Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1067 × 1067 × 737 mm
Overall table dimensions	1067 x 1067 x 737 mm
Tabletop diameter	1067 mm
Tabletop glass thickness	13 mm
Central umbrella hole diameter	57 mm
Table edge rim width	30 mm
Leg tube outer diameter	32 mm
Mid-height support ring diameter	450 mm
Central support column diameter	50 mm
Leg spread footprint diameter	1020 mm
Under-table knee clearance height	680 mm
Foot pad diameter	25 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Distributed tabletop static load capacity	75 kg
Recommended seating capacity	4 persons
Product net weight	17 kg
Frame rust resistance service life	3 years
Tempered glass impact resistance rating	Class A safety glass
Maximum compatible umbrella pole diameter	48 mm
Leveling adjustment range per foot	10 mm
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop	13 mm water-ribbed tempered safety glass
Table edge rim	1.2mm thick rolled steel tube with white powder coating
Leg assemblies	1.2mm thick bent steel tubular sections with white powder coating
Central support column	1.5mm thick welded steel tube with white powder coating
Mid-height support brace	1.0mm thick perforated steel ring with white powder coating
Foot pads	Injection-molded non-scuff polypropylene pads
Frame finish	80μm thick polyester powder coating over iron phosphate pre-treatment
Assembly hardware	Zinc-plated steel bolts and lock washers
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Umbrella pass-through	Central 57mm hole accepts standard patio umbrellas for dining shade
Leveling feet	Threaded adjustable feet compensate for up to 10mm of uneven patio slab surface
Knock-down assembly	Bolt-together construction requires only included hex key for full assembly
Wipe-clean surface	Smooth glass and powder-coated metal surfaces allow quick spill and debris removal
Weather-resistant construction	Sealed frame joints and powder coating resist rain, dew and UV exposure for outdoor use
Structural bracing	Mid-height steel ring connects legs to central column to reduce frame wobble
Non-marring contact	Plastic foot pads prevent scuffing and scratching on concrete, stone or wood patio surfaces
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential patio dining area	Sized to fit small balconies, concrete patios or deck spaces for casual outdoor meals
Bistro outdoor seating area	Compact round shape works for cafe, bistro or guesthouse outdoor patio seating zones
Poolside lounge area	Weather-resistant frame and easy-wipe glass surface tolerate splashes and humid pool environments
Garden lawn adjacent hardscaping	Stable splayed leg base sits securely on paved stone or concrete surfaces next to planting beds
Small urban balcony space	1067mm diameter footprint fits compact apartment balconies with space for 4 chairs
Temporary event seating	Quick assembly and stable design suits pop-up event, backyard party or catering outdoor setups

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 581-1:2017	Safety standard reference for outdoor residential patio furniture, covering general safety requirements
EN 581-3:2017	Mechanical safety requirement reference for outdoor dining tables, covering static load and stability
EN 12150-1:2015	Tempered soda-lime silicate safety glass standard reference for tabletop glazing

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements applicable for metal outdoor dining tables, covering dimensional stability and structural safety
GB 15763.2-2005	Safety requirement applicable for tempered glass used in furniture tabletop applications, covering break safety
GB/T 19001-2016	Quality management system reference for consistent manufacturing of finished outdoor furniture

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements applicable for metal outdoor dining tables, covering dimensional stability and structural safety;
2. GB 15763.2-2005: Safety requirement applicable for tempered glass used in furniture tabletop applications, covering break safety;
3. GB/T 19001-2016: Quality management system reference for consistent manufacturing of finished outdoor furniture;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · ODT-RND-GLS-WHT-1060

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · ODT-RND-GLS-WHT-1060

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · ODT-RND-GLS-WHT-1060Open Export Tool

Quick Actions

Post an RFQ

Product Description

This round outdoor patio dining table features a clean, approachable silhouette defined by its seamless circular tabletop and splayed four-leg base layout. The form prioritizes open, accessible seating around its perimeter, with no sharp corners to impede movement around the dining space, and a central integrated umbrella hole positioned to deliver even shade across the table surface for guests.
The table is built for durable outdoor use, starting with a water-ribbed tempered safety glass tabletop, rated Class A for impact resistance, secured within a rolled steel edge rim. All structural frame components—legs, central support column, and mid-height perforated steel bracing ring—are steel finished in an 80μm thick white polyester powder coating applied over an iron phosphate pre-treatment to support weather resilience. The frame connects to zinc-plated steel bolts and lock washers for assembly, and rests on injection-molded non-scuff polypropylene foot pads. The table supports a distributed static load of 75 kg across its surface, with the mid-height bracing ring linking splayed legs to the central column to minimize wobble during use.
Functional design elements cater directly to outdoor dining needs. The central umbrella hole accommodates standard patio umbrella poles, while threaded adjustable leveling feet compensate for uneven patio surfaces to keep the table stable. The smooth glass and powder-coated metal surfaces wipe clean quickly to remove spills and debris, and sealed frame joints alongside the powder coat finish resist rain, dew, and UV exposure. Non-marring foot pads protect concrete, stone, and wood patio surfaces from scuffs and scratches. Knock-down bolt-together assembly requires only the included hex key, with a typical assembly time of 40 minutes per unit, and is delivered across two cartons per set.
This table seats four people comfortably, making it suited for a wide range of spaces. It fits compact residential settings including small urban balconies, concrete patios, wood decks, and paved garden areas adjacent to planting beds, as well as commercial bistro, cafe, and guesthouse outdoor seating zones. Its weather-resistant construction also makes it appropriate for poolside lounge areas where it tolerates splashes and humid conditions, and its quick, stable assembly supports temporary event use for pop-ups, backyard gatherings, and outdoor catering setups.
Procurement teams and residential buyers should note the 3-year rust resistance service life for the steel frame, and confirm umbrella pole diameter compatibility to match preferred shade accessories. The unit’s knock-down format supports streamlined transport and storage, and the white powder-coated finish coordinates with a broad range of outdoor seating material and color palettes.

Round Tempered Glass Top Outdoor Patio Dining Table with Umbrella Hole Specifications

Suppliers and stock