws placed on back and arms
Internal seat support	Hardwood or birch plywood slat/board deck, target 15 mm thickness, over wood rails
Joining hardware	Dowelled, glued, and screwed wood corner joints with steel corner brackets
Surface finish	Red-brown transparent wood stain with clear protective lacquer
Feet/glides	Concealed polymer floor-protecting glides recessed into plinth, 8 pieces

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating posture	Fixed upright posture with 95-degree back angle for formal guest reception
Cushion retention	Fixed seat and back cushions maintain aligned formal appearance and prevent visitor displacement
Arm support	Two wide padded arms provide 190 mm elevated elbow support during upright conversation
Base stability	Continuous perimeter plinth distributes load and prevents tipping on level reception-room floors
Protective textile use	Removable white lace throws can protect head, back, and arm contact zones during daily use
Floor protection	Recessed glides allow repositioning while reducing scratches on tile or wood floors
Arrangement pattern	Two single armchairs can face a central side table for one-to-one guest reception
Storage or recline	No drawer, swivel, tilt, or height-adjustment mechanism; product is a fixed stationary lounge chair
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive guest office	Place one chair on each side of a side table for short meetings and visitor reception
VIP reception lounge	Use in formal government or corporate lounges where upright posture and durable fabric are required
Meeting anteroom	Suitable for waiting areas outside conference rooms, with 760 mm seat width for larger users
Hotel lobby seating	Can be arranged in two-seat conversation clusters with a central tea table
Senior care or institutional reception	Low 430 mm seat and stable plinth support assisted standing, subject to site-specific accessibility review
Recommended cluster spacing	Maintain 1800 mm between facing chairs and table edges for access and cleaning clearance
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office and contract seating safety	EN 16139, applicable to non-domestic seating strength, durability, and safety
Upholstered furniture burning behavior	EN 1021and EN 1021applicable to cigarette and match ignition tests for fabric and fillings

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Contract lounge seating durability	ANSI/BIFMA X5.4, applicable to static load, impact, and durability testing of lounge seating

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Upholstered furniture safety	GB 17927, applicable to cigarette and match ignition resistance of upholstered furniture materials
Formal furniture mechanical tests	GB/T 10357.6, applicable to strength and durability testing of single-seat seating
Wood furniture finish	GB/T 3324, applicable to dimensional tolerances, finish, and construction quality of wooden furniture
Formaldehyde emission	GB 18580, applicable to formaldehyde emission from wood-based panels used in the concealed frame

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Upholstered furniture safety：GB 17927, applicable to cigarette and match ignition resistance of upholstered furniture materials；
2. Formal furniture mechanical tests：GB/T 10357.6, applicable to strength and durability testing of single-seat seating；
3. Wood furniture finish：GB/T 3324, applicable to dimensional tolerances, finish, and construction quality of wooden furniture；
4. Formaldehyde emission：GB 18580, applicable to formaldehyde emission from wood-based panels used in the concealed frame；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RC-AS-BEIGE-WD-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RC-AS-BEIGE-WD-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RC-AS-BEIGE-WD-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Beige Upholstered Reception Armchair presents a formal, single-seat silhouette with a boxy, structured appearance. Its beige woven fabric upholstery is set within an exposed reddish-brown wood frame, creating a disciplined contrast between soft textile surfaces and rectilinear wood rails. Side and lower panels are inset within the frame, while a continuous wood perimeter plinth gives the chair a grounded, architectural base. Fixed seat and back cushions preserve a neat aligned appearance, complemented by horizontal seam detailing on the back pad and beige fabric-covered foam arm caps. White openwork lace-like protective throws are placed on the back and arms as removable coverings for contact zones. Construction uses a reddish-brown stained solid wood or engineered wood rail frame, with a hardwood or birch plywood slat or board deck over wood rails. The seat combines a fixed foam pad wrapped in soft polyester wadding with a layered back pad, using high-resilience foam specified at different densities for seat and back support. Arm pads sit over wood arm carcasses, and recessed glides beneath the plinth help reduce scratches when the chair is repositioned on tile or wood floors. Designed for upright guest reception, the chair has a fixed 95-degree back angle and two padded arms offering elevated elbow support during conversation. The continuous plinth distributes load and supports stability on level floors, while fixed cushions prevent displacement by visitors. The removable white throws protect head, back, and arm contact areas during daily use. A pair of chairs may face a central side or tea table to form a one-to-one reception layout, with sufficient clearance maintained for access and cleaning. This armchair suits executive guest offices, corporate or government VIP lounges, meeting anterooms, hotel lobby conversation areas, and institutional reception settings. Its lower seat and stable plinth may also support assisted standing in senior care or similar environments, subject to site-specific accessibility review. Procurement teams should note the model is unbranded and supplied as one set in two cartons, with a reference assembly time of forty minutes per set. Upholstery composition requires supplier bill-of-materials confirmation, and accessibility suitability should be checked against the intended application. Recommended user weight, load ratings, cushion dimensions, clear arm width, foam resilience, and durability cycle values are documented for specification review.

Beige Upholstered Reception Armchair with Reddish-Brown Wood Frame Specifications

供应商与现货