| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 2000 x 800 x 750 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Embedded tea tray dimensions | 800 x 300 mm | |
| Under-table knee clearance height | 680 mm | |
| Side support pillar section | 150 x 150 mm | |
| Central support cabinet width | 400 mm | |
| Matching chair overall dimensions | 580 x 550 x 750 mm | |
| Chair seat height | 450 mm | |
| Chair seat cushion thickness | 50 mm | |
| Table edge overhang | 50 mm | |
| Central support cabinet height | 720 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Table static distributed load capacity | 200 kg | |
|---|---|---|
| Tabletop heat resistance | 180 °C | |
| Tabletop surface abrasion resistance | 6000 revolutions | |
| Set total net weight | 140 kg | |
| Recommended maximum seated users | 5 people | |
| Product structural warranty | 3 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface | 12mm polished grey sintered stone with natural marble pattern | |
|---|---|---|
| Table support frame | 1.5mm thick carbon steel with matte black powder-coated finish | |
| Embedded tea tray | Black matte sintered stone panel with recessed drainage channel | |
| Central base panel | Dark brown engineered wood panel with matching sintered stone inlay | |
| Chair frame | 1.2mm thick carbon steel with matte black powder-coated welded construction | |
| Chair seat upholstery | 0.8mm thick matte dark grey faux leather over high-density foam | |
| Chair backrest slats | Solid black metal vertical slats with curved top rail | |
| Included lumbar cushions | Dark grey linen-blend fabric filled with 30D resilient foam | |
| Foot pads | Non-slip plastic floor protection pads on all frame feet | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Integrated tea service system | Centrally recessed tea tray with hidden internal drainage pipe connection | |
|---|---|---|
| Central base storage compartment | Enclosed hollow central base space with rear access for water bucket storage | |
| Anti-tip structural design | Three-point support base with floor contact across full support width | |
| Stain-resistant tabletop surface | Non-porous sintered stone finish that wipes clean with damp cloth | |
| Chair ergonomic design | Curved armrests and vertical back slats with separate lumbar support pillow | |
| Stackable chair configuration | Metal frame chairs with open leg design allow nesting for compact storage | |
| Knock-down assembly design | Frame and top ship flat with bolted connector hardware | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Office reception space | Suitable for executive reception areas to host client tea meetings | |
|---|---|---|
| Home tea room | Fits dedicated home tea rooms or open-plan living room tea corners | |
| Commercial tea house | Appropriate for private booth seating in commercial tea establishments | |
| VIP lounge area | Works in hotel or club VIP lounge spaces for guest hospitality | |
| Balcony casual space | Suitable for large covered balcony areas for casual family tea gatherings | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Applicable to strength, durability and safety requirements for domestic dining tables | |
|---|---|---|
| EN 1022:2018 | Applicable to seating stability requirements for domestic and contract chairs | |
| EN 16139:2013 | Applicable to strength, durability and safety for non-domestic seating |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable to general technical requirements for wooden furniture cabinet base panels | |
|---|---|---|
| GB 18584-2001 | Applicable to indoor decoration material limit of harmful substances for furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable to general technical requirements for wooden furniture cabinet base panels; 2. GB 18584-2001: Applicable to indoor decoration material limit of harmful substances for furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
