| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 700 x 750 mm | |
|---|---|---|
| Table top thickness | 36 mm | |
| Left cylindrical support diameter | 450 mm | |
| Left cylindrical support height | 714 mm | |
| Right slatted support outer width | 520 mm | |
| Right support vertical bar thickness | 20 mm | |
| Embedded kidney tea tray dimensions | 900 x 220 mm | |
| Tea tray recess depth | 15 mm | |
| Undertable knee clearance height | 680 mm | |
| Right support floor contact bar length | 500 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Table top uniform static load capacity | 150 kg | |
|---|---|---|
| Net product weight | 110 kg | |
| Recommended seating capacity | 4 persons | |
| Table top heat resistance | 180 °C | |
| Surface scratch resistance (Mohs hardness) | 6 | |
| Structural frame static load rating | 300 kg | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table top substrate | 36mm thick sintered stone with grey-beige natural veining, polished finish | |
|---|---|---|
| Edge trim | Matte dark gunmetal powder-coated steel edging along full table perimeter | |
| Left support structure | Seam-welded matte gunmetal steel cylindrical column with rounded floor base plate | |
| Right support structure | Vertical matte gunmetal powder-coated steel slats with curved integrated floor frame | |
| Embedded tea tray | Matte black engineered black gold stone with sloped drainage surface and drain outlet | |
| Internal bracing | 1.5mm thick rectangular steel cross-bracing connecting both supports under the top | |
| Floor protection pads | Non-slip 5mm thick EVA rubber pads affixed to all base contact points | |
| Surface finish (metal parts) | Scratch-resistant matte powder coating with low-gloss gunmetal finish | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Integrated tea preparation zone | Central recessed kidney tray provides dedicated level surface for tea brewing and drainage | |
|---|---|---|
| Asymmetrical base seating access | Open right slat support allows unobstructed leg room for 3 seated positions along the curved edge | |
| Drainage integration | Tray includes pre-drilled central drain outlet for connection to external waste water container | |
| Stable freestanding installation | Knock-down assembly requires top to base bolted connection, no wall fixation needed | |
| Surface maintenance | Non-porous sintered stone top allows immediate wipe cleaning of tea stains with neutral detergent | |
| Load distribution design | Dual-point asymmetrical support spreads heavy stone top weight evenly to avoid tipping | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Shipping carton dimensions (largest package, stone top) | 1900 x 800 x 120 mm | |
|---|---|---|
| Shipping carton dimensions (base packages) | 800 x 600 x 800 mm each | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Office reception tea area | Fits executive office reception zones for hosting guest tea service with 4 seats | |
|---|---|---|
| Villa living room casual seating area | Complements modern light luxury interior decor for home tea and beverage service | |
| High-end private tea room | Serves as dedicated tea brewing station for commercial or private tea rooms | |
| Balcony leisure space | Compact 1800mm length fits enclosed balconies for casual home tea drinking | |
| Executive lounge area | Provides formal yet functional serving surface for client meetings and refreshments |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
