Product supplierModern Sintered Stone Gongfu Tea Table with Integrated Recessed Tea Tray, Polished dark grey sintered stone, rounded edge finish
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1600 × 800 × 750 mm | |
|---|---|---|
| Sintered stone tabletop thickness | 12 mm | |
| Embedded recessed tea tray dimensions | 800 x 400 x 40 mm | |
| Central seated knee clearance width | 800 mm | |
| Seated knee clearance height | 650 mm | |
| Pedestal base panel thickness | 20 mm | |
| Metal frame wall thickness | 1.5 mm | |
| Tabletop rounded edge radius | 20 mm | |
| Pedestal base footprint width per side | 300 mm | |
| Cross support bar height from floor | 120 mm | |
| Tabletop overhang beyond pedestal | 50 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Tabletop static load capacity | 150 kg | |
|---|---|---|
| Net product weight | 130 kg | |
| Recommended seating capacity | 6 people | |
| Tea tray drain system flow rate | 1.5 L/min | |
| Sintered stone surface heat resistance | 1200 °C | |
| Surface scratch resistance rating | 6 Mohs | |
| Recommended warranty period | 5 years | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop slab | Polished dark grey sintered stone, rounded edge finish | |
|---|---|---|
| Structural frame | Powder-coated dark gunmetal steel tubing, 1.5mm wall thickness | |
| Pedestal outer panels | Grey marble-look sintered stone veneer, polished finish | |
| Pedestal inner panels | Matte dark grey MDF core with laminate finish | |
| Lower cross supports | Powder-coated square steel tubing, welded connections | |
| Embedded tea tray base | Matte black food-grade 304 stainless steel, drain outlet | |
| Foot pads | Non-slip 5mm thick rubber pads under each base corner | |
| Structural adhesive | Stone-grade epoxy adhesive for slab to frame bonding | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Integrated tea service area | Recessed rectangular cutout accepts standard gongfu tea trays and electric kettles | |
|---|---|---|
| Drainage system | Hidden gravity drain outlet connects to removable under-table waste water bucket | |
| Seating access | Open central knee bay allows seated use from both long sides of the table | |
| Surface performance | Non-porous sintered stone top resists tea stains, heat from boiling kettles, and surface scratches | |
| Stability design | Dual wide pedestal base with lower cross bracing eliminates wobble during tea preparation | |
| Floor protection | Rubber foot pads prevent scratches to hard flooring and allow level adjustment | |
| Configuration compatibility | Accepts matching long benches or individual tea chairs for multi-person seating | |
| Edge safety | Rounded tabletop edges eliminate sharp impact points for users around the table perimeter | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Home reception area | Serves as dedicated tea service station for hosting guests in living rooms | |
|---|---|---|
| Office meeting space | Supports small business tea reception meetings in executive lounges | |
| Tea house private room | Functions as primary brewing table for commercial gongfu tea service | |
| Balcony leisure space | Fits mid-sized balconies for casual daily tea drinking at home | |
| Hotel VIP lounge | Matches modern luxury interior design for guest welcome refreshment service | |
| Studio reception area | Provides a refined refreshment zone for creative studio or workshop visitor hosting |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability and safety requirements for domestic dining/utility tables | |
|---|---|---|
| EN 14749:2016 | Safety requirements for domestic and kitchen storage units and worktops |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to base panel components | |
|---|---|---|
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable to MDF core structural panels | |
| GB 6566-2010 | Limit of radionuclides in building materials, applicable to sintered stone slabs | |
| GB/T 17657-2013 | Test methods for evaluating surface properties of furniture panels |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to base panel components; 2. GB/T 4897.3-2003: Particleboard for furniture use, applicable to MDF core structural panels; 3. GB 6566-2010: Limit of radionuclides in building materials, applicable to sintered stone slabs; 4. GB/T 17657-2013: Test methods for evaluating surface properties of furniture panels; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool