Eight-Seat Formal Reception Sofa Set with Center Table and Lace Headrest Covers (model RC-ARM-8ST-WT) is listed under Lobby Reception Sofa. Dimensions: 900 × 850 × 900 mm. Materials: Dark stained hardwood or engineered-wood frame with 50 x 50 mm visible posts and corner rails. Load capacity: 200 kg. Product Features: formal,style,exposed,wood,frame,fabric,upholstery,eight-seat,symmetrical,layout,block,feet,removable,lace,covers. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | KESHANG | Model | RC-ARM-8ST-WT |
| Overall dimensions (W × D × H) | 900 × 850 × 900 mm | Finished Seat Cushion Thickness | 90 mm |
| Backrest Padding Thickness | 70 mm | Lumbar Support Zone Height | 240 mm |
| Clear Width Between Armrests | 540 mm | Single chair net weight | 38 kg |
| Recommended per-seat user weight | 160 kg | Seat foam static compression target | 30 percent under 75 kg seat-pan load |
| Seat foam density | 35 kg/m3 | Back foam density | 28 kg/m3 |
| Fabric abrasion acceptance target | 30000 Martindale cycles | Wood frame static seat load target | 200 kg |
| Center table distributed top load | 40 kg | Recommended seated users | 8 users |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | Load-bearing chair frame | Dark stained hardwood or engineered-wood frame with 50 x 50 mm visible posts and corner rails |
| Seat support deck | Plywood or hardwood slat deck with a nominal 15 mm structural thickness | Seat cushion | High-resilience polyurethane foam, 120 mm thick, wrapped in polyester fiber |
| Back cushion | Shaped polyurethane foam, 100 mm thick, with soft fiber fill layer | Upholstery fabric | Beige woven textile with matte texture and a nominal 0.8 mm face thickness |
| Arm pads | Fabric-covered padded arm tops over wood support boards | Outer panels | Fabric-upholstered side and front panels enclosed by dark wood perimeter rails |
| Back rail detail | Dark wood top rail with three open rectangular decorative openings and vertical separators | Feet and plinth | Dark stained block feet integrated with a low perimeter base rail |
| Center table | Dark wood table with flat top, four straight legs, and open geometric apron detailing | Protective covers | White knitted lace headrest and armrest doilies with scalloped edges |
| Fastening hardware | Steel bolts, brackets, and screw connectors with anti-loose washers | Single-person seating | Each chair provides one independent 580 mm wide seat with fixed back and dual arm support |
| Fixed formal posture | Fixed seat angle at 5 degrees and back angle at 100 degrees support upright reception seating | Non-swivel construction | Wood block feet and a fixed frame create a stationary seat without swivel, recline, or rocking motion |
| Central table service | The 600 x 600 mm table supports documents, cups, trays, or floral display between facing seats | Symmetrical meeting layout | Four chairs face four chairs across the center table for discussion, interview, or guest reception use |
| Removable protective textiles | Lace headrest and armrest covers can be removed for washing or replacement while preserving main upholstery | Back ventilation detail | Three open compartments in the upper back rail provide a decorative break and air circulation behind the cushion |
| Floor protection | Four block feet per chair should use felt or polymer glides with a 40 mm contact pad to reduce floor marking | Knockdown assembly | Back rails, seat decks, and leg assemblies can ship flat or partially folded with bolted corner joints |
| Maintenance access | Loose seat and back cushions permit fabric inspection, foam replacement, and periodic fastener retightening | Color coordination | One beige fabric color and one dark wood finish are shown, giving a uniform formal appearance across 8 seats |
| Block foot height | 80 mm | Total set packaging volume | 2.28 CBM |
| Reference Package Count | 1 set / 2 cartons | Reference Assembly Time | 40 minutes per set |
| Reference Carton Dimensions | 850× 420× 720 mm | Reference Packaged Gross Weight | 23 kg/set |
| Reference Carton Volume | 0.26 m³/set | Indicative 20GP Loading | 135 sets at 85% space utilization |
| Indicative 40HQ Loading | 320 sets at 85% space utilization | Executive reception room | Use the eight-seat symmetric layout for formal guest visits where two parties face each other across a central table |
| Government or corporate waiting lounge | Place the set along a window wall or VIP room to provide upright, durable seating with easy custodial access | Meeting and interview room | Use two facing rows for structured interviews, contract discussions, or small committee meetings |
| Hotel business lounge | Configure as one 8-seat set or split into four paired conversation zones for resident guests and visitors | Senior-care or institutional guest area | The 450 mm seat target and fixed arms assist controlled upright seating, subject to accessibility review |
| Quiet office consultation area | Pair two or four chairs with the center table for confidential discussions while retaining the remaining chairs elsewhere | Recommended floor protection | Use glides or a low-pile rug on hard flooring because the chairs are stationary wood-foot units with concentrated corner loads |
| Cleaning and housekeeping plan | Specify washable lace covers and weekly vacuuming for beige woven fabric in medium-traffic reception spaces | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 900 × 850 × 900 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Single chair net weight | 38 kg | |
|---|---|---|
| Recommended per-seat user weight | 160 kg | |
| Seat foam static compression target | 30 percent under 75 kg seat-pan load | |
| Seat foam density | 35 kg/m3 | |
| Back foam density | 28 kg/m3 | |
| Fabric abrasion acceptance target | 30000 Martindale cycles | |
| Wood frame static seat load target | 200 kg | |
| Center table distributed top load | 40 kg | |
| Recommended seated users | 8 users | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Load-bearing chair frame | Dark stained hardwood or engineered-wood frame with 50 x 50 mm visible posts and corner rails | |
