| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (L×W×H) | 1200 × 650 × 500 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Embedded tea appliance cutout size | 370 × 230 mm | |
| Tea tray placement area size | 600 × 300 mm | |
| Lower storage shelf clearance from floor | 180 mm | |
| Leg assembly width per unit | 200 mm | |
| Tabletop overhang around frame | 20 mm | |
| Metal frame tube wall thickness | 1.5 mm | |
| Knee clearance height under tabletop edge | 420 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total table static distributed load capacity | 150 kg | |
|---|---|---|
| Integrated electric kettle capacity | 1 L | |
| Sterilizer pot usable volume | 0.8 L | |
| Tabletop heat resistance temperature | 1200 °C | |
| Tabletop surface abrasion resistance | 6000 revolutions | |
| Unit net weight (without appliances) | 38 kg | |
| Recommended serving capacity | 4 persons | |
| Frame anti-rust coating durability | 10 years | |
| Lower shelf load surface dimensions | 1100 × 550 mm | |
| Top Static Load Reference | 150 kg uniformly distributed |
Core acceptance fields · Panels / hardware / frame / upholstery
| Primary tabletop | 12mm white marble-veined sintered stone, polished finish, black edge trim | |
|---|---|---|
| Structural frame | Black powder-coated carbon steel tubing and solid panels, matte finish | |
| Angled leg slats | 1.5mm wall thickness round carbon steel tubes, welded to perimeter base frame | |
| Central leg support panels | 2mm thick matte black steel sheet, welded to frame for torsional rigidity | |
| Lower storage shelf | Matte black steel panel, perforated or solid, fixed to perimeter cross braces | |
| Integrated kettle and sterilizer | Food-grade 304 stainless steel, electric heating elements, insulated handles | |
| Appliance mounting base | Heat-resistant black phenolic composite recessed insert, sealed to tabletop | |
| Assembly hardware | Zinc-plated steel bolts and lock washers, pre-threaded frame mounting points | |
| Surface coating on frame | Epoxy-polyester hybrid powder coat, 80μm thickness, scratch-resistant | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Integrated tea station function | Recessed electric kettle and sterilizer with automatic top water feed, boil-dry protection | |
|---|---|---|
| Lower shelf storage function | Fixed open steel shelf accommodates clean/waste water buckets, tea canisters and spare teaware | |
| Assembly configuration | Knock-down flat-pack design with 3 leg assemblies attached to tabletop via bolted connections | |
| Surface use function | Stain-resistant non-porous sintered stone top supports direct placement of hot a kettles and teaware without heat pads | |
| Frame stability function | Dual A-frame geometric leg structure with perimeter base bracing prevents lateral wobble on even floors | |
| Tea service layout function | Dedicated flat tea tray zone separate from appliance zone prevents cross-contamination of boiling water and serving ware | |
| Floor protection function | Hidden non-marking PP foot pads under each frame corner prevent scuffing on hard floors and carpet | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Office reception area | Fits 3seat reception sofas for guest tea service during business meetings | |
|---|---|---|
| Modern living room | Serves as a dual-function coffee table and gongfu tea station for home tea enthusiasts | |
| Tea room and lounge | Provides dedicated tea preparation surface for small casual tea tasting sessions for 4 users | |
| Executive private office | Placed adjacent to visitor seating for informal tea receptions with business partners | |
| Small apartment open-plan space | Combines coffee table and dedicated tea table function to reduce redundant furniture footprint |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability and safety requirements for domestic and contract tables | |
|---|---|---|
| EN 60335-1:2012 | Safety standard for household electrical appliances covering integrated tea heating units | |
| EN 13722:2004 | Performance requirements for metal furniture frames used in indoor seating and tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture applicable to hard-surface table tops and structural stability | |
|---|---|---|
| GB 4706.1-2005 | Safety standard for household and similar electrical appliances covering integrated electric tea kettles | |
| GB/T 19001-2016 | Quality management system guideline for consistent furniture production and component sourcing | |
| GB 18584-2001 | Limit of harmful substances for wooden furniture applicable to any bonded trim or coating materials |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture applicable to hard-surface table tops and structural stability; 2. GB 4706.1-2005: Safety standard for household and similar electrical appliances covering integrated electric tea kettles; 3. GB/T 19001-2016: Quality management system guideline for consistent furniture production and component sourcing; 4. GB 18584-2001: Limit of harmful substances for wooden furniture applicable to any bonded trim or coating materials; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
