| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 800 x 400 x 900 mm | |
|---|---|---|
| Open top cubby dimensions | 360 x 350 x 240 mm | |
| Single drawer front dimensions | 360 x 180 mm | |
| Slatted door dimensions | 400 x 780 mm | |
| Internal cabinet shelf clearance | 360 mm | |
| Base plinth height | 80 mm | |
| Top overhang | 10 mm | |
| Slat gap width | 12 mm | |
| Door panel thickness | 20 mm | |
| Carcass side panel thickness | 18 mm | |
| Back panel thickness | 9 mm | |
| Carcass Panel Thickness | 25 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Overall product net weight | 38 kg | |
|---|---|---|
| Top surface static load capacity | 50 kg | |
| Hinge open/close cycle rating | 80000 cycles | |
| Drawer slide open/close cycle rating | 50000 cycles | |
| Brass hardware anti-tarnish service life | 5 years | |
| Recommended maximum loaded total weight | 120 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main carcass frame | Walnut-finished solid wood/engineered wood composite | |
|---|---|---|
| Vertical slatted door | Solid wood slats with matte walnut finish | |
| Drawer fronts | Recessed panel wood construction with matching walnut finish | |
| Cabinet back panel | Engineered wood panel with matching wood veneer | |
| Drawer handles | Brass alloy with brushed antique brass finish | |
| Door latch pull | Solid brass teardrop design with anti-oxidation coating | |
| Internal shelf (enclosed section) | Adjustable solid wood shelf with clear finish | |
| Drawer slides | Cold-rolled steel with soft-close damping mechanism | |
| Door hinges | Stainless steel concealed hinges with 110-degree opening | |
| Top surface edge | Solid wood edge banding with rounded profile | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints |
Adjustment / rotation / tilt / mobility / storage features
| Open top cubby storage | Open unobstructed compartment for frequently used tea tools | |
|---|---|---|
| Two stacked drawer storage | Pull-out soft-close drawers for small sealed tea and accessory storage | |
| Slatted door enclosed storage | Right single door opens to full-height compartment with one adjustable shelf | |
| Door opening mechanism | Single side-hinged door opens 110 degrees with brass turn latch | |
| Drawer extension type | Full-extension soft-close slides for full internal access | |
| Anti-tip security | 2 wall-mounted anti-tip connectors included for wall anchoring | |
| Adjustable shelf position | 3 height positions in 32mm increments for flexible storage | |
| