| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 480 x 400 x 550 mm | |
|---|---|---|
| Drawer internal dimensions | 420 x 340 x 120 mm | |
| Open shelf internal dimensions | 420 x 340 x 180 mm | |
| Floor clearance under shelf | 130 mm | |
| Leg height | 150 mm | |
| Tabletop edge radius | 10 mm | |
| Drawer front panel thickness | 18 mm | |
| Carcass side panel thickness | 18 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 30 kg | |
|---|---|---|
| Product net weight | 12 kg | |
| Recommended number of users | 1 | |
| Surface abrasion resistance cycles | 1000 | |
| Drawer slide cycle rating | 50000 | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Carcass frame and panels | 18mm CARB P2 grade engineered wood with light oak wood veneer finish | |
|---|---|---|
| Drawer front panel | 18mm engineered wood with matte white UV-cured paint finish | |
| Support legs | Solid rubberwood tapered splayed legs with clear matte lacquer finish | |
| Drawer slides | Cold-rolled steel side-mount full-extension glides with zinc plating | |
| Open shelf surface | Matte light oak veneer matching carcass finish | |
| Tabletop surface | Sealed light oak veneer with rounded edges and water-resistant clear topcoat | |
| Drawer recessed pull | Integrated cutout handle routed into top edge of drawer front | |
| Hardware fasteners | Zinc-plated steel confirmat screws and cam lock fittings | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Upper drawer storage | 1 full-width pull-out drawer with recessed top-edge cutout pull, opens horizontally on metal glides for enclosed personal item storage | |
|---|---|---|
| Lower open storage | 1 full-width open cubby shelf with no door, provides instant-access storage for frequently used bedside items | |
| Elevated leg design | Four outward-angled tapered solid wood legs lift the carcass above floor level, allowing easy floor cleaning under the unit | |
| Rounded edge safety | All exposed tabletop and carcass edges have soft 10mm radius finish to reduce impact injury risk | |
| Surface protection | Sealed veneer and painted surfaces resist common household water splashes and minor scuffs from daily bedside use | |
| Assembly compatibility | Knock-down design with standard cam-lock fittings allows assembly with included basic tools within a short timeframe | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Residential bedroom bedside placement | Position adjacent to single or double beds to hold lamps, phones, books and nighttime personal items | |
|---|---|---|
| Small living room side end table use | Place next to sofas or armchairs to hold drinks, remotes and small decor items in compact living spaces | |
| Studio apartment multi-use storage | Serve as dual-purpose printer stand, entryway key table or small workspace side storage in tight urban dwellings | |
| Children's bedroom bedside storage | Used next to youth beds with rounded edge design reducing bump injury risk for younger users | |
| Short-term rental furnishing | Install in Airbnb, serviced apartment or dormitory settings for durable, easy-to-clean functional bedside storage |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops safety requirements, applicable for structural stability testing | |
|---|---|---|
| EN 12521:2015 | Domestic furniture strength durability and safety for seating-adjacent storage, applicable for load performance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural acceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials limit of harmful substances for wood-based furniture, applicable for formaldehyde emission testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural acceptance; 2. GB 18584-2001: Indoor decorating and refurbishing materials limit of harmful substances for wood-based furniture, applicable for formaldehyde emission testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
