| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 940 x 940 x 760 mm | |
|---|---|---|
| Table slat gap width | 10 mm | |
| Table leg section size | 60 x 60 mm | |
| Chair overall dimensions per unit | 610 x 670 x 920 mm | |
| Chair seat height | 420 mm | |
| Chair seat depth | 520 mm | |
| Chair seat width | 500 mm | |
| Chair backrest height | 460 mm | |
| Chair armrest height | 660 mm | |
| Umbrella hole diameter | 50 mm | |
| Knee clearance under table | 660 mm | |
| Minimum required clearance around set | 915 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Single chair static weight capacity | 163 kg | |
|---|---|---|
| Tabletop static weight capacity | 100 kg | |
| Total set assembled weight | 41 kg | |
| Set seating capacity | 4 people | |
| Finish UV fade resistance lifespan | 2 years | |
| Chair frame static load test rating | 200 kg | |
| Slat surface water drainage rate | 100% | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair slats | 12 mm thick matte black HDPE slats | |
|---|---|---|
| Structural framing | 30 x 30 mm black powder-coated steel square tube | |
| Fastening hardware | 304 stainless steel screws and bolts | |
| Chair foot pads | 8 mm thick non-slip nylon glides | |
| Tabletop edge trim | Matte black HDPE edge banding | |
| Armrests | Integral 40 mm wide HDPE/coated steel rails | |
| Surface finish | Textured matte black powder coat/HDPE colorant | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Tabletop drainage design | Horizontal slats with uniform gaps drain rainwater without pooling | |
|---|---|---|
| Center umbrella compatibility | Pre-drilled 50mm center hole accepts standard patio umbrellas | |
| Chair seating function | Fixed-position stationary armchairs with slatted seats and backs for air flow | |
| Chair stackability | Chairs stack vertically for off-season storage | |
| Surface maintenance | Smooth non-porous slats wipe clean with water and soft brush | |
| Uneven surface stability | Nylon glide feet adjust slightly for stability on grass or uneven patios | |
| Assembly design | Pre-drilled components with included hardware for bolt-together assembly | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio application | Suitable for backyard patios, garden decks, and balcony dining areas | |
|---|---|---|
| Commercial outdoor dining use | Appropriate for cafe patios, bistro outdoor seating, and resort terrace areas | |
| All-season outdoor placement | Designed for year-round outdoor use in rain and sun exposure | |
| Casual dining configuration | Ideal for everyday outdoor meals, small gatherings, and leisure drinks | |
| Low-maintenance installation | Suitable for rental properties and vacation homes with minimal upkeep requirements | |
| Small-space footprint | Fits compact outdoor areas with 940mm square footprint and required clearance |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture seating and tables safety requirements, structural stability benchmark | |
|---|---|---|
| EN 581-2:2019 | Outdoor furniture mechanical safety test methods for seating, strength validation reference | |
| EN 581-3:2019 | Outdoor furniture mechanical safety test methods for tables, load capacity validation reference |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural safety benchmarks | |
|---|---|---|
| GB/T 28007-2011 | Outdoor furniture general safety requirements, applicable for stability and load safety checks |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety benchmarks; 2. GB/T 28007-2011: Outdoor furniture general safety requirements, applicable for stability and load safety checks; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