|---|---|---|
| Seat support deck | Plywood or hardwood slat deck with a nominal 15 mm structural thickness | |
| Seat cushion | High-resilience polyurethane foam, 120 mm thick, wrapped in polyester fiber | |
| Back cushion | Shaped polyurethane foam, 100 mm thick, with soft fiber fill layer | |
| Upholstery fabric | Beige woven textile with matte texture and a nominal 0.8 mm face thickness | |
| Arm pads | Fabric-covered padded arm tops over wood support boards | |
| Outer panels | Fabric-upholstered side and front panels enclosed by dark wood perimeter rails | |
| Back rail detail | Dark wood top rail with three open rectangular decorative openings and vertical separators | |
| Feet and plinth | Dark stained block feet integrated with a low perimeter base rail | |
| Center table | Dark wood table with flat top, four straight legs, and open geometric apron detailing | |
| Protective covers | White knitted lace headrest and armrest doilies with scalloped edges | |
| Fastening hardware | Steel bolts, brackets, and screw connectors with anti-loose washers |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Single-person seating | Each chair provides one independent 580 mm wide seat with fixed back and dual arm support | |
|---|---|---|
| Fixed formal posture | Fixed seat angle at 5 degrees and back angle at 100 degrees support upright reception seating | |
| Non-swivel construction | Wood block feet and a fixed frame create a stationary seat without swivel, recline, or rocking motion | |
| Central table service | The 600 x 600 mm table supports documents, cups, trays, or floral display between facing seats | |
| Symmetrical meeting layout | Four chairs face four chairs across the center table for discussion, interview, or guest reception use | |
| Removable protective textiles | Lace headrest and armrest covers can be removed for washing or replacement while preserving main upholstery | |
| Back ventilation detail | Three open compartments in the upper back rail provide a decorative break and air circulation behind the cushion | |
| Floor protection | Four block feet per chair should use felt or polymer glides with a 40 mm contact pad to reduce floor marking | |
| Knockdown assembly | Back rails, seat decks, and leg assemblies can ship flat or partially folded with bolted corner joints | |
| Maintenance access | Loose seat and back cushions permit fabric inspection, foam replacement, and periodic fastener retightening | |
| Color coordination | One beige fabric color and one dark wood finish are shown, giving a uniform formal appearance across 8 seats | |
| Block foot height | 80 mm |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Total set packaging volume | 2.28 CBM | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive reception room | Use the eight-seat symmetric layout for formal guest visits where two parties face each other across a central table | |
|---|---|---|
| Government or corporate waiting lounge | Place the set along a window wall or VIP room to provide upright, durable seating with easy custodial access | |
| Meeting and interview room | Use two facing rows for structured interviews, contract discussions, or small committee meetings | |
| Hotel business lounge | Configure as one 8-seat set or split into four paired conversation zones for resident guests and visitors | |
| Senior-care or institutional guest area | The 450 mm seat target and fixed arms assist controlled upright seating, subject to accessibility review | |
| Quiet office consultation area | Pair two or four chairs with the center table for confidential discussions while retaining the remaining chairs elsewhere | |
| Recommended floor protection | Use glides or a low-pile rug on hard flooring because the chairs are stationary wood-foot units with concentrated corner loads | |
| Cleaning and housekeeping plan | Specify washable lace covers and weekly vacuuming for beige woven fabric in medium-traffic reception spaces |
EU Market Access Requirements* EN Standards
| Seating strength and durability standard | EN 16139 for non-domestic seating strength, durability, and safety | |
|---|---|---|
| Upholstered furniture assessment | EN 12520 for strength, durability, and safety of domestic seating | |
| Furniture dimensional inspection | EN 13021 for dimensions and tolerances of furniture products |
US and Canada office-furniture standards
| Office lounge seating standard | ANSI/BIFMA X5.4 for lounge seating static, impact, and cyclic load tests | |
|---|---|---|
| Seat static load test reference | ANSI/BIFMA X5.4 seat static loading procedure | |
| Back strength test reference | ANSI/BIFMA X5.4 back-rest strength procedure | |
| Leg and arm durability reference | ANSI/BIFMA X5.4 cyclic leg and arm loading procedures |
Standards applicable to China-market projects
| Furniture strength and durability reference | GB/T 10357.6 for single-seat furniture strength and durability test methods | |
|---|---|---|
| Furniture stability reference | GB/T 10357.7 for furniture stability test methods | |
| Wood furniture general technical condition | GB/T 3324 for wooden furniture dimensions, materials, tolerances, and workmanship | |
| Upholstered furniture safety reference | GB 17927 for ignition resistance of upholstered furniture soft furnishings | |
| Formaldehyde emission reference | GB 18584 for indoor decorative wood-based furniture limited harmful substances |
This product must meet the following technical requirements: 1. Furniture strength and durability reference: GB/T 10357.6 for single-seat furniture strength and durability test methods; 2. Furniture stability reference: GB/T 10357.7 for furniture stability test methods; 3. Wood furniture general technical condition: GB/T 3324 for wooden furniture dimensions, materials, tolerances, and workmanship; 4. Upholstered furniture safety reference: GB 17927 for ignition resistance of upholstered furniture soft furnishings; 5. Formaldehyde emission reference: GB 18584 for indoor decorative wood-based furniture limited harmful substances; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp