Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1600 × 800 × 750 mm
Tabletop thickness	12 mm
Leg section size	50 x 50 mm square tube
Leg wall thickness	1.5 mm
Under-table knee clearance height	680 mm
Long-side seating clearance per person	600 mm
Central inset panel dimensions	400 x 600 mm
Table edge radius	10 mm
Leg outward splay angle	10 degrees
Apron height below tabletop	60 mm
Floor clearance under apron	690 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Tabletop uniform static load	100 kg
Table net weight	45 kg
Recommended number of users	4 people
Sintered stone surface heat resistance	180 °C
Surface abrasion resistance	6000 cycles
Surface water absorption rate	0.1%
Integrated induction panel power	1200 W
Frame lateral stability load	30 kg
Product warranty period	3 years
Top Static Load Reference	150 kg uniformly distributed

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop surface	12mm white marble-veined sintered stone
Tabletop backing	8mm high-density fiberboard support layer
Support frame and apron	Powder-coated carbon steel
Legs	Black powder-coated square carbon steel tube
Central inset panel	Embedded ceramic induction heating plate
Foot pads	Adjustable non-slip PP plastic feet
Hardware connectors	Zinc-plated steel bolts and cam locks
Surface finish on metal parts	Matte black electrostatic powder coating
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Integrated tea heating function	Flush-mounted 1200W induction panel at table center
Knockdown assembly structure	Detachable legs and frame connected with included hardware
Leveling adjustment	10mm height adjustment range on each foot pad
Stain-resistant surface	Non-porous sintered stone top prevents liquid absorption
Heat-resistant work surface	Supports direct placement of hot teapots and cookware up to 180°C
Fixed stable configuration	Non-extendable fixed rectangular top with 4 splayed legs
Scratch-resistant surface	Hard sintered stone surface resists cuts from tableware and cutlery
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining space	Fits small apartment dining areas for 4-person daily family meals
Home tea room	Integrated heating panel supports dedicated tea service for casual gatherings
Small commercial tea shop	Suitable for customer seating in boutique tea houses or cafes
Open-plan kitchen breakfast area	Matches modern minimalist kitchen decor as a casual dining table
Small office break room	Provides staff dining and refreshment space for small teams
Recommended configuration	Pair with 4 black-framed upholstered dining chairs for a coordinated set

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Furniture strength, durability and safety requirements for domestic dining tables
EN 15186:2007	Surface scratch resistance test method for furniture surfaces

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to table structural stability testing
GB/T 4893.4-2013	Surface wear resistance test method for furniture surfaces, applicable to tabletop finish
GB/T 4893.3-2013	Surface heat resistance test method for furniture, applicable to sintered stone tabletop
GB 6675-2014	Furniture edge safety requirements, applicable to rounded table edge design

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to table structural stability testing;
2. GB/T 4893.4-2013: Surface wear resistance test method for furniture surfaces, applicable to tabletop finish;
3. GB/T 4893.3-2013: Surface heat resistance test method for furniture, applicable to sintered stone tabletop;
4. GB 6675-2014: Furniture edge safety requirements, applicable to rounded table edge design;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · DT-ST1600-WHT-BLK

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · DT-ST1600-WHT-BLK

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · DT-ST1600-WHT-BLKOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This fixed rectangular dining and tea table balances modern minimalist aesthetics with purpose-built functionality for casual dining and tea service, designed to seat four people comfortably. Its visual profile features a crisp white marble-veined sintered stone tabletop with softly rounded edges, supported by four angled black powder-coated carbon steel legs splayed for stable, unobtrusive support. The flush-mounted central induction panel sits seamlessly integrated into the tabletop surface, eliminating visual clutter while retaining a clean, streamlined silhouette. Beneath the visible sintered stone surface, an 8mm high-density fiberboard support layer reinforces the top, connected to the matte black powder-coated carbon steel apron and leg frame via zinc-plated steel bolts and cam locks. The 50mm square carbon steel tube legs terminate in adjustable non-slip PP plastic feet, allowing minor height adjustments to level the table on uneven flooring. The non-porous sintered stone surface resists stains from spilled liquids, withstands direct contact with hot teapots and cookware, and holds up to scratches from regular tableware and cutlery use. The centrally embedded 1200W ceramic induction heating panel provides dedicated, even heating for tea service, removing the need for separate portable warming appliances that occupy table space. The table arrives as a knockdown assembly in two cartons, with all required hardware included for straightforward setup. This piece fits equally well in residential and light commercial settings: it works for small apartment dining areas, dedicated home tea rooms, open-plan kitchen breakfast nooks, boutique tea houses and cafes, and small office break rooms serving compact teams. For a cohesive look, pair the table with four black-framed upholstered dining chairs. When planning procurement, account for the two-carton packaging format, assembly time, total packaged weight, and required delivery space to ensure smooth transport and placement. Confirm that the under-table knee clearance and per-person long-side seating space align with intended use case needs before purchase.

4-Person Rectangular Sintered Stone Dining Tea Table with Built-in Induction Panel Specifications

Suppliers and stock