| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 533 x 447 x 650 mm | |
|---|---|---|
| Tabletop thickness | 18 mm | |
| Drawer internal dimensions | 450 x 380 x 120 mm | |
| Drawer front panel thickness | 15 mm | |
| Leg top diameter | 35 mm | |
| Leg bottom diameter | 20 mm | |
| Leg splay angle | 15 degrees outward from vertical | |
| Floor clearance under drawer | 240 mm | |
| Recessed pull cutout width | 80 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 32 kg | |
|---|---|---|
| Product net weight | 12 kg | |
| Finish abrasion resistance | 400 cycles | |
| Recommended user weight on edge | 70 kg | |
| Leg floor protection pad load rating | 8 kg per leg | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 18mm engineered wood panel with light oak veneer | |
|---|---|---|
| Drawer body | 12mm MDF with matching oak finish | |
| Legs | Solid rubberwood with light oak stain | |
| Drawer glides | Side-mounted nylon roller glides | |
| Surface finish | Low-VOC clear lacquer topcoat | |
| Floor protection pads | Non-slip rubber pads fitted to leg bases | |
| Drawer handle | Integrated semicircular recessed wood cutout | |
| Joinery hardware | Zinc-plated steel cam lock and dowel connectors | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Drawer operation | Side-mounted roller glides allow full extension to 350mm | |
|---|---|---|
| Drawer stop | Integrated stop prevents drawer from fully falling out when fully opened | |
| Floor protection | Rubber foot pads prevent floor scratches and reduce movement on hard surfaces | |
| Storage function | Single enclosed drawer conceals small bedside items including books, chargers and accessories | |
| Tabletop use | Flat square top supports table lamps, books, small decor and personal items within rated load | |
| Assembly requirement | Flat-packed knockdown assembly with pre-drilled holes and included hardware | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Gross shipping weight | 14 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential bedroom bedside use | Placed adjacent to single or double beds to hold nighttime essentials | |
|---|---|---|
| Living room side end table use | Positioned next to sofas or armchairs to hold drinks, remotes and small decor | |
| Small entryway accent table use | Placed in narrow entry foyers to hold keys, mail and small decorative items | |
| Children's bedroom bedside use | Stable splayed leg design resists tipping for youth bedroom applications | |
| Short-term rental furnishing | Durable easy-clean finish and simple assembly suit Airbnb and rental property fitouts |
EU Market Access Requirements* EN Standards
| EN 312:2010 | Particleboard specifications, applicable for verifying engineered wood panel performance | |
|---|---|---|
| EN 12521:2015 | Domestic furniture strength and stability requirements for tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structuralAcceptance inspection | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wood furniture, applicable for formaldehyde emission testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structuralAcceptance inspection; 2. GB 18584-2001: Limit of harmful substances in wood furniture, applicable for formaldehyde emission testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
