| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (table centered with chairs pulled out) | 2440 x 2440 x 940 mm | |
|---|---|---|
| Round dining table overall dimensions | 1524 mm diameter x 762 mm height | |
| Central table umbrella hole diameter | 60 mm | |
| Table pedestal base spread diameter | 762 mm | |
| Per dining armchair overall dimensions | 580 mm wide x 580 mm deep x 940 mm high | |
| Chair seat dimensions (cushion platform) | 510 mm wide x 500 mm deep | |
| Chair seat height (floor to top of cushion) | 460 mm | |
| Chair backrest height (seat surface to top of back) | 480 mm | |
| Chair armrest height (floor to top of arm) | 660 mm | |
| Seat cushion thickness | 50 mm | |
| Table apron clearance (floor to underside of table top) | 660 mm | |
| Cast aluminum frame wall thickness | 4 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total set net weight (reference) | 159 kg | |
|---|---|---|
| Maximum static load per dining chair | 136 kg | |
| Maximum distributed static load for table top | 159 kg | |
| Seating capacity | 6 people | |
| Powder coating UV fade resistance (exterior rating) | 1000 hours | |
| Cast aluminum frame rust/corrosion resistance | Lifelong for coated frames | |
| Cushion fabric water repellency rating | 800 mm | |
| Cushion foam quick-dry performance | 4 hours drying time after light rain exposure | |
| Adjustable foot glide vertical adjustment range | 10 mm | |
| Recommended residential warranty period | 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair frame construction | Sand-cast aluminum alloy with dark bronze powder-coated finish | |
|---|---|---|
| Round table top surface | Glazed ceramic tile with light gray grid pattern and central dark square inlay | |
| Table top edge trim | Matching cast aluminum dark bronze band with decorative scroll detail | |
| Table pedestal and support legs | Cast aluminum with curved scroll bracing connecting central column to base feet | |
| Seat cushion fabric | Solution-dyed polyester with multi-color horizontal stripe pattern | |
| Seat cushion fill | 50mm thick open-cell quick-dry polyurethane foam | |
| Cushion attachment hardware | Polyester fabric ties to secure cushions to chair seat frames | |
| Chair armrests | Integral cast aluminum matching dark bronze frame finish | |
| Chair leg feet | Nylon non-scratch adjustable glides | |
| Chair backrest construction | Ornate openwork cast aluminum scroll and lattice pattern | |
| Fastener hardware | Stainless steel bolts and nuts for knock-down assembly | |
| Table central insert | 60mm diameter plastic umbrella hole cap |
Adjustment / rotation / tilt / mobility / storage features
| Table configuration | Fixed round pedestal dining table with central umbrella hole for shade umbrella installation | |
|---|---|---|
| Chair design | Fixed-position non-swivel dining armchairs with open decorative backs | |
| Cushion functionality | Removable tie-on seat cushions with reversible covers for easy cleaning and seasonal storage | |
| Foot glide functionality | Twist-adjustable nylon glides on each leg to level furniture on uneven patio or deck surfaces | |
| Assembly requirement | Knock-down assembly required for table base and chair frames using included stainless steel hardware | |
| Surface drainage | Tile table top with sealed grout lines to shed rainwater without pooling | |
| Weather performance | Fully weather-resistant construction suitable for year-round exterior placement with minimal maintenance | |
| Seat ergonomics | Slightly curved cast aluminum seat pan to support cushions and reduce pressure points during extended seating | |
| Armrest functionality | Wide curved armrests integrated into chair frames for stable arm support during dining | |
| Backrest support | Contoured scrollwork backrest with upper lumbar support curve for upright dining posture | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio/deck dining | Suitable for backyard wooden decks, stone patios, and covered porches for family meals | |
|---|---|---|
| Small outdoor café seating | Appropriate for sidewalk café or bistro patio seating for 6 guests | |
| Garden or poolside dining area | Suitable for placement near pools or garden spaces due to rust-resistant aluminum construction | |
| Seasonal outdoor entertaining | Ideal for summer barbecues, holiday gatherings, and casual outdoor events seating 6 adults | |
| Balcony dining (large outdoor balconies) | Fits on large residential balconies with minimum 2.5m x 2.5m clear floor space | |
| Sunroom or three-season room use | Can be used in enclosed sunrooms as durable dining furniture with classic ornamental style | |
| Recommended complementary accessories | Paired with a 60mm diameter market patio umbrella and outdoor rug for full dining setup |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Safety requirements for outdoor seating furniture, applicable to chair structural stability and load capacity | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety requirements for outdoor tables, applicable to table stability and load performance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable to frame structural integrity and finish quality | |
|---|---|---|
| GB 28481-2012 | Restriction of hazardous substances in furniture, applicable to coating and fabric material safety | |
| GB/T 17657-2017 | Test methods for surface finish performance, applicable to coating abrasion and UV resistance testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable to frame structural integrity and finish quality; 2. GB 28481-2012: Restriction of hazardous substances in furniture, applicable to coating and fabric material safety; 3. GB/T 17657-2017: Test methods for surface finish performance, applicable to coating abrasion and UV resistance testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
