| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 2200 x 800 x 750 mm | |
|---|---|---|
| Tabletop thickness | 80 mm | |
| Embedded black stone tea tray size | 1200 x 500 mm | |
| Decorative white inlay strip size | 1800 x 200 mm | |
| Central U-cut support panel height | 670 mm | |
| Splayed leg angle from vertical | 12 degrees | |
| Bottom stretcher clearance from floor | 120 mm | |
| Matching armchair dimensions | 580 x 500 x 750 mm | |
| Chair seat height | 450 mm | |
| Chair backrest height from seat | 350 mm | |
| Knee clearance under table edge | 670 mm | |
| Chair armrest height from seat | 220 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total set net weight | 250 kg | |
|---|---|---|
| Tabletop static load capacity | 200 kg | |
| Recommended maximum seating capacity | 5 persons | |
| Surface stain resistance rating (tea/water) | Grade 1 | |
| Structural service life | 10 years | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table main frame | Solid oak wood with walnut-toned matte lacquer | |
|---|---|---|
| Embedded tea tray insert | Polished natural black granite stone | |
| Decorative central inlay | White sintered stone strip | |
| Structural joinery | Traditional mortise and tenon joints | |
| Table surface finish | Low-VOC matte PU lacquer | |
| Chair frame and seat | Matching solid wood with continuous bentwood armrests | |
| Bottom support stretchers | Solid wood rectangular cross-section | |
| Central U-cut support panel | Thick solid wood vertical panel | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Integrated wet tea brewing station | Embedded stone tray with pre-cut drain channel | |
|---|---|---|
| Under-table appliance compatibility | 150 mm clearance for hidden induction boiler or water pump | |
| 360-degree seating access | Open support design with no obstructing side cabinets | |
| Mortise and tenon structural locking | Glued, fastener-free joinery for long-term stability | |
| Scratch-resistant table surface | Hardened lacquer finish resists abrasion from teaware | |
| Non-slip felt foot pads | Fitted to all table and chair leg bases | |
| Modular set configuration | Detachable chair units for flexible seating arrangement | |
| Hidden cable routing channel | Routed along central support for electric boiler cords | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Private home tea room | Suitable for dedicated home tea spaces for family and guest use | |
|---|---|---|
| Office reception area | Fits executive reception lounges for client entertainment | |
| Hotel/club lounge space | Appropriate for boutique hotels, tea houses and private clubs | |
| Open concept living/dining area | Works as multi-use surface for tea, casual dining and display | |
| Recommended accessory pairing | Matches with matching side tea cabinet, display shelf and floor rug |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - strength, durability and safety for domestic tables | |
|---|---|---|
| EN 1022:2018 | Domestic furniture - seating - determination of stability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture | |
|---|---|---|
| GB 18584-2001 | Indoor decorating materials - limit of harmful substances in wooden furniture | |
| GB/T 4893.9-2013 | Test for surface durability against dry/wet heat |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture; 2. GB 18584-2001: Indoor decorating materials - limit of harmful substances in wooden furniture; 3. GB/T 4893.9-2013: Test for surface durability against dry/wet heat; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
