| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (table + 4 placed chairs) | 2200 x 1600 x 760 mm | |
|---|---|---|
| Tabletop thickness | 15 mm | |
| Embedded tea service panel dimensions | 400 x 600 mm | |
| Embedded electric heating zone dimensions | 300 x 300 mm | |
| Under-table knee clearance height | 710 mm | |
| Seat height of matching dining chairs | 450 mm | |
| Chair overall dimensions | 520 x 500 x 750 mm | |
| Seat cushion width for each chair | 480 mm | |
| Seat cushion depth for each chair | 460 mm | |
| Chair backrest height from seat | 300 mm | |
| Frame leg angle from vertical | 15 degrees | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight (table + 4 chairs) | 90 kg | |
|---|---|---|
| Tabletop static load capacity | 150 kg | |
| Recommended maximum user weight per chair | 120 kg | |
| Tabletop surface heat resistance | 1200 °C | |
| Tabletop Mohs scratch hardness | 6 | |
| Tea drainage panel waste water capacity | 2 L | |
| Seating capacity | 4 people | |
| Table surface stain/water absorption rate | 0.02 % | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface panel | 15mm white marble-vein sintered stone, polished matte finish, rounded corners | |
|---|---|---|
| Table support frame and legs | 1.2mm thick carbon steel with black powder-coated finish, anti-rust treated | |
| Embedded tea drainage panel | Matching sintered stone slotted grate, marked with tea character, recessed installation | |
| Embedded heating cutout base | High-temperature resistant phenolic resin liner, electrical wiring pre-routed | |
| Chair frame and legs | 20mm diameter black powder-coated carbon steel tubing, welded curved back rail | |
| Chair seat upholstery | 0.8mm thick matte black faux leather, stitched edge binding | |
| Chair seat padding | 40mm thick high-density polyurethane foam, 40kg/m³ density, 45% rebound rate | |
| Floor contact pads | 5mm thick non-slip rubber pads on all leg bases | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Integrated wet tea brewing function | Recessed drainage grate routes waste tea to concealed under-table reservoir | |
|---|---|---|
| Built-in appliance heating position | Dedicated embedded cutout supports electric tea kettle boiling for kung fu tea service | |
| Fixed rigid table assembly | KD bolt-connected frame and top, non-extendable, non-tilting fixed work surface | |
| Surface maintenance function | Non-porous sintered stone top allows direct wipe cleaning, no sealing required | |
| Chair seating support | Curved backrest provides upper back support for upright tea/dining seating | |
| Frame stability function | Angled outward legs and central horizontal slatted underframe eliminate lateral wobble | |
| Waste water collection | Detachable under-table waste water bucket for easy emptying after tea service | |
| Anti-slip floor protection | Rubber foot pads prevent movement and protect hard flooring surfaces | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Small apartment dining space | Compact 1.6m length fits 4-seat dining without occupying excess floor area | |
|---|---|---|
| Office reception/tea room | Integrated tea brewing supports guest reception kung fu tea service | |
| Home living room/balcony leisure area | Multi-functional design serves both daily dining and casual tea gathering | |
| Small tea house booth seating | Matching 4-chair set provides standardized customer seating for tea service | |
| Open-plan studio space | Dual dining/tea function eliminates need for separate tea table and dining table | |
| Residential breakfast nook | 76cm standard dining height supports comfortable daily meal use |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 1022:2018 | Domestic seating – Determination of stability for chairs and stools | |
| EN 13722:2004 | Furniture – Test methods for surface resistance to dry heat |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural safety verification | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard for furniture use, applicable if hidden structural panels are included | |
| GB 18584-2001 | Formaldehyde emission limit for indoor wooden furniture, applicable for E1 grade verification | |
| GB/T 15102-2017 | Performance requirements for decorative laminated surfaces, applicable for sintered stone top verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety verification; 2. GB/T 4897.3-2015: Particleboard for furniture use, applicable if hidden structural panels are included; 3. GB 18584-2001: Formaldehyde emission limit for indoor wooden furniture, applicable for E1 grade verification; 4. GB/T 15102-2017: Performance requirements for decorative laminated surfaces, applicable for sintered stone top verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
