| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 800 x 750 mm | |
|---|---|---|
| Sintered stone tabletop thickness | 12 mm | |
| Embedded tea tray dimensions | 1200 x 300 x 20 mm | |
| Central seated knee clearance width | 1000 mm | |
| Seated knee clearance height (under table) | 650 mm | |
| Seated knee clearance depth | 400 mm | |
| End support pedestal dimensions | 400 x 800 x 720 mm | |
| Matching armchair overall dimensions | 620 x 580 x 750 mm | |
| Armchair seat height | 450 mm | |
| Armchair seat depth | 500 mm | |
| Armrest height above seat | 220 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Table static load capacity | 200 kg | |
|---|---|---|
| Table net weight (without chairs) | 85 kg | |
| Sintered stone surface heat resistance | 1200 °C | |
| Sintered stone surface abrasion resistance | Level 5 | |
| Tea tray drain flow rate | 1.5 L/min | |
| Recommended seating capacity | 4 users | |
| Frame structure warranty period | 10 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface | 12mm polished sintered stone with white marble pattern | |
|---|---|---|
| Embedded tea tray | 20mm polished black natural stone with recessed drain channel | |
| Structural frame | 20x40mm rectangular carbon steel tubing with matte dark gunmetal finish | |
| End support panel cladding | 18mm E1-grade engineered wood with matte cream paint finish | |
| Armchair frames | 18mm diameter round carbon steel tubing with matching matte gunmetal finish | |
| Chair seat cushions | 40mm high-density polyurethane foam with 0.8mm matte grey polyurethane upholstery | |
| Decorative throw pillows | 20mm soft polyester fiber fill with grey woven fabric cover | |
| Floor contact pads | 5mm thick non-slip rubber pads on all frame leg bases | |
| Edge banding | 2mm matte black PVC edge trim along sintered stone tabletop perimeter | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Integrated tea drainage system | Recessed central stone tray routed to hidden drain pipe for connection to below-table waste bucket | |
|---|---|---|
| Central open knee well | Unobstructed central clearance between end pedestals to allow seated users to face table for tea service | |
| Stable support structure | Dual enclosed end pedestals with internal cross bracing to prevent table wobble during tea preparation | |
| Hidden storage cavity | Internal empty space within end pedestals to accommodate water bucket, tea canisters and kettle accessories | |
| Leveling adjustment | Threaded adjustable foot pads on each leg base to compensate for uneven floor surfaces | |
| Chair seating comfort | Vertical metal slat back supports with padded seat cushions for upright relaxed posture during extended tea sessions | |
| Knock-down assembly | Detachable frame and tabletop design for flat-pack shipping and on-site assembly | |
| Modular kettle compatibility | Pre-routed cable pass-through to support optional automatic water feed and electric tea kettle installation | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Office reception areas | Suitable for executive reception lounges to host guest tea meetings, professional modern aesthetic | |
|---|---|---|
| Home tea rooms | Ideal for dedicated residential tea rooms for family and friend gongfu tea sessions, comfortable 4-person seating | |
| Hotel private dining suites | Appropriate for high-end hotel private rooms to offer welcome tea service for guests, durable easy-clean surface | |
| Tea house commercial seating | Suitable for boutique tea house individual booth seating, sturdy metal frame for high-frequency daily use | |
| Open-plan living areas | Fits modern open concept living spaces as a multi-purpose surface for casual dining and tea service | |
| Executive private offices | Can be placed in executive private offices for informal meetings and personal tea breaks, standard 750mm seated height | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Furniture stability testing | EN 1730:2012 | |
|---|---|---|
| Surface resistance to dry heat | EN 12721:2013 | |
| Upholstered furniture flammability | EN 1021:2014 |
Standards applicable to China-market projects
| Tabletop material safety | GB 6566 | |
|---|---|---|
| Engineered wood panel emission | GB 18580 | |
| Furniture structural safety | GB/T 3324 | |
| Metal furniture durability | GB/T 3325 |
This product must meet the following technical requirements: 1. Tabletop material safety: GB 6566; 2. Engineered wood panel emission: GB 18580; 3. Furniture structural safety: GB/T 3324; 4. Metal furniture durability: GB/T 3325; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
