纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	900 × 850 × 900 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Single chair net weight	38 kg
Recommended per-seat user weight	160 kg
Seat foam static compression target	30 percent under 75 kg seat-pan load
Seat foam density	35 kg/m3
Back foam density	28 kg/m3
Fabric abrasion acceptance target	30000 Martindale cycles
Wood frame static seat load target	200 kg
Center table distributed top load	40 kg
Recommended seated users	8 users
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Load-bearing chair frame	Dark stained hardwood or engineered-wood frame with 50 x 50 mm visible posts and corner rails
Seat support deck	Plywood or hardwood slat deck with a nominal 15 mm structural thickness
Seat cushion	High-resilience polyurethane foam, 120 mm thick, wrapped in polyester fiber
Back cushion	Shaped polyurethane foam, 100 mm thick, with soft fiber fill layer
Upholstery fabric	Beige woven textile with matte texture and a nominal 0.8 mm face thickness
Arm pads	Fabric-covered padded arm tops over wood support boards
Outer panels	Fabric-upholstered side and front panels enclosed by dark wood perimeter rails
Back rail detail	Dark wood top rail with three open rectangular decorative openings and vertical separators
Feet and plinth	Dark stained block feet integrated with a low perimeter base rail
Center table	Dark wood table with flat top, four straight legs, and open geometric apron detailing
Protective covers	White knitted lace headrest and armrest doilies with scalloped edges
Fastening hardware	Steel bolts, brackets, and screw connectors with anti-loose washers

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Single-person seating	Each chair provides one independent 580 mm wide seat with fixed back and dual arm support
Fixed formal posture	Fixed seat angle at 5 degrees and back angle at 100 degrees support upright reception seating
Non-swivel construction	Wood block feet and a fixed frame create a stationary seat without swivel, recline, or rocking motion
Central table service	The 600 x 600 mm table supports documents, cups, trays, or floral display between facing seats
Symmetrical meeting layout	Four chairs face four chairs across the center table for discussion, interview, or guest reception use
Removable protective textiles	Lace headrest and armrest covers can be removed for washing or replacement while preserving main upholstery
Back ventilation detail	Three open compartments in the upper back rail provide a decorative break and air circulation behind the cushion
Floor protection	Four block feet per chair should use felt or polymer glides with a 40 mm contact pad to reduce floor marking
Knockdown assembly	Back rails, seat decks, and leg assemblies can ship flat or partially folded with bolted corner joints
Maintenance access	Loose seat and back cushions permit fabric inspection, foam replacement, and periodic fastener retightening
Color coordination	One beige fabric color and one dark wood finish are shown, giving a uniform formal appearance across 8 seats
Block foot height	80 mm

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Total set packaging volume	2.28 CBM
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive reception room	Use the eight-seat symmetric layout for formal guest visits where two parties face each other across a central table
Government or corporate waiting lounge	Place the set along a window wall or VIP room to provide upright, durable seating with easy custodial access
Meeting and interview room	Use two facing rows for structured interviews, contract discussions, or small committee meetings
Hotel business lounge	Configure as one 8-seat set or split into four paired conversation zones for resident guests and visitors
Senior-care or institutional guest area	The 450 mm seat target and fixed arms assist controlled upright seating, subject to accessibility review
Quiet office consultation area	Pair two or four chairs with the center table for confidential discussions while retaining the remaining chairs elsewhere
Recommended floor protection	Use glides or a low-pile rug on hard flooring because the chairs are stationary wood-foot units with concentrated corner loads
Cleaning and housekeeping plan	Specify washable lace covers and weekly vacuuming for beige woven fabric in medium-traffic reception spaces

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Seating strength and durability standard	EN 16139 for non-domestic seating strength, durability, and safety
Upholstered furniture assessment	EN 12520 for strength, durability, and safety of domestic seating
Furniture dimensional inspection	EN 13021 for dimensions and tolerances of furniture products

