| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 700 x 450 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Frame tube thickness | 1.2 mm | |
| Lower shelf depth | 600 mm | |
| Left closed panel height | 400 mm | |
| Right vertical slat spacing | 60 mm | |
| Floor clearance under lower shelf | 50 mm | |
| Left closed panel width | 400 mm | |
| Right slatted section width | 450 mm | |
| Middle lower shelf width | 450 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 145 kg | |
|---|---|---|
| Tabletop surface temperature resistance | 180 °C | |
| Product net weight | 55 kg | |
| Recommended user capacity | 4 people | |
| Frame anti-rust coating durability | 500 hours salt spray resistance | |
| Sintered stone surface abrasion resistance | 6000 revolutions | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | 12mm light grey sintered stone with polished matte finish | |
|---|---|---|
| Main frame | 1.2mm thick carbon steel with matte black powder coating | |
| Lower storage shelf | 8mm thick black tempered glass with frosted back finish | |
| Left side panel | 15mm thick black matte particle board panel | |
| Right vertical slats | 1.0mm thick black powder-coated carbon steel bars | |
| Frame foot pads | 5mm thick non-slip PVC pads | |
| Assembly hardware | Zinc-plated steel screws and connection brackets | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Storage configuration | Left closed hidden compartment, middle open lower shelf, right slatted open storage | |
|---|---|---|
| Tea service placement | Flat seamless tabletop accommodates standard 800mm long gongfu tea trays | |
| Floor protection | Non-slip PVC foot pads prevent floor scratches and stabilize placement | |
| Flat-pack assembly | Knock-down construction with included hardware for on-site assembly | |
| Surface maintenance | Non-porous sintered stone top resists tea stains and requires only wiping for cleaning | |
| Ventilated storage | Right vertical slat section provides air circulation for stored tea accessories | |
| Hidden storage | Left closed panel conceals small tea tools and supplies out of sight | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room center placement | Positioned in front of sofas for daily gongfu tea service and casual snack use | |
|---|---|---|
| Small apartment tea space | Compact 1300mm length fits 30sqm small living rooms without occupying excess space | |
| Modern minimalist interiors | Black frame and grey stone top coordinates with light grey, monochrome or industrial interior styles | |
| Home tea room setup | Sized for 4 guests to gather for casual tea tasting sessions | |
| Office reception area use | Suitable for placing in reception lounges to serve guests beverages |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability and safety requirements for domestic living room tables | |
|---|---|---|
| EN 13722:2004 | Furniture - Assessment of surface resistance to cold liquids for table tops | |
| EN 1022:2018 | Domestic furniture - Seating and tables - Determination of stability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for left panel assembly quality | |
|---|---|---|
| GB/T 3325-2017 | General technical requirements for metal furniture, applicable for frame welding and coating quality | |
| GB 6566-2010 | Limits of radionuclides in building materials, applicable for sintered stone top radiation safety | |
| GB/T 4897.3-2017 | Particle board requirements for furniture use, applicable for left side panel material |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for left panel assembly quality; 2. GB/T 3325-2017: General technical requirements for metal furniture, applicable for frame welding and coating quality; 3. GB 6566-2010: Limits of radionuclides in building materials, applicable for sintered stone top radiation safety; 4. GB/T 4897.3-2017: Particle board requirements for furniture use, applicable for left side panel material; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
