Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	580 × 580 × 900 mm
seat diameter	580 mm
seat height from floor	495 mm
seat cylinder height	320 mm
seat cushion top thickness	80 mm
backrest height above seat	405 mm
backrest curved width	560 mm
metal frame tube diameter	20 mm
base ring diameter	570 mm
vertical back support bar count	3 units
floor clearance under seat	0 mm
seam stitch pitch on upholstery	8 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

net weight per chair	15 kg
recommended static load capacity	250 kg
seat foam density	45 kg/m³
seat foam rebound rate	45%
upholstery abrasion resistance	50000 cycles
metal frame static load rating	300 kg
available color options	6 variants
limited warranty period	1 year
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

seat outer upholstery	0.8mm thick cream PU faux leather, stain-resistant, easy-wipe surface
seat internal filling	High-density polyurethane foam, fully wrapped in non-woven fabric liner
backrest upholstery	Matching cream PU faux leather over curved foam padding
support frame	1.2mm thick black powder-coated carbon steel tube, rust and scratch resistant
circular base ring	Matching powder-coated carbon steel tube, fully welded to vertical supports
internal seat support panel	9mm thick multilayer plywood board, secured to frame with metal screws
frame floor contact pads	5mm thick non-slip PE plastic pads, prevent floor scratching
frame weld joints	Fully ground and smooth welded joints, powder-coated to match frame finish
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

seating function	Fixed-position armless seating for dining or accent use, no rotation or tilt
folding capability	Non-folding rigid welded frame structure, permanent fixed form
height adjustment	Fixed 495mm seat height, no gas lift or height adjustment mechanism
back support function	Curved half-backrest provides upper lumbar support for upright dining posture
floor protection	Inlaid plastic foot pads reduce friction and prevent hard floor scuffing
cleaning function	Smooth faux leather surface supports wipe-clean maintenance for spills
space efficiency	Compact circular footprint fits small dining nooks, cafe tables, or vanity desks
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

residential dining room	Pairs with 4-seat round or rectangular dining tables for daily meal use
cafe and bistro seating	Suitable for small commercial cafe tables, lightweight for easy repositioning
home vanity or dressing area	Fits compact vanity desks for makeup and grooming use, armless design saves space
small apartment accent seating	Works as spare side seating in living rooms or entry nooks, minimalist style matches modern decor
boutique reception area	Suitable for boutique studio or office reception waiting seating, easy to clean
hotel guest room seating	Fits hotel room desk or corner seating configurations, consistent modern aesthetic
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Domestic furniture strength, durability and safety requirements for seating
EN 1022:2018	Domestic furniture seating stability test methods for upright chairs
EN 13356:2018	Impact resistance requirements for non-upholstered and upholstered furniture frames

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for internal plywood structural components
GB/T 24821-2009	Performance requirements for metal furniture frames, applicable to steel tube structure
GB 18584-2001	Indoor decoration material formaldehyde emission limit for wooden furniture components
GB/T 39223.2-2020	Seating furniture stability and mechanical performance test methods for home use

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for internal plywood structural components;
2. GB/T 24821-2009: Performance requirements for metal furniture frames, applicable to steel tube structure;
3. GB 18584-2001: Indoor decoration material formaldehyde emission limit for wooden furniture components;
4. GB/T 39223.2-2020: Seating furniture stability and mechanical performance test methods for home use;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · DC-CRD-580900

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · DC-CRD-580900

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · DC-CRD-580900Open Export Tool

Quick Actions

Post an RFQ

Product Description

This cream upholstered armless accent dining chair, model DC-CRD-580900, features a clean, minimalist design defined by its cohesive circular layout and smooth, streamlined silhouette. Its cylindrical seat is paired with a curved half-backrest, all clad in a soft cream finish, and supported by a sleek black circular metal ring base that creates a light, open visual presence without protruding edges or bulky structural elements.
The chair is built for durable daily use, starting with a 0.8mm thick cream PU faux leather outer upholstery that offers a stain-resistant, easy-wipe surface. The seat and curved backrest are padded with high-density polyurethane foam, fully encased in a non-woven fabric liner, for consistent, supportive comfort. The structural core uses a multilayer bent plywood support panel secured to the frame, which is constructed from 1.2mm thick black powder-coated carbon steel tubing. The circular base ring is fully welded to vertical supports, with all weld joints ground smooth and finished to match the frame’s rust and scratch resistant coating; non-slip PE plastic pads at all floor contact points prevent scuffing on hard flooring surfaces.
Functionally, the chair delivers fixed, stable seating with no swivel, tilt, height adjustment, or folding mechanisms, keeping its form rigid and consistent over time. The curved backrest is shaped to provide upper lumbar support that encourages upright posture for dining, while the smooth faux leather surface allows quick wipe-down cleaning for spills. Its compact circular footprint makes it highly space-efficient, and it is light enough to reposition easily as needs change.
This model suits a wide range of both residential and commercial spaces. In homes, it pairs well with 4-seat round or rectangular dining tables for daily meals, tucks neatly beside compact vanity desks for grooming use, or serves as spare accent seating in small apartment living rooms and entry nooks, complementing modern decor schemes. For commercial settings, it works for small cafe and bistro tables, boutique studio or office reception waiting areas, and hotel guest room desk or corner seating configurations, with its easy-clean surface supporting high-traffic use. Six color variants are available to match different interior palettes.
For procurement planning, note that each chair ships across two cartons, with an assembly time of 40 minutes per unit. Load planning for 20-foot containers accommodates 135 sets at standard space utilization rates, making the model suitable for both small residential orders and larger commercial fit-outs. The fixed seat height and armless design make it a versatile, consistent choice for spaces where a uniform, uncluttered modern aesthetic is a priority.

Cream Upholstered Armless Accent Dining Chair with Black Metal Ring Base Specifications

Suppliers and stock