Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1600 × 600 × 1100 mm
Main work surface height	750 mm
Raised front privacy panel height	350 mm
Side return work surface length	1200 mm
Knee clearance width under main work surface	800 mm
Knee clearance height under work surface	690 mm
Work surface thickness	25 mm
Open storage compartment internal dimensions	400 x 350 x 150 mm
Front kickplate height	100 mm
Decorative grid inlay line width	8 mm
Cable grommet diameter	60 mm
Finished Top Thickness	50 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Work surface static load capacity	100 kg
Drawer slide cycle rating	50000 cycles
Hinge cycle rating for storage doors	80000 cycles
Product net weight	55 kg
Laminate surface abrasion resistance	2000 cycles
Recommended maximum seated user weight	120 kg
Number of supported users	1
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Core panel construction	E1-grade high-density particleboard
Work surface finish	High-gloss scratch-resistant white laminate
Front privacy fascia	Gloss white laminated MDF panel with thin black grid inlay
Base kickplate trim	Matte black rigid PVC or powder-coated metal strip
Drawer slides	Cold-rolled steel ball-bearing full-extension slides
Lock core and handle	Zinc alloy keyed cam lock with matte black finish
Fastening hardware	Zinc-plated steel cam lock screws and confirmat screws
Edge banding	2 mm thick matching white PVC edge banding
Cable management grommet	ABS plastic black cable pass-through grommet
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Raised front privacy panel	Blocks visitor line of sight to work surface items at 1100 mm total front height
Lockable drawer storage	Key-locked drawer secures valuables and paperwork on attendant side
Open adjacent storage bay	Provides open access for frequently used office supplies next to locked drawer
Integrated cable management	Grommet pass-through routes power and data cables from work surface to floor
L-shaped corner layout	Extends side return to create additional work and storage space for attendant
Recessed knee opening	Provides unobstructed seated legroom under main work surface
Scratch-resistant work surface	Wipe-clean high-gloss finish resists daily wear and stains from office use
Flat-pack assembly design	Knock-down construction enables lower shipping cost and on-site assembly
Lockable drawer internal dimensions	400 x 350 x 140 mm
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	Main top 2500× 1050× 350 mm; return/pedestal packed separately
Reference Packaged Gross Weight	180 kg/set in 4 cartons
Reference Packaging Volume	1 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Small office lobby	Fits compact front-of-house space with single-staff reception coverage
Beauty salon reception	Provides concealed workspace and storage for client check-in and scheduling
Retail checkout counter	Serves as compact point-of-service counter for small boutique or studio
Clinic front desk	Supports patient check-in and paperwork with hidden work surface storage
Open coworking entry	Creates defined welcome point with clear visitor-staff visual separation
Reception staff configuration	Designed for single seated attendant with side return work surface space
Recommended adjacent furniture	Pairs with low-profile guest seating and under-desk CPU holder for full setup

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 527-1:2011	Office worktables safety and strength requirements, applicable for desk stability
EN 527-2:2016	Office worktables dimensional requirements, applicable for seated work clearance
EN 14749:2016	Domestic and kitchen storage units safety requirements, applicable for drawer safety
EN 12521:2015	Furniture strength, durability and safety for non-domestic seating-adjacent tables

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.5-2021	Desk products standard for strength, durability and structural integrity
ANSI/BIFMA X5.9-2019	Storage units standard for drawer cycle and load performance
ANSI/BIFMA G1-2013	Ergonomic guideline for office work surface height and clearance dimensions

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for panel strength and finish quality
GB/T 3327-2018	Dimensions and tolerances for office desks, applicable for work surface height and clearance
GB 18580-2017	Formaldehyde emission limits for wood-based panels, applicable for core board E1 compliance
GB/T 4897.3-2015	Requirements for particleboard used in furniture, applicable for core panel material

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for panel strength and finish quality;
2. GB/T 3327-2018: Dimensions and tolerances for office desks, applicable for work surface height and clearance;
3. GB 18580-2017: Formaldehyde emission limits for wood-based panels, applicable for core board E1 compliance;
4. GB/T 4897.3-2015: Requirements for particleboard used in furniture, applicable for core panel material;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · RC-L2T-WB-1600

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · RC-L2T-WB-1600

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · RC-L2T-WB-1600Open Export Tool

Quick Actions

Post an RFQ

Product Description

The RC-L2T-WB-1600 unbranded reception desk features a modern, minimalist L-shaped corner structure designed to balance welcoming presentation and functional staff workspace. Its two-tier form includes a raised front privacy fascia finished in gloss white laminated MDF with thin black grid inlay, trimmed with a matte black rigid PVC or powder-coated metal kickplate strip for sharp visual contrast. The high-gloss white laminate work surfaces are accented by matching 2mm thick white PVC edge banding, creating a clean, polished profile that anchors entry spaces without visual clutter. The side return extends outward to expand dedicated staff work area, while the recessed knee opening sits beneath the main work surface to provide unobstructed seated legroom for the single supported attendant.
The desk is built on an E1-grade high-density particleboard core, with a 25mm thick scratch-resistant high-gloss white laminate work surface rated for 100kg static load, and laminate finish tested to 2000 cycles of abrasion resistance for daily wear and stain resistance. Lockable storage uses cold-rolled steel ball-bearing full-extension slides rated for 50000 open-close cycles, secured by a matte black zinc alloy keyed cam lock, with adjacent storage doors fitted with hinges rated for 80000 cycles. All components are fastened with zinc-plated steel cam lock screws and confirmat screws, and a black ABS plastic cable pass-through grommet routes power and data cables neatly from the work surface to the floor.
Functional design elements include the 350mm tall raised privacy panel that blocks visitor line of sight to work surface items, the key-locked drawer that secures valuables and sensitive paperwork on the attendant side, and an adjacent open storage bay sized to hold frequently used office supplies for easy access. The overall unit measures 1600 x 1200 x 1100mm, with a 750mm main work surface height, 690mm knee clearance height, 800mm knee clearance width, and an open storage compartment sized 400 x 350 x 150mm.
This desk is suited for small office lobbies with single-staff reception coverage, beauty salon reception zones for client check-in and scheduling, small boutique or studio retail checkout points, clinic front desks for patient check-in and paperwork processing, and open coworking entry areas to create a defined welcome point with clear visitor-staff visual separation. It supports a maximum seated user weight of 120kg. For procurement, note each unit ships in multiple cartons with a total packaged gross weight of 180kg and 1m³ packaging volume, requiring 40 minutes of assembly per set. No additional matching pieces are specified as part of the base product offering.

Modern L-Shaped Two-Tier Reception Desk with Raised Privacy Panel and Lockable Storage Specifications

Suppliers and stock