Product supplierBlack Channel-Tufted Cantilever Conference Chair with Padded Armrests, Black smooth upholstery over foam padding with tailored edge stitching
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 610 × 650 × 1000 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended occupant weight | 160 kg | |
|---|---|---|
| Net weight | 13 kg | |
| Seat foam thickness | 70 mm | |
| Seat foam density | 45 kg/m3 | |
| Back foam thickness | 40 mm | |
| Back foam density | 35 kg/m3 | |
| Foam rebound resilience | 40 percent | |
| Upholstery material thickness | 1.2 mm | |
| Abrasion resistance target | 50000 Martindale cycles | |
| Seam stitch pitch | 8 stitches per 25 mm |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Black smooth upholstery over foam padding with tailored edge stitching | |
|---|---|---|
| Back upholstery | Black smooth upholstery with seven visible vertical channel seams | |
| Seat cushion core | Polyurethane foam pad, 70 mm engineering thickness and 45 kg/m3 engineering density | |
| Back cushion core | Polyurethane foam pad, 40 mm engineering thickness and 35 kg/m3 engineering density | |
| Arm pads | Black upholstered pads with padded tops and matching side panels | |
| Arm support structure | Polished chrome-plated round steel tube, 25 mm engineering diameter | |
| Cantilever base | Continuous chrome-plated steel wire-sled frame with two floor runners | |
| Back inner support board | 12 mm engineered wood or composite panel with edge framing | |
| Seat inner support board | 12 mm plywood or molded composite seat board | |
| Floor protection | Black polymer glide strips along each metal runner | |
| Frame fasteners | Steel bolted joints at arm, seat support, and back mounting points | |
| Surface finish | Polished chrome metal finish with black upholstered exterior surfaces |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating function | Fixed single-person conference seat with a 510 mm-wide padded cushion and 450 mm seat height | |
|---|---|---|
| Back support | Fixed medium-high back with 560 mm back height and 10-degree recline for meeting-room posture | |
| Cantilever movement | Continuous sled frame provides controlled flex without rotation, recline lock, or gas-height adjustment | |
| Arm support | Two fixed padded armrests at 220 mm above the seat provide forearm support during meetings | |
| Floor handling | Two full-length sled runners spread load and allow short repositioning on hard floors by lifting or sliding | |
| Upholstery styling | Vertical channel tufting divides the back into seven tailored panels for a formal executive appearance | |
| Stacking capability | Non-stacking construction due to the continuous enclosed cantilever frame and padded arm panels | |
| Swivel and height adjustment | No swivel, tilt, gas lift, or seat-depth mechanism is present in the fixed visitor-chair structure | |
| Floor protection | Continuous polymer runner glides reduce direct chrome contact across a 650 mm floor footprint | |
| Access and egress | Open front sled design gives 250 mm under-seat clearance and permits side or frontal entry | |
| Backrest recline from vertical | 10 degrees | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive conference room | Formal black channel-back design suits boardrooms and meeting tables where a uniform non-swivel visitor chair is required | |
|---|---|---|
| Visitor and guest seating | Fixed armrests and stable sled base suit short-to-medium duration guest meetings in reception or manager offices | |
| Open-plan meeting area | Four or more chairs can be specified around a 2400 mm meeting table with consistent black upholstery and chrome finishes | |
| Training and interview room | The 450 mm seat height and padded back support formal interview and training use without rolling-casual movement | |
| Hotel business center | Scuff-resistant chrome runners and dark upholstery are suited to shared business lounges requiring tidy executive seating | |
| Home office study | The chair can serve a traditional desk when a non-adjustable formal visitor aesthetic is preferred, but it offers no height or tilt adjustment | |
| Seating layout recommendation | Provide 650 mm table-width allowance per chair and 800 mm rear circulation clearance for the 650 mm-deep sled frame | |
| Floor surface recommendation | Use supplied continuous glides on tile, wood, vinyl, and low-pile carpet; inspect glides before polished-floor installation |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 16139 applicability | EN 16139 covers strength, durability, and safety for non-domestic seating and suits conference-chair procurement | |
|---|---|---|
| EN 1022 applicability | EN 1022 may be used to assess stability of the fixed cantilever chair on level floors | |
| EN 12520 applicability | EN 12520 may be used for residential seating safety if the chair is also sold for home offices |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.4 applicability | ANSI/BIFMA X5.4 lounge and public-office seating criteria may guide static and fatigue evaluation | |
|---|---|---|
| ANSI/BIFMA X5.1 applicability | ANSI/BIFMA X5.1 may be used as an alternate office-chair strength reference where contract terms permit | |
| BIFMA E3 applicability | BIFMA E3 may support sustainable-material and packaging documentation if requested by the buyer |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324 applicability | GB/T 3324 general technical requirements for wooden furniture may apply to internal seat and back boards | |
|---|---|---|
| GB/T 10357.3 applicability | GB/T 10357.3 strength and durability test methods for chairs may guide back, seat, and arm load verification | |
| GB/T 3325 applicability | GB/T 3325 metal furniture requirements may apply to the steel cantilever frame and finish | |
| GB 28007 applicability | GB 28007 may apply when specified for children's furniture, but this product is sized as an adult conference chair |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324 applicability: GB/T 3324 general technical requirements for wooden furniture may apply to internal seat and back boards; 2. GB/T 10357.3 applicability: GB/T 10357.3 strength and durability test methods for chairs may guide back, seat, and arm load verification; 3. GB/T 3325 applicability: GB/T 3325 metal furniture requirements may apply to the steel cantilever frame and finish; 4. GB 28007 applicability: GB 28007 may apply when specified for children's furniture, but this product is sized as an adult conference chair; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool