Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	2400 × 800 × 750 mm
Sintered stone tabletop section dimensions	1600 x 800 mm
Recessed tea tray zone dimensions	800 x 400 mm
Tabletop total thickness	61 mm
Moon-gate circular leg cutout diameter	180 mm
Panel leg cross-section dimensions	400 x 750 mm
Under-table knee clearance height	680 mm
Table corner radius	50 mm
Long side seating clear width per position	480 mm
Short side seating clear width	800 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Tabletop static uniform load capacity	200 kg
Sintered stone surface heat resistance	1200 °C
Sintered stone surface scratch resistance (Mohs scale)	6
Standard seating capacity	5 people
Product net weight	120 kg
Integrated tea boiler heating power	1200 W
Tea tray wastewater capacity	2 L
Integrated boiler auto water feed stroke	1200 mm
Surface finish wear resistance (wood frame)	4000 cycles
Reference Static Load	150 kg depending on category

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Main support frame	Solid oak with natural matte finish, 36mm thick support panels
Tabletop primary inset	25mm thick matte sintered stone, light grey marble pattern
Recessed tea tray	12mm thick black polished natural slate, flush inset to tabletop
Integrated boiler housing	Food-grade 304 stainless steel heating element, heat-resistant plastic base
Table edge banding	Solid wood matching frame, 50mm wide rounded edge profile
Leg panel inner support	18mm thick multi-layer solid wood plywood internal bracing
Surface finish (wood components)	Environmentally friendly water-based polyurethane matte lacquer
Non-slip foot pads	8mm thick silicone rubber pads at each leg base
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Integrated electric tea boiler system	Auto water feed, 100°C boiling, constant temperatureKeep warmat 95°C
Hidden wastewater drainage system	Gravity drain from tea tray to removable 2L bucket under table
Fixed solid panel leg support	Two end panels with decorative moon-gate cutouts, no moving parts
Integrated cable management	Hidden channel inside right leg for boiler power cord
Heat-resistant tabletop surface	Sintered stone section withstands direct hot teapot placement without coasters
Raised table edge lip	5mm high lip around tea tray zone
Under-table bucket storage clearance	300mm high open space between legs for standard 18.9L water bucket
Easy-clean surface design	Non-porous sintered stone and smooth wood finish wipe clean with damp cloth
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Private residential tea room	Fits dedicated tea ceremony spaces for daily home tea service and guest entertainment
Office reception area	Suitable for executive reception spaces for hosting clients during business meetings
Commercial tea house private booth	Meets durability requirements for light commercial tea venue daily use
Open-plan living room tea zone	Works as dedicated tea preparation and seating area in modern open living spaces
Clubhouse lounge common area	Appropriate for community or club lounge use for member gatherings
Target user group	Tea ceremony enthusiasts, business reception users, household tea service users
Recommended configuration	Pair with 1 host armchair and 4 guest side chairs, plus optional tea utensil storage cabinet

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 13722:2004	Furniture – Tables – Test methods for strength, durability and stability
EN 12524:2000	Sintered stone furniture surfaces, performance requirements for scratch and heat resistance
EN 71-3:2019	Safety of furniture finishes, migration of certain elements for indoor use
EN 60335-2-15:2019	Safety of electric heating appliances for liquid heating, applies to tea boiler

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to solid wood frame construction
GB 18584-2001	Indoor decoration material limit of harmful substances for wooden furniture, applies to formaldehyde emission
GB/T 4897.3-2015	Particleboard for furniture use, applicable if engineered wood bracing is used
GB 4706.1-2005	Safety of household electrical appliances, applies to integrated electric tea boiler

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood frame construction;
2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture, applies to formaldehyde emission;
3. GB/T 4897.3-2015: Particleboard for furniture use, applicable if engineered wood bracing is used;
4. GB 4706.1-2005: Safety of household electrical appliances, applies to integrated electric tea boiler;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · TT-MC-MG2408-5S

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · TT-MC-MG2408-5S

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · TT-MC-MG2408-5SOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This modern Chinese-style solid wood integrated tea ceremony table, model TT-MC-MG2408S, blends heritage-inspired design with functional integration for streamlined tea service. Its linear form features a balanced layout pairing a large light grey marble-pattern matte sintered stone work surface with a flush recessed tea preparation zone, anchored by two solid end panels adorned with decorative moon-gate circular cutouts for a signature cultural motif. Rounded 50mm table corners, wide solid wood edge banding, and smooth matte wood finishes create a polished, approachable visual profile, while integrated cable routing through the right leg keeps power cords out of sight to preserve clean sightlines.
Constructed for long-term use, the table’s core frame is built from 36mm thick solid oak finished with environmentally friendly water-based polyurethane matte lacquer, reinforced by 18mm multi-layer solid wood plywood internal bracing within each leg panel. The 61mm thick tabletop incorporates a 25mm thick matte sintered stone inset with a Mohs scratch resistance rating of 6 and heat resistance up to 1200°C, alongside a 12mm thick polished black natural slate tea tray set flush to the surface. The integrated tea station uses a food-grade 304 stainless steel heating element paired with a heat-resistant plastic base, while 8mm silicone rubber non-slip foot pads protect flooring and stabilize the unit. Each major structural joint uses M6-M10 connectors with a minimum of two fixing points for rigid, durable assembly.
Functional design elements eliminate the need for separate tea service furniture. The integrated 1200W electric boiler supports automatic water feed, 100°C boiling, and 95°C constant temperature keep-warm function, while a hidden gravity drainage system routes tea tray wastewater to a removable 2L bucket stored in the 300mm high under-table open space, which also accommodates standard 18.9L water supply buckets. A 5mm raised lip around the tea tray zone contains accidental spills, the heat-resistant sintered stone surface supports direct placement of hot teapots without coasters, and 680mm of under-table knee clearance delivers comfortable seating for 5 people. The sintered stone section supports a 200kg static uniform load for stable use.
This table is suited for private residential tea rooms, open-plan living room tea zones, executive office reception areas, light commercial tea house private booths, and clubhouse lounge common areas, serving tea ceremony enthusiasts, household users, and business reception operators. Procurement teams should note each unit ships in 2 cartons with a 0.8m³ packaged volume and 120kg gross weight, requiring 40 minutes of assembly per set, and confirm space compatibility with the table’s 2400 x 800 x 750 mm footprint prior to ordering.

Modern Chinese Solid Wood Integrated Tea Ceremony Table with Sintered Stone Top Specifications

Suppliers and stock