| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 2400 x 800 x 750 mm | |
|---|---|---|
| tabletop thickness | 50 mm | |
| pedestal diameter | 350 mm | |
| pedestal height | 710 mm | |
| knee clearance height | 680 mm | |
| integrated tea tray dimensions | 1200 x 400 mm | |
| edge trim thickness | 2 mm | |
| clear floor space per seat | 600 mm | |
| distance between two pedestals | 1400 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| tabletop static distributed load | 260 kg | |
|---|---|---|
| tabletop heat resistance | 1200 °C | |
| tabletop Mohs hardness | 7 | |
| seating capacity | 6 persons | |
| tabletop water absorption rate | 0.1% | |
| pedestal base static load capacity | 300 kg | |
| surface wear resistance (abrasion cycles) | 20000 cycles | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop surface | High-gloss polished sintered stone, scratch and stain resistant | |
|---|---|---|
| table edge trim | Dark polished stainless steel, 2mm thick, wrapped around table perimeter | |
| pedestal supports | Thickened dark polished stainless steel cylindrical columns, welded internal reinforcement | |
| integrated tea tray | Dark matte sintered stone, recessed flush with tabletop surface | |
| tabletop core backing | High-density MDF reinforcing panel, 38mm thick, bonded to stone slab | |
| base connection hardware | Grade 8.8 carbon steel mounting bolts, M10 size, 8 bolts per pedestal | |
| pedestal base bottom pads | Non-slip rubber floor protectors, 5mm thick, 6 per base | |
| surface finish coating | Nanoscale anti-fingerprint clear coat, 0.05mm thick, applied to polished stone | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| integrated tea service surface | Recessed flush-mounted stone tea tray positioned centrally for shared tea preparation | |
|---|---|---|
| fixed height dining configuration | 750mm standard dining height, compatible with 450 mm seat height dining/tea chairs | |
| 360-degree accessible seating | Open perimeter without cross supports, allowing seating on all four table sides | |
| heat-resistant service surface | Sintered stone top supports direct placement of hot teapots and boiling water vessels without surface damage | |
| stain-resistant easy-clean surface | Non-porous polished surface allows wipe-clean of tea and food spills without seepage | |
| knock-down assembly design | Tabletop and two pedestals ship separated for transport, secured via bolted connections during setup | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| office reception lounge | Fits executive reception areas for hosting guest tea service and informal meetings | |
|---|---|---|
| luxury residential dining space | Serves as combined dining and tea service table in open-plan living or dining areas | |
| private tea room | Functions as dedicated tea ceremony table with integrated service surface for tea preparation | |
| high-end club lounge | Suits VIP club lounge areas for member tea service and light dining | |
| commercial hospitality space | Works in boutique hotel lounge areas for guest reception and refreshment service |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 15372:2008 | Furniture – Durability requirements for non-domestic dining/tea tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to backing panel structure | |
|---|---|---|
| GB/T 4893.9-2013 | Surface heat resistance test method for furniture finishes, applicable to tabletop | |
| GB 28007-2011 | Furniture mechanical performance test for tables, applicable to structural stability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to backing panel structure; 2. GB/T 4893.9-2013: Surface heat resistance test method for furniture finishes, applicable to tabletop; 3. GB 28007-2011: Furniture mechanical performance test for tables, applicable to structural stability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
