| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 900 x 900 x 750 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Base footprint | 580 x 580 mm | |
| Under-table knee clearance height | 680 mm | |
| Support leg section width | 80 mm | |
| Central panel dimensions | 320 x 620 mm | |
| Matched cylindrical stool seat diameter | 350 mm | |
| Matched cylindrical stool seat height | 450 mm | |
| Table edge overhang from base | 160 mm | |
| Floor clearance under base frame | 0 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Table distributed static load capacity | 150 kg | |
|---|---|---|
| Table net weight | 70 kg | |
| Tabletop direct heat resistance | 600 °C | |
| Tabletop scratch hardness (Mohs) | 6 | |
| Recommended seated user capacity | 4 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | Polished grey veined sintered stone | |
|---|---|---|
| Table edge trim | Matte dark powder-coated steel | |
| Outer slanted base supports | Matte black powder-coated carbon steel | |
| Central decorative panel | Textured grey engineered stone | |
| Internal support frame | Powder-coated square steel tubing | |
| Stool upholstery | Dark grey vertical-channeled technical fabric | |
| Stool padding | 40mm thick high-density polyurethane foam | |
| Stool internal frame | Solid eucalyptus wood frame | |
| Floor contact pads | Non-slip EVA rubber pads | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Seating access | 360-degree perimeter access | |
|---|---|---|
| Stool storage | Under-table nesting | |
| Surface use suitability | Hot tea set placement | |
| Structure type | Fixed rigid assembly | |
| Assembly requirement | Knock-down flat-pack assembly | |
| Surface maintenance | Stain-resistant non-porous top | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential balcony tea area | Compact square footprint fits small private tea spaces for casual hosting | |
|---|---|---|
| Living room casual dining nook | Dual-use design supports tea service, light meals and workspace use | |
| Small office reception area | Neutral modern styling suits staff break areas and small guest meeting spaces | |
| Compact studio apartment dining | Nesting stools reduce clutter in small open-plan living spaces | |
| Tea room guest seating | Four-person capacity supports small traditional or modern tea service events |
EU Market Access Requirements* EN Standards
| Furniture mechanical safety | EN 12521:2015 | |
|---|---|---|
| Furniture surface resistance | EN 12720:2013 | |
| Upholstered furniture durability | EN 1728:2014 |
Standards applicable to China-market projects
| Sintered stone surface standard | GB/T 44309 | |
|---|---|---|
| Furniture structural safety | GB/T 3324 | |
| Formaldehyde emission limit | GB 18584 | |
| Furniture surface coating durability | GB/T 4893.1 |
This product must meet the following technical requirements: 1. Sintered stone surface standard: GB/T 44309; 2. Furniture structural safety: GB/T 3324; 3. Formaldehyde emission limit: GB 18584; 4. Furniture surface coating durability: GB/T 4893.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
