| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 700 x 550 mm | |
|---|---|---|
| Table top thickness | 12 mm | |
| Embedded tea tray dimensions | 600 x 400 mm | |
| Left cabinet dimensions | 450 x 700 x 538 mm | |
| Right angled metal leg section | 50 x 30 mm rectangular tube | |
| Vertical slat grille spacing | 40 mm between bars | |
| Lower open shelf clearance below top | 220 mm | |
| Lower shelf depth | 400 mm | |
| Right-side leg setback from edge | 80 mm | |
| Knee clearance height under right top | 500 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total product weight | 60 kg | |
|---|---|---|
| Distributed static table top load | 100 kg | |
| Sintered stone top heat resistance | 1200 °C | |
| Sintered stone surface abrasion resistance | Grade 3, 6000 revolutions | |
| Lower open shelf static load | 30 kg | |
| Recommended number of users | 4 people | |
| Product warranty period | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table top | 12mm polished grey sintered stone, marble vein finish, scratch-resistant | |
|---|---|---|
| Embedded tea tray | Black food-grade melamine, recessed flush with tabletop, with drainage outlet | |
| Left support cabinet | E0 grade engineered wood, dark grey matte finish, with internal closed storage | |
| Cabinet accent panel | Black sintered stone with white marble veins, set into cabinet front | |
| Front vertical slats | 1.2mm thick matte black carbon steel bars, evenly spaced grille design | |
| Right support leg | Matte black carbon steel rectangular tube, angled for structural stability | |
| Lower open shelf | 15mm thick dark grey engineered wood, fixed between cabinet and leg | |
| Frame connectors | Zinc-plated steel cam lock screws and angle brackets, 16 pieces per unit | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Integrated tea tray drainage | Recessed tray connects to hidden plastic wastewater pipe for continuous drainage | |
|---|---|---|
| Bottom-feed kettle compatibility | Pre-drilled cable and hose channel in left cabinet for electric water boiler | |
| Closed left cabinet storage | Internal adjustable shelf stores tea canisters, kettles and cleaning supplies | |
| Open lower shelf storage | Full-width open shelf holds tea cups, tea pets and serving trays for easy access | |
| Heat-resistant work surface | Sintered stone top supports direct placement of boiling kettles without heat mats | |
| Asymmetrical load distribution | Left cabinet and right angled leg transfer load evenly to prevent tabletop warping | |
| Non-marking foot pads | Adjustable plastic foot pads on cabinet base and leg level table on uneven floors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room casual tea area | Placed in front of sofa for daily tea drinking and guest reception | |
|---|---|---|
| Office reception area | Installed in meeting lounge areas for client tea service | |
| Home tea room | Used in dedicated small tea rooms for personal or small group tea sessions | |
| Balcony leisure space | Positioned on covered balconies for relaxed afternoon tea use | |
| Matching configuration recommendation | Pair with 4 low-profile 420mm seat height tea stools for complete seating |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic tables, applicable to structural testing | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for surface resistance to mechanical damage |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to cabinet structure | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material formaldehyde emission limit for wood furniture | |
| GB/T 4897.3-2003 | Particleboard specification for furniture use, applicable to engineered wood components |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to cabinet structure; 2. GB 18584-2001: Indoor decoration material formaldehyde emission limit for wood furniture; 3. GB/T 4897.3-2003: Particleboard specification for furniture use, applicable to engineered wood components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
