Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	2540 × 1120 × 770 mm
Tabletop thickness	20 mm
Under-table knee clearance height	720 mm
Left pedestal footprint	600 x 400 mm
Right pedestal footprint	400 x 200 mm
Long-side seating space per person	630 mm
End-side seating space per person	1120 mm
Tabletop overhang from base edge	80 mm
Individual bronze cylinder diameter (left base)	120 mm
Right support slab thickness	20 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Tabletop static distributed load capacity	250 kg
Tabletop heat resistance (sealed finish)	100 °C
Structural warranty period	3 years
Supported seating capacity	6 people
Finish abrasion resistance (metal base)	5000 cycles
Net weight (complete table)	200 kg
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop	Polished natural veined brown-grey marble, sealed stain-resistant surface
Left base assembly	Cast iron with electroplated antique bronze finish, clustered vertical cylinders
Right base assembly	Thick-gauge steel with electroplated antique bronze finish, single vertical slab
Tabletop edge	Smooth eased polished edge, no sharp corners
Base floor contact pads	Non-slip rubber pads to protect floor surfaces
Assembly hardware	Zinc-plated steel M10 mounting bolts with lock washers
Stone surface sealer	Penetrating matte sealer for stain and water resistance
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Fixed structure design	Non-extendable, non-adjustable rigid frame for stable tea and dining use
Leveling adjustment	Threaded floor pads on base feet to compensate for uneven floors
Surface utility	Smooth non-porous sealed surface suitable for hot tea service and dining ware
Seating access	Open under-table space allows chair placement on all four sides
Surface maintenance	Sealed finish allows wipe-clean care for spills and tea stains
Load distribution	Dual pedestal design spreads weight evenly to prevent tabletop flex
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Luxury home dining room	Serves 6 people for formal family meals and tea gatherings, fits 3m+ wide dining spaces
Private tea room or club lounge	Provides dedicated surface for formal tea service for small groups
Upscale boutique hotel dining suite	Coordinates with matching New Chinese style armchairs for guest reception areas
Open-plan living area dining zone	Low-profile asymmetrical base creates visual interest without blocking sight lines
Executive reception lounge	Functions as a meeting table for small casual discussions and light refreshments

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Furniture surface durability	EN 15185:2011
Furniture stability testing	EN 1730:2012
Furniture mechanical safety	EN 12521:2015

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Tabletop stone safety	GB 6566
Furniture structural safety	GB/T 3324
Metal coating durability	GB/T 1993
Formaldehyde emission	GB 18584

Standardized tender description text

This product must meet the following technical requirements:
1. Tabletop stone safety: GB 6566;
2. Furniture structural safety: GB/T 3324;
3. Metal coating durability: GB/T 1993;
4. Formaldehyde emission: GB 18584;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · DT-NM6-AB2540

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · DT-NM6-AB2540

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · DT-NM6-AB2540Open Export Tool

Quick Actions

Post an RFQ

Product Description

The 6-Seat Rectangular Natural Veined Marble Dining Tea Table, model DT-NM6-AB254, is an unbranded fixed-rectangular table designed for integrated dining and tea service use, with a distinct New Chinese style aesthetic anchored by its asymmetrical bronze metal pedestal bases. Measuring 2540 x 1120 x 770 mm overall, the table balances substantial presence with open, unobstructed sight lines: the larger left pedestal, formed from clustered vertical cast iron cylinders, occupies a 600 x 400 mm footprint, while the slimmer right pedestal, a single thick-gauge steel vertical slab, takes a 400 x 200 mm footprint. Both bases feature an electroplated antique bronze finish, with non-slip rubber contact pads to protect floor surfaces and threaded adjustable feet to compensate for uneven flooring. The 20 mm thick polished natural brown-grey marble tabletop has a smooth eased edge with no sharp corners, finished with a penetrating matte sealer that delivers stain and water resistance, withstanding surface temperatures up to 100 °C and resisting 5000 cycles of abrasion on metal base finishes. The dual pedestal design spreads weight evenly to prevent tabletop flex, supporting 250 kg of static distributed load across the surface, with 720 mm of under-table knee clearance and 80 mm of tabletop overhang from base edges to allow comfortable chair placement on all four sides. The table offers 630 mm of long-side seating space per person and 1120 mm of end-side seating space, accommodating six people total, with a smooth non-porous surface that wipes clean easily to address spills and tea stains. It also includes integrated cable management with capacity for 10 power or data cables, supported by a tray rated for 10 kg load, while the rigid non-extendable, non-adjustable frame ensures consistent stability for regular use. The table is well suited for luxury home dining rooms in spaces 3m wide or larger, where it supports formal family meals and tea gatherings; it also fits private tea rooms, club lounges, upscale boutique hotel dining suites, open-plan living area dining zones, and executive reception lounges for small casual discussions and light refreshment service, coordinating seamlessly with matching New Chinese style armchairs. Procurement teams should note the product ships as one set across two cartons, with a packaged gross weight of 90 kg and total packaging volume of 0.55 m³, requiring 40 minutes of on-site assembly with included zinc-plated steel M10 mounting bolts and lock washers. The structure comes with a 3-year structural warranty, and the complete assembled unit has a net weight of 200 kg, requiring appropriate handling during placement.

6-Seat Rectangular Natural Veined Marble Dining Tea Table with Asymmetrical Bronze Metal Bases Specifications

Suppliers and stock