Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1800 × 800 × 750 mm
Overall table dimensions	1800 x 800 x 750 mm
Tabletop total thickness	80 mm
Inset light tabletop panel thickness	12 mm
Recessed tea tray placement area	800 x 300 mm
Seated knee clearance height under table	630 mm
Leg cross-section dimension	60 x 60 mm
Left-end lower storage compartment size	400 x 700 x 400 mm
Armchair seat height	450 mm
Table edge overhang from leg frame	50 mm
Floor clearance under table apron	600 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Single table net weight	85 kg
Tabletop distributed static load capacity	150 kg
Wood frame moisture content	13%
Stone/ceramic top heat resistance	180 °C
Recommended seating capacity	4 people
Surface coating abrasion resistance	2000 cycles
Structural warranty period	3 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Table frame and legs	Hard solid wood with walnut-toned water-based lacquer
Main tabletop inset panel	Light-colored matte sintered stone/ceramic panel
Recessed tea tray base	Solid wood support frame with flush fit
Table apron and stretchers	Solid wood with mortise and tenon joinery
Left storage compartment panels	Solid wood frame with matching wood finish
Matching armchair frames	Solid wood with rounded edge detailing
Armchair seat panels	Solid wood slat/flat panel construction
Connecting hardware	Zinc-plated steel bolts and wood dowels
Wood finish	Low-VOC water-based clear lacquer
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Recessed tea tray integration	Flush recessed area accommodates standard sized tea trays
Left-side open storage	Open lower compartment stores tea canisters, tools and wastewater buckets
Knock-down assembly structure	Flat-pack design with bolted leg and frame connections
Reserved cable routing opening	Pre-drilled opening near tea tray for electric kettle power cord
Dual-side seating access	Clear open knee space along both long table edges
Rounded edge treatment	All tabletop and chair edges rounded to 3mm radius
Leveling foot pads	Adjustable non-slip pads on each leg base
Stain-resistant tabletop surface	Non-porous sintered stone top resists tea stain penetration
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Office reception area	Formal 4-person tea service space for clientReceptionand business discussions
Home tea room	Dedicated tea ceremony space for family and friend gatherings
Clubhouse lounge	Seating for casual conversation and tea service in private club areas
Balcony leisure space	Compact 4-seat configuration fits large covered balconies for relaxed tea breaks
Hotel executive floor lounge	Premium seating for VIP guest refreshment and informal meetings
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

No standards data is available for this market.

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB 18584-2001	Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture
GB/T 3324-2017	General technical requirements for wooden furniture
GB 18581-2020	Limit of harmful substances of solvent based wood coatings
GB/T 4897.3-2003	Particleboard - Part 3: Requirements for furniture use

Standardized tender description text

This product must meet the following technical requirements:
1. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture;
2. GB/T 3324-2017: General technical requirements for wooden furniture;
3. GB 18581-2020: Limit of harmful substances of solvent based wood coatings;
4. GB/T 4897.3-2003: Particleboard - Part 3: Requirements for furniture use;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CT-NC4-1800-WF

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CT-NC4-1800-WF

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CT-NC4-1800-WFOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This New Chinese Style 4-Seat Solid Wood Tea Ceremony Table and matching armchairs form a coordinated set built for dedicated tea service, balancing traditional aesthetic cues with practical modern usability. The table features a rectangular silhouette anchored by straight, solid wood legs, with a dual-material tabletop that pairs a light-hued matte sintered stone or ceramic inset panel with surrounding solid wood framing finished in a warm walnut-toned low-VOC water-based lacquer. A flush recessed zone sits integrated into the tabletop to hold standard tea trays, while an open lower storage compartment occupies the left end of the table base, positioned to hold tea canisters, preparation tools, and wastewater buckets without cluttering the service surface. Four matching solid wood armchairs, finished with rounded edge detailing and solid wood slat or flat panel seats, sit along the table’s two long edges, with clear open knee space allowing easy access from both sides. All exposed edges on the table and chairs are rounded to a smooth profile, and adjustable non-slip leveling pads on each leg base keep the set stable on uneven flooring.
The table’s structure relies on mortise and tenon joinery for its apron and stretchers, secured with zinc-plated steel bolts and wood dowels in a knock-down flat-pack design that simplifies transport and assembly. A pre-drilled cable routing opening near the recessed tea tray area accommodates power cords for electric kettles, eliminating cord clutter across the service surface. The solid wood frame is finished to a consistent moisture content suitable for long-term indoor use, while the inset stone or ceramic tabletop offers heat resistance suitable for hot tea service ware.
This set fits a range of both residential and commercial spaces: it works as a formal client reception station in office areas, a dedicated gathering spot in home tea rooms, a casual seating option in private clubhouse lounges, a leisure setup for large covered balconies, or a premium refreshment zone in hotel executive floor lounges. For procurement, note that the set ships in two cartons with a straightforward assembly process, comes with a 3-year structural warranty, and supports a recommended seating capacity of four people. The complementary design pairs seamlessly with 2.4 m executive desks for coordinated reception area layouts.

New Chinese Style 4-Seat Solid Wood Tea Ceremony Table with Inset Light Top and Matching Armchairs Specifications

Suppliers and stock