Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	710 × 660 × 810 mm
Seat cushion diameter	500 mm
Seat height from floor	480 mm
Seat cushion thickness	120 mm
Backrest vertical strap width	60 mm
Backrest height from seat surface	330 mm
Armrest height from floor	680 mm
Circular base ring diameter	580 mm
Metal frame tube diameter	25 mm
Quatrefoil cutout width	25 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended static weight capacity	136 kg
Net weight reference	15 kg
Seat foam density	40 kg/m³
Seat foam rebound rate	55%
Frame static load rating	200 kg
Upholstery abrasion resistance	30000 cycles
Floor protector load distribution	50 kg per foot
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Frame construction	25mm diameter brushed tubular steel, welded continuous hoop structure
Central back support	1.5mm thick flat brushed steel strap with stamped quatrefoil cutout
Seat cushion core	High-density polyurethane foam, cylindrical block form
Seat upholstery	White matte faux leather/PU fabric, stitched seam at cushion top perimeter
Base ring finish	Brushed metal finish with welded joint connections to vertical arm supports
Floor contact pads	Non-slip rubber pads fitted at base ring contact points
Frame corrosion protection	Clear brushed metal sealant coating over steel substrate
Seam construction	30mm stitch pitch along cushion top perimeter
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating support	Fixed cylindrical seat provides upright support for single adult users
Integrated armrests	Curved continuous hoop frame forms wraparound armrests at seated elbow height
Back support	Single central vertical strap provides targeted mid-back support with decorative cutout
Floor protection	Rubber base pads prevent floor scratches and reduce movement noise
Space efficiency	Compact circular footprint fits small bedrooms, vanity areas or lounge nooks
Fixed non-swivel structure	Welded frame forms rigid static base with no rotating or rocking mechanism
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Bedroom vanity area	Compact size fits at standard makeup desks with appropriate 480mm seat height
Living room accent seating	Minimalist metal design adds modern decorative seating beside sofas or windows
Small apartment lounge nook	Narrow circular footprint fits in tight spaces without blocking walkways
Commercial reception breakout area	Durable metal frame suits light-use waiting areas in modern offices or salons
Walk-in closet seating	Low-profile design provides convenient dressing seating without cluttering storage
Recommended pairing	Pairs with small round side tables and minimalists light-toned interior schemes
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Strength, durability and safety requirements for domestic seating furniture
EN 1022:2018	Stability test standard applicable to upright non-reclining domestic chairs

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements applicable to metal-frame domestic seating furniture
GB/T 16799-2008	Performance standard applicable to faux leather upholstery materials used for seating
GB 18584-2001	Indoor decoration material limit of harmful substances applicable to wooden/furniture components

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements applicable to metal-frame domestic seating furniture;
2. GB/T 16799-2008: Performance standard applicable to faux leather upholstery materials used for seating;
3. GB 18584-2001: Indoor decoration material limit of harmful substances applicable to wooden/furniture components;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · ATC-RND50-MTL-WHT

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · ATC-RND50-MTL-WHT

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · ATC-RND50-MTL-WHTOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The Brushed Metal Frame Round Upholstered Accent Tub Chair (model ATC-RND50-MTL-WHT) delivers streamlined, functional seating for residential and light commercial settings with a cohesive minimalist design. Its visual profile centers on a continuous curved frame that forms integrated wraparound armrests, rising from a circular base ring to create the classic tub chair silhouette. A single wide vertical steel strap runs down the center of the back, accented with a stamped quatrefoil cutout that balances structural support with subtle decorative detail, while the perfectly round, crisp white seat cushion contrasts sharply with the warm brushed metal finish for a clean, modern look. The chair’s rigid frame is constructed from 25mm diameter brushed tubular steel formed into a welded continuous hoop, with a clear sealant coating to protect against corrosion. All frame joints are fully welded for long-term structural rigidity, with non-slip rubber pads fitted at every base contact point to protect floor surfaces and reduce movement noise. The fixed, non-swivel base offers no rocking or rotating motion, supporting a 14mm bent plywood internal seat board that holds a cylindrical high-density polyurethane foam cushion; the foam carries a 40 kg/m³ density and 55% rebound rate, wrapped in matte white PU faux leather with evenly spaced perimeter stitching. Performance specifications include a 136 kg recommended static weight capacity, 30000-cycle upholstery abrasion resistance, and frame static load rating of 200 kg, with floor protector load distribution of 50 kg per foot. The chair provides upright fixed seating positioned at a 125° angle, with three supported lock positions, integrated armrests set at comfortable seated elbow height, and targeted mid-back support from the central back strap. Its compact circular footprint suits a wide range of spaces: it fits neatly at standard bedroom vanity desks, works as decorative accent seating beside living room sofas or windows, fills small apartment lounge nooks without blocking walkways, offers durable light-use seating for office or salon reception breakout areas, and serves as unobtrusive dressing seating in walk-in closets. It pairs naturally with small round side tables and light-toned minimalist interior schemes. For procurement teams, note the product ships as one set across two cartons, with a 40-minute per set assembly time, and supports loading of 135 sets per 20GP container at 85% space utilization.

Brushed Metal Frame Round Upholstered Accent Tub Chair Specifications

Suppliers and stock