Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	620 × 650 × 800 mm
Seat height (floor to seat top)	510 mm
Seat cushion width	500 mm
Seat cushion depth	480 mm
Seat cushion thickness	115 mm
Backrest height (seat top to back top)	445 mm
Armrest height (floor to arm top)	660 mm
Cantilever base depth (front to rear glide)	550 mm
Armrest pad length	220 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Single chair net weight	19 kg
Static weight capacity	150 kg
Fabric abrasion resistance	50000 cycles
Seat foam density	45 kg/m³
Seat foam rebound rate	60%
Frame wall thickness	1.5 mm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Frame construction	Matte black powder-coated carbon steel tube
Seat upholstery	Light beige woven polyester fabric
Backrest upholstery	Light beige polyester fabric with vertical channel stitching
Armrest pads	Padded light beige fabric over rigid support
Internal padding	High-density polyurethane foam
Seat support structure	Elastic webbing under seat cushion
Floor glides	Non-marking black plastic/rubber end caps
Seam stitch pitch	8 stitches per inch
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating function	Fixed non-swivel, non-reclining upright dining posture
Base flex feature	Slight controlled spring deflection from bent cantilever frame
Armrest support	Wrap-around padded arm support aligned to dining table elbow height
Floor protection	Non-scratching glides prevent hard floor damage
Back support	Curved semi-enclosed channel-stitched back for lumbar support
Assembly requirement	Minimal partial assembly for arm pad alignment
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining space	Suitable for home dining tables, providing upright seating for meals
Cafe and bistro use	Suitable for light commercial cafe seating with durable metal frame
Reception and meeting areas	Appropriate for informal visitor seating in office reception zones
Matching table height	Designed for use with standard 750 mm height dining tables
Floor suitability	Safe for hardwood, tile, and low-pile carpeted floors
Recommended configuration	Sold in sets of 2 for paired dining table placement
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Strength, durability and safety standard for domestic seating including dining chairs
EN 1022:2018	Stability test standard applicable to non-adjustable domestic dining chairs

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements applicable to wooden/metal framed dining furniture
GB/T 16799-2008	Applicable standard for furniture-upholstery leather performance testing
GB 18584-2001	Applicable limit standard for formaldehyde release in wooden interior furniture

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements applicable to wooden/metal framed dining furniture;
2. GB/T 16799-2008: Applicable standard for furniture-upholstery leather performance testing;
3. GB 18584-2001: Applicable limit standard for formaldehyde release in wooden interior furniture;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · DCA-CS-BF-620

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · DCA-CS-BF-620

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · DCA-CS-BF-620Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Light Beige Channel-Stitched Upholstered Cantilever Dining Armchair (model DCA-CS-BF-620) carries a streamlined modern and minimalist silhouette defined by a smooth, open cantilever sled base. Upholstered entirely in soft light beige fabric, the backrest features distinct vertical channel stitching that adds subtle textural depth without disrupting its clean, uncluttered profile. The wrap-around padded armrests sit at a height aligned to standard dining table elbow positions, while the smoothly curved, semi-enclosed backrest contours to deliver gentle lumbar support for upright seated posture. The chair’s frame is constructed from matte black powder-coated carbon steel tubing, paired with floor glides made of non-marking black plastic or rubber that sit flush with contact surfaces. The seat and back upholstery uses durable light beige woven polyester fabric, with high-density polyurethane foam padding supported by elastic webbing and a bent plywood internal support board. Armrests feature matching padded fabric covers set over rigid internal supports, and precise seam stitching ensures consistent upholstery durability. Designed for fixed, non-swivel, non-reclining upright dining positioning, the chair delivers a slight controlled spring deflection from its bent cantilever frame for gentle, responsive comfort during extended seating. The non-scratching glides protect hard flooring surfaces from scuffs and abrasion, making the chair safe for use on hardwood, tile, and low-pile carpet. The armchair fits a wide range of settings, from residential dining spaces paired with standard height dining tables, to light commercial cafes and bistros where durable metal frame construction supports regular guest use. It also works well for informal visitor seating in office reception and casual meeting areas. For procurement planning, note that the chair requires minimal partial assembly focused on arm pad alignment, with units sold in paired sets ideal for placement along dining table edges. Shipping and storage logistics account for delivery in multiple cartons per set, allowing for efficient container loading for large-scale commercial furnishing projects, while the robust frame and abrasion-resistant fabric support consistent regular use across both residential and light commercial applications.

Light Beige Channel-Stitched Upholstered Cantilever Dining Armchair Specifications

Suppliers and stock