| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 550 x 550 x 500 mm | |
|---|---|---|
| Tabletop diameter | 550 mm | |
| Tabletop thickness | 10 mm | |
| Upper drum base diameter | 450 mm | |
| Lower flared base diameter | 480 mm | |
| Upper drum height | 220 mm | |
| Lower base height | 230 mm | |
| Floor contact pad diameter | 480 mm | |
| Under-table clearance | 0 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Net product weight | 12 kg | |
|---|---|---|
| Static tabletop load capacity | 40 kg | |
| Tip resistance load | 15 kg | |
| Surface abrasion resistance | 2000 cycles | |
| Tempered glass impact resistance | 1020 mm drop | |
| Warranty period | 1 year | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | 10mm black tempered glass with polished smooth edge | |
|---|---|---|
| Upper pedestal drum | 1.5mm thick brushed 304 stainless steel, satin finish | |
| Lower flared pedestal | 1.5mm thick brushed 304 stainless steel, tapered conical section | |
| Internal support structure | 1.2mm thick steel internal frame connecting top to base | |
| Floor protection pads | 5mm thick non-slip EVA rubber pads at base bottom | |
| Metal surface finish | Brushed satin stainless steel with clear anti-fingerprint lacquer | |
| Joint construction | TIG welded seamless joints between base sections | |
| Glass edge treatment | Flat polished perimeter edge, no sharp corners | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Assembly requirement | Fully assembled delivery, no on-site hardware installation required | |
|---|---|---|
| Floor leveling | Non-adjustable fixed base with pre-applied EVA grip pads | |
| Surface use | Smooth non-porous glass and metal surfaces, wipe-clean with damp cloth | |
| Mobility | Lightweight freestanding design, repositionable by lifting without disassembly | |
| Storage integration | No built-in shelves, drawers, or cable management features | |
| Placement orientation | Symmetric round design, no specific front/back orientation for flexible arrangement | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Living room sofa side placement | Position adjacent to sofas or armchairs to hold drinks, remote controls, and decorative objects | |
|---|---|---|
| Bedroom nightstand use | Place beside beds as a compact nightstand for lamps, phones, and bedtime items | |
| Lounge and reception area accent | Use in hotel lobbies, lounge areas, or office reception zones as a sculptural accent piece | |
| Small entryway hall table | Place in entryways to hold keys, mail, and small entry decor | |
| Balcony semi-outdoor use | Suitable for covered balconies with stainless steel corrosion-resistant base |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability, and safety requirements for domestic furniture tables, applicable for structural load testing | |
|---|---|---|
| EN 14073-2:2004 | Office and domestic storage furniture safety, applicable for tip stability verification | |
| EN 1036:2007 | Safety requirements for glass in furniture, applicable for tempered glass tabletop compliance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden/metal furniture, applicable for dimensional and structural stability checks | |
|---|---|---|
| GB 15763.2-2005 | Safety requirements for tempered glass used in furniture, applicable for tabletop impact and breakage safety | |
| GB/T 4893.9-2013 | Surface abrasion resistance test for furniture finishes, applicable for metal base durability assessment |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden/metal furniture, applicable for dimensional and structural stability checks; 2. GB 15763.2-2005: Safety requirements for tempered glass used in furniture, applicable for tabletop impact and breakage safety; 3. GB/T 4893.9-2013: Surface abrasion resistance test for furniture finishes, applicable for metal base durability assessment; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
