Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	445 × 514 × 895 mm
Seat height	450 mm
Seat width	440 mm
Seat depth	420 mm
Seat panel thickness	22 mm
Backrest height above seat	445 mm
Central back slat width	80 mm
Circular back cutout diameter	40 mm
Leg diameter	35 mm
Front stretcher height above floor	295 mm
Rear leg spread width	425 mm
Knee clearance height under seat	270 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight per chair	6.4 kg
Static weight capacity	150 kg
Maximum recommended user weight	120 kg
Seat surface linear cutout width	8 mm
Joinery static load rating	300 kg
Floor protection glide diameter	20 mm
Finish abrasion resistance	1000 cycles
Warranty period	3 years
Available color options	4
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Frame and legs	Solid oak hardwood, natural matte clear lacquer finish
Seat panel	Solid hardwood planks with narrow linear gaps, smooth sanded finish
Central back slat	Solid hardwood panel with 40mm circular cutout, matching wood finish
Top back rail	Rounded solid hardwood dowel with rolled end caps, matching frame finish
Stretcher bracing	Solid hardwood diagonal and horizontal dowels, mortise-and-tenon joinery
Seat apron	Solid hardwood perimeter frame under seat, screwed and glued reinforcement
Floor glides	Injection-molded nylon with felt bottom pads, press-fit into leg ends
Surface finish	Low-VOC water-based matte lacquer, 0.15mm coating thickness
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating support	Fixed rigid wood seat with no recline, swivel or height adjustment
Back support	Single central slat provides lumbar support with open visual profile
Structural bracing	Diagonal and horizontal stretchers prevent leg racking under load
Floor protection	Replaceable felt glides prevent hardwood and tile floor scratching
Seat ventilation	Narrow linear seat cutouts allow air circulation and liquid drainage
Stacking capability	Non-stackable fixed frame design for permanent dining placement
Cleaning performance	Smooth lacquered wood surface wipes clean with dry or damp cloth
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining rooms	Pairs with standard 750mm height dining tables for daily meal seating
Cafes and casual restaurants	Smooth wood finish suitable for light commercial hospitality use
Home office or study rooms	Serves as compact guest or desk side chair for occasional work use
Waiting and lounge areas	Provides lightweight casual seating in reception or break room spaces
Small apartment living spaces	Narrow footprint fits compact urban apartment dining nooks
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Domestic furniture strength, durability and safety for seating, applicable to residential dining chair performance
EN 1022:2018	Domestic furniture seating determination of stability, applicable to chair tipping resistance testing

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to structural stability and finish quality
GB 18584-2001	Indoor decorating and refurbishing materials limit of harmful substances for wood furniture, applicable to formaldehyde emission limits

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural stability and finish quality;
2. GB 18584-2001: Indoor decorating and refurbishing materials limit of harmful substances for wood furniture, applicable to formaldehyde emission limits;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · WDC-001-OAK

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · WDC-001-OAK

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · WDC-001-OAKOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The WDC-001-OAK armless dining side chair carries a refined minimalist modern silhouette defined by clean geometric lines and intentional negative space. Its visual profile is anchored by a single central back slat fitted with a small circular cutout, topped by a rounded solid wood dowel rail with smooth rolled end caps. The slatted seat sits atop a sturdy frame braced by diagonal and horizontal wood stretchers, creating an open, lightweight aesthetic that avoids visual bulk even in compact spaces.
Constructed from solid oak hardwood finished with a low-VOC water-based matte clear lacquer, the chair uses robust mortise-and-tenon joinery for stretcher bracing, paired with screwed and glued reinforcement on the under-seat apron for long-term structural stability. The seat is formed from smooth-sanded solid hardwood planks separated by narrow linear gaps, supported by an internal bent plywood panel, while leg ends are fitted with press-fit injection-molded nylon glides with felt bottom pads. The natural wood finish highlights the material’s grain without high sheen, aligning with understated contemporary design schemes.
Functionally, the chair offers fixed rigid seating with no recline, swivel, or height adjustment, with the central back slat delivering targeted lumbar support through its open profile. The linear gaps in the slatted seat promote air circulation and allow incidental liquid drainage, while the smooth lacquered surface wipes clean easily with a dry or damp cloth for simple routine maintenance. The replaceable felt glides prevent scratching on hardwood and tile flooring, and the cross-braced stretcher base resists leg racking under regular use. It holds a static weight capacity of 150kg, with a maximum recommended user weight of 120kg.
This chair suits a broad range of spaces. In residential settings, it pairs with standard 750mm height dining tables for daily meal use, fits neatly into small apartment dining nooks thanks to its narrow footprint, and works as a compact guest or side chair in home offices and studies. For light commercial use, it is appropriate for cafes and casual restaurants, as well as casual seating in reception waiting areas and office break rooms.
For procurement, note this is a non-stackable fixed-frame design intended for permanent placement. Each set is shipped across two cartons, with an 40 minutes of assembly time per unit. A 20GP container can hold 135 sets at 85% space utilization, making it a practical option for both small residential orders and larger light commercial fit-outs.

Modern Solid Wood Armless Dining Side Chair with Circular Back Cutout Specifications

Suppliers and stock