Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	600 × 620 × 960 mm
seat height	467 mm
seat width	480 mm
seat depth	457 mm
arm height from floor	648 mm
backrest height above seat	370 mm
leg post thickness	35 mm
armrest width	50 mm
seat cushion thickness	80 mm
backrest cushion thickness	60 mm
stretcher clearance above floor	170 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

net weight per chair	19 kg
recommended static load capacity	150 kg
upholstery abrasion resistance	40000 cycles
frame static load rating	200 kg
foam density (seat)	45 kg/m³
foam density (backrest)	35 kg/m³
foam rebound rate	60%
seam stitch pitch	8 stitches per 30 mm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

frame construction	Solid hardwood with walnut tone finish
seat cushion core	High-resilience polyurethane foam
backrest cushion core	Medium-density polyurethane foam
upholstery surface	Wear-resistant faux leather
armrests	Integrated solid wood matching frame
structural stretchers	Solid wood horizontal bracing between legs
frame joinery	Mortise and tenon joint assembly
upholstery backing	Non-woven fabric inner liner
leg foot pads	Anti-scratch felt floor protectors
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

seating position	Fixed upright 5° back angle for dining posture
arm support	Integrated wood armrests at table clearance height
frame stability	Four-stretcher bracing system eliminates wobble
floor protection	Felt foot pads prevent hard floor scratches
upholstery maintenance	Smooth surface allows wipe-clean care
stacking capability	Non-stackable fixed wood frame design
swivel/recline function	No swivel, tilt, or recline mechanisms
assembly requirement	Knock-down assembly for leg and frame components
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

residential dining rooms	Pairs with standard 750mm height dining tables for daily meal seating
home office/study spaces	Suitable as guest or task seating at writing desks
hospitality venues	Usable in cafes, hotel private dining rooms, or lounge areas
small meeting spaces	Suitable for informal conference or breakout area seating
recommended table pairing	Works with 760 mm height dining or meeting tables
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Domestic furniture seating strength, durability and safety requirements, applicable for performance verification
EN 1022:2018	Domestic furniture seating stability test standard, applicable for tipping risk verification

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for frame strength verification
GB 18584-2001	Indoor decoration material wood furniture formaldehyde emission limit, applicable for panel/finish testing
GB/T 16799-2008	Faux leather upholstery material performance requirements, applicable for upholstery quality verification

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for frame strength verification;
2. GB 18584-2001: Indoor decoration material wood furniture formaldehyde emission limit, applicable for panel/finish testing;
3. GB/T 16799-2008: Faux leather upholstery material performance requirements, applicable for upholstery quality verification;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · WDA-600W

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · WDA-600W

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · WDA-600WOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The Walnut Finish Solid Wood Upholstered Dining Armchair, model WDA-600W, presents a refined, classic silhouette defined by a streamlined solid wood frame with integrated armrests, a structured upright back, and a generously padded seat and backrest. Its four-leg base is anchored by a coordinated bracing system, creating a balanced, visually grounded form that complements warm, natural interior palettes without excessive ornamentation.
Built for long-term regular use, the chair features a solid hardwood frame finished in a warm walnut tone, assembled with durable mortise and tenon joinery, and reinforced with solid wood horizontal stretchers between legs to eliminate wobble during daily use. The seat is filled with high-resilience polyurethane foam, paired with a medium-density foam backrest, both encased in a non-woven fabric inner liner and upholstered in smooth, wear-resistant faux leather. Armrests are carved from the same solid wood as the frame, matched to the walnut finish, and positioned at a height that clears standard table edges. Each leg is fitted with anti-scratch felt pads to protect hard floor surfaces from scuffs and marks.
Functionally, the chair is engineered for upright, supported dining posture with a fixed 5° back angle, with no swivel, tilt, or recline mechanisms to maintain consistent, stable seating. The smooth faux leather upholstery supports simple wipe-clean maintenance, making it well suited for high-traffic use, though its fixed solid wood frame does not allow for stackable storage. The design supports a recommended static load capacity suitable for regular adult use.
This armchair fits seamlessly across both residential and commercial spaces: it pairs effectively with standard height dining tables for home dining rooms, works as guest or task seating in home offices and studies adjacent to executive writing desks, and fits naturally in hospitality settings including cafes, hotel private dining rooms, and lounge areas, as well as informal small meeting or breakout spaces.
For procurement planning, each chair is delivered across two cartons, with a straightforward assembly process. The non-stackable design requires dedicated storage space for inventory, and purchasers should note the fixed upholstery and wood finish to coordinate with existing interior material palettes, while confirming table height compatibility to ensure comfortable arm clearance during use.

Walnut Finish Solid Wood Upholstered Dining Armchair Specifications

Suppliers and stock