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Office lounge seating standard	ANSI/BIFMA X5.4 for lounge seating static, impact, and cyclic load tests
Seat static load test reference	ANSI/BIFMA X5.4 seat static loading procedure
Back strength test reference	ANSI/BIFMA X5.4 back-rest strength procedure
Leg and arm durability reference	ANSI/BIFMA X5.4 cyclic leg and arm loading procedures

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Furniture strength and durability reference	GB/T 10357.6 for single-seat furniture strength and durability test methods
Furniture stability reference	GB/T 10357.7 for furniture stability test methods
Wood furniture general technical condition	GB/T 3324 for wooden furniture dimensions, materials, tolerances, and workmanship
Upholstered furniture safety reference	GB 17927 for ignition resistance of upholstered furniture soft furnishings
Formaldehyde emission reference	GB 18584 for indoor decorative wood-based furniture limited harmful substances

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Furniture strength and durability reference：GB/T 10357.6 for single-seat furniture strength and durability test methods；
2. Furniture stability reference：GB/T 10357.7 for furniture stability test methods；
3. Wood furniture general technical condition：GB/T 3324 for wooden furniture dimensions, materials, tolerances, and workmanship；
4. Upholstered furniture safety reference：GB 17927 for ignition resistance of upholstered furniture soft furnishings；
5. Formaldehyde emission reference：GB 18584 for indoor decorative wood-based furniture limited harmful substances；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RC-ARM-8ST-WT

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RC-ARM-8ST-WT

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RC-ARM-8ST-WT打开导出工具

页面快速操作

发布采购询价

产品描述

The Eight-Seat Formal Reception Sofa Set with Center Table and Lace Headrest Covers presents a balanced, traditional seating arrangement for formal hospitality settings. Model RC-ARM-8ST-WT is an unbranded reception lounge seating set configured as eight individual chairs in two symmetrical facing rows, with a 600 by 600 mm wood side table at the center. Each armchair has an overall size of 900 by 850 by 900 mm, an independent 580 mm wide seat, fixed back support, and dual padded arms. The clear width between armrests is 540 mm. Dark stained block feet and a low perimeter base rail give the set a grounded, orderly appearance, while beige woven fabric and exposed dark wood rails create a restrained visual contrast. The upper back rail includes three open rectangular compartments with vertical separators, adding a decorative architectural detail and air circulation behind the cushion. Construction combines a dark stained hardwood or engineered-wood load-bearing frame with 50 by 50 mm visible posts and corner rails. The seat support uses a plywood or hardwood slat deck with a nominal 15 mm structural thickness. Seat cushions are high-resilience polyurethane foam, 120 mm thick and wrapped in polyester fiber, with a finished cushion thickness of 90 mm. Back cushions use shaped polyurethane foam 100 mm thick, with a soft fiber fill layer and 70 mm finished padding thickness. The beige matte woven upholstery has a nominal 0.8 mm face thickness, and padded arm tops sit over wood support boards. Fabric-covered side and front panels are enclosed by dark wood perimeter rails. Functional details suit upright, controlled reception use. The fixed seat angle is 5 degrees and the back angle is 100 degrees, encouraging a formal posture without swivel, recline, or rocking movement. A 240 mm lumbar support zone contributes to structured back support, and the fixed arms assist users when sitting or rising. The central table provides a shared surface for documents, cups, trays, or floral display. Removable white lace headrest and armrest covers can be washed or replaced to help preserve the main upholstery. The seating is appropriate for executive reception rooms, corporate or government waiting lounges, interview and meeting rooms, hotel business lounges, quiet consultation areas, and institutional guest spaces. The eight chairs may be used together or divided into smaller conversation groups, while senior-care or accessibility applications should be reviewed for project requirements. Procurement planning should note the unbranded product identity, stationary formal design, fabric-and-wood construction, and removable textile maintenance feature. Each chair has a net weight of 38 kg and a recommended per-seat user weight of 160 kg. The set is supplied as one set in two cartons, with reference assembly time of 40 minutes per set.

Eight-Seat Formal Reception Sofa Set with Center Table and Lace Headrest Covers Specifications

供应商与现货