Product supplierAsymmetrical Grey Sintered Stone Tea Ceremony Table with Built-in Rotating Lazy Susan, 30mm grey sintered stone, polished nano anti-fouling finish
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2000 × 900 × 500 mm | |
|---|---|---|
| Recessed lazy Susan diameter | 800 mm | |
| Sintered stone tabletop thickness | 30 mm | |
| Fluted cylindrical pedestal diameter | 600 mm | |
| Cantilever metal leg frame width | 900 mm | |
| Clearance under tabletop | 420 mm | |
| Tea service mat area | 800 x 400 mm | |
| Pedestal vertical rib pitch | 20 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Tabletop static load capacity | 150 kg | |
|---|---|---|
| Surface scratch resistance (Mohs hardness) | 7 | |
| High temperature resistance | 1200 °C | |
| Seating capacity | 6 persons | |
| Net product weight | 120 kg | |
| Structural warranty | 5 years | |
| Lazy Susan rotation cycle life | 30000 cycles | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop substrate | 30mm grey sintered stone, polished nano anti-fouling finish | |
|---|---|---|
| Rotating tray top | Black sintered stone, recessed flush fit with main tabletop | |
| Left support pedestal | Painted carbon steel, vertical fluted ribbed texture | |
| Right leg frame | Matte grey painted carbon steel, open geometric cantilever structure | |
| Lazy Susan bearing | Aluminum core with steel ball bearings, 360° rotation | |
| Joinery hardware | Stainless steel reinforcement brackets, anti-rust coated | |
| Surface protective coating | Nano anti-penetration sealant, stain resistant | |
| Foot pads | Non-slip rubber floor protectors, adjustable height | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Integrated lazy Susan | 360° smooth rotation via steel ball bearings, flush recessed mounting | |
|---|---|---|
| Low-profile seating alignment | 500mm table height optimized for 350mm seat height leisure tea chairs | |
| Spill-resistant tabletop | Non-porous sintered stone surface allows wet cloth cleaning without seepage | |
| Mixed support structure | Combines cylindrical pedestal and open cantilever leg for knee clearance on three sides | |
| Heat-resistant work surface | Supports direct placement of boiling kettles and hot teapots without damage | |
| Optional tea tray integration | Recessed lazy Susan can be fitted with drainage tea tray for wet tea service | |
| Modular assembly | Knock-down construction with separate tabletop, pedestal and leg components | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office reception tea area | Fits executive lounge spaces for formal guest tea reception | |
|---|---|---|
| Residential living room tea corner | Serves as dedicated tea ceremony station for home hospitality | |
| Tea house private booth | Suitable for premium commercial tea house private seating rooms | |
| Clubhouse lounge space | Works in private club or membership lounge relaxation zones | |
| Recommended chair pairing | Low-profile barrel-shaped leisure tea chairs with 350mm seat height | |
| Surface care recommendation | Wipe clean with damp cloth, avoid abrasive scouring pads |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 15372:2016 | Furniture for non-domestic use - safety, strength and durability requirements for tables | |
|---|---|---|
| EN 12521:2015 | Furniture - strength, durability and safety for domestic tables |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Desk products - performance test standard for horizontal surface stability and load |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 39126-2020 | Sintered stone for furniture, applicable to tabletop material performance and dimensional tolerance | |
|---|---|---|
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable to frame strength and stability | |
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture, applicable to coating VOC limits |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 39126-2020: Sintered stone for furniture, applicable to tabletop material performance and dimensional tolerance; 2. GB/T 3324-2017: General technical requirements for metal furniture, applicable to frame strength and stability; 3. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture, applicable to coating VOC limits; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool