| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 1350 mm diameter x 760 mm height | |
|---|---|---|
| tabletop thickness | 20 mm | |
| gold apron trim height | 80 mm | |
| gold connection ring height | 25 mm | |
| pedestal bottom diameter | 550 mm | |
| pedestal top connection diameter | 180 mm | |
| undertable knee clearance height | 660 mm | |
| floor contact base ring width | 30 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| net weight | 95 kg | |
|---|---|---|
| distributed tabletop static load | 150 kg | |
| seating capacity | 6 people | |
| surface scratch resistance rating | 6H | |
| surface heat resistance | 180 °C | |
| pedestal static vertical load | 300 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop surface | Polished white sintered stone | |
|---|---|---|
| tabletop edge apron | Brushed gold-finished 304 stainless steel | |
| pedestal connection ring | Brushed gold-finished stainless steel | |
| main pedestal body | Matte black powder-coated A3 carbon steel | |
| tabletop backing substrate | 15 mm thick high-density MDF | |
| fastener hardware | Zinc-plated steel M10 mounting bolts | |
| floor protection pad | 3 mm thick non-marking EVA rubber | |
| gold trim surface treatment | PVD anti-tarnish brushed finish | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| support structure | Single central conical pedestal delivers 360-degree legroom without corner obstructions | |
|---|---|---|
| assembly method | Knock-down design with 6 mounting bolts securing tabletop to pre-assembled pedestal | |
| surface maintenance | Non-porous polished surface supports wet wiping without staining or water damage | |
| floor protection | Bottom EVA ring prevents hard metal contact from scratching polished hard floors | |
| use environment | Designed for fixed indoor dining use without outdoor weather sealing | |
| edge safety | Rounded 2 mm profile on gold trim eliminates sharp exposed edges | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| residential dining room | Suits 6-seater modern luxury dining sets for open-plan home dining spaces | |
|---|---|---|
| hotel hospitality areas | Fits boutique hotel restaurant private dining rooms for guest seating | |
| high-end apartment common areas | Works for luxury residential building shared dining and lounge zones | |
| showroom display | Matches premium furniture showroom luxury contemporary dining collections | |
| small event banquet spaces | Supports flexible intimate event dining setups for 4 to 6 guests |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Domestic furniture strength/durability/stability for dining tables | |
|---|---|---|
| EN 15187:2007 | Furniture surface scratch resistance test standard for table tops |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Desk and table products performance standard for structural load testing |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to hidden substrate structure | |
|---|---|---|
| GB/T 4893.1-2021 | Furniture surface cold liquid resistance test, applicable to stone top finish | |
| GB 28007-2011 | Furniture mechanical safety requirements, applicable to structural stability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to hidden substrate structure; 2. GB/T 4893.1-2021: Furniture surface cold liquid resistance test, applicable to stone top finish; 3. GB 28007-2011: Furniture mechanical safety requirements, applicable to structural stability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
