Name: Mid-Century Dark Walnut Wood Dining Armchair with Grey Upholstered Seat
Brand: Fanshidun
SKU: KPPLG2

Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	545 × 585 × 775 mm
seat width	480 mm
seat depth	460 mm
seat height from floor	455 mm
backrest height above seat	320 mm
armrest height from floor	585 mm
armrest height above seat	130 mm
front leg cross-section	30 x 30 mm
rear leg cross-section	30 x 30 mm
seat cushion thickness	50 mm
backrest thickness	20 mm
leg splay angle	8 degrees
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

net weight per chair	14.5 kg
recommended static load capacity	113 kg
cushion foam density	35 kg/m³
foam rebound rate	45%
upholstery fabric abrasion resistance	30000 Martindale cycles
frame joint static load rating	150 kg
applicable user count	1 person
floor protection load rating	120 kg per foot cap
recommended warranty period	3 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

frame structure	Solid rubberwood with dark walnut stain finish
seat cushion upholstery	Woven polyester fabric, 0.8mm thickness, light grey
cushion core	High-density polyurethane foam, flame-retardant treated
backrest panel	Solid rubberwood with matching walnut finish, smooth lacquer topcoat
armrests	Solid rubberwood, integrated with front leg posts, rounded edge profile
leg components	Tapered solid rubberwood, splayed outward for stability, sanded smooth finish
joinery hardware	Zinc-plated steel dowels, wood screws, corner brackets for KD assembly
foot caps	Non-marking polyethylene plastic caps fitted to each leg base
seat support base	12mm thick plywood support panel under cushion
surface finish	Low-sheen matte nitrocellulose lacquer on wood surfaces
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

seating function	Upright seated support for dining use with lumbar back contact
arm support	Integrated curved armrests provide forearm rest during seated dining
assembly requirement	Knock-down assembly required with included hardware and manual
floor protection	Non-marking foot caps prevent scratching hard flooring surfaces
stacking capability	Non-stackable fixed frame design
recline function	Fixed 95-degree seat-to-back angle, no recline or tilt mechanism
cushion attachment	Removable seat cushion secured with hook-and-loop fasteners
surface maintenance	Wipe-clean wood surfaces and spot-clean fabric upholstery
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

home dining room use	Paired with 750mm height dining tables for daily family meals
restaurant and cafe seating	Suitable for commercial dining venues with mid-century modern interior design
home office guest seating	Used as side guest chair next to desks in minimalist home offices
apartment dining nook use	Ideal for small apartment dining areas due to compact armchair footprint
co-working space breakout areas	Used in casual breakout and lounge zones for short-term seating
hospitality suite seating	Deployed in hotel suite dining and living areas for guest seating
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Domestic furniture seating strength, durability and safety requirements for home dining use
EN 1022:2018	Seating furniture determination of stability, applicable to four-leg chair tip resistance

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to solid wood frame strength and finish quality
GB 18584-2001	Limit of harmful substances in wooden furniture, applicable to formaldehyde emission from wood components
GB/T 29894-2013	Furniture seating mechanical performance test methods, applicable to static load and durability testing

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood frame strength and finish quality;
2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to formaldehyde emission from wood components;
3. GB/T 29894-2013: Furniture seating mechanical performance test methods, applicable to static load and durability testing;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · WDAC-MCM-GR-001

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · WDAC-MCM-GR-001

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · WDAC-MCM-GR-001Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Fanshidun WDAC-MCM-GR-001 is a mid-century modern wooden dining armchair defined by its refined, timeless silhouette. It features a four-legged design with splayed, tapered legs paired with integrated armrests that flow seamlessly from the front leg posts, finished with soft rounded edges for a polished, approachable look. The wood frame carries a rich dark walnut stain, topped with a smooth lacquer coat on the solid backrest panel that complements the light grey woven polyester upholstered seat, creating a balanced contrast between warm wood tones and neutral soft fabric.
Crafted for lasting structure, the chair’s frame is built from solid rubberwood, joined with zinc-plated steel dowels, wood screws and corner brackets for knock-down assembly. A 12mm thick plywood panel sits beneath the seat cushion, which is filled with flame-retardant treated high-density polyurethane foam. Each leg is fitted with non-marking polyethylene foot caps, and the upholstery fabric is a durable woven polyester material. The removable seat cushion is secured with hook-and-loop fasteners for easy care.
Designed for upright, supported dining use, the chair holds a fixed 95-degree seat-to-back angle with no recline mechanism, providing consistent lumbar contact during meals. The integrated curved armrests offer comfortable forearm support, while the non-marking foot caps prevent scratches on hard flooring surfaces. The chair accommodates single users and features a non-stackable fixed frame.
This armchair suits a wide range of both residential and commercial spaces. In homes, it pairs with standard height dining tables for family meals, fits compact apartment dining nooks thanks to its streamlined footprint, and works as guest seating in minimalist home offices. For commercial settings, it is well-suited to mid-century modern restaurants, cafes, co-working space breakout zones, and hotel suite dining and living areas.
For procurement planning, note that knock-down assembly is required, with all necessary hardware and instructions included. Each chair ships across two cartons; the non-stackable design should be accounted for in storage planning, and load ratings should align with intended use cases to support long-term performance.

Mid-Century Dark Walnut Wood Dining Armchair with Grey Upholstered Seat Specifications

Suppliers and stock