Product supplierNew Chinese Style Two-Tone Solid Wood Tea Dining Meeting Table with Integrated End Open Storage, Walnut grain solid wood, open-pore matte lacquer finish
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2400 × 900 × 750 mm | |
|---|---|---|
| Tabletop thickness | 80 mm | |
| Left integrated storage pedestal height | 600 mm | |
| Attached side storage cabinet dimensions | 800 x 450 x 600 mm | |
| Tabletop edge overhang | 50 mm | |
| Under-table knee clearance height | 670 mm | |
| Open storage shelf compartment height | 280 mm | |
| Pedestal wall thickness | 50 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended seating capacity | 6 persons | |
|---|---|---|
| Distributed static tabletop load capacity | 250 kg | |
| Wood moisture content | 10% | |
| Table net weight | 150 kg | |
| Finish scratch resistance rating | 2000 cycles | |
| Floor protection pad diameter | 50 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Main tabletop | Walnut grain solid wood, open-pore matte lacquer finish | |
|---|---|---|
| Right support pedestal | Matte black solid wood block construction, sealed edge finish | |
| Left storage pedestal | Matte light beige/white solid wood block with integrated open shelves | |
| Attached side cabinet top surface | White matte engineered stone/sintered stone surface | |
| Shelf interior surfaces | Matte wood veneer matching interior pedestal finish | |
| Pedestal base pads | Non-slip rubber anti-scuff floor protectors | |
| Assembly hardware | Zinc-plated steel connector bolts and cam locks | |
| Matching chair frames | Solid dark wood frame with curved armrests | |
| Matching chair upholstery | 25mm thick high-resilience foam, off-white linen-look fabric | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Integrated open tea storage | Two open compartments in left pedestal for teapot, teacup and tea canister storage | |
|---|---|---|
| Two-tone block pedestal support | Dual full-width block pedestals eliminate central leg obstruction for leg room | |
| Attached side preparation surface | White lower-height side counter adjacent to table for tea preparation accessory placement | |
| Dry-bubble tea service layout | Long rectangular central runner area designed for tea tray and tea set placement | |
| Knock-down assembly design | Tabletop and pedestals ship flat for transport, assembled via bolted connections | |
| Anti-tip stability design | Wide block pedestal bases lower center of gravity to prevent tipping during use | |
| Multi-use surface suitability | Supports tea reception, casual dining, and small team meeting use | |
| Right black block pedestal dimensions | 600 x 900 x 720 mm | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office reception tea room | Suitable for executive office reception areas for hosting clients over tea service | |
|---|---|---|
| Private club lounge space | Fits new Chinese style club lounge layouts for multi-person social tea gatherings | |
| Open-plan studio meeting area | Functions as small team meeting table for casual discussions and refreshments | |
| Residential dining/tea room | Works as premium dining table in home tea rooms for family and guest use | |
| Recommended configuration | Pair with 1 host armchair and 5 guest armchairs for full 6-person seating set |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety requirements for domestic tables | |
|---|---|---|
| EN 13722:2004 | Furniture – Test methods for the strength and durability of table surfaces |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood table structure and finish | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials – limit of harmful substances for wooden furniture | |
| GB/T 4897.3-2003 | Particleboard – Part 3: Requirements for furniture use, applicable if composite panels are used |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood table structure and finish; 2. GB 18584-2001: Indoor decorating and refurbishing materials – limit of harmful substances for wooden furniture; 3. GB/T 4897.3-2003: Particleboard – Part 3: Requirements for furniture use, applicable if composite panels are used; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool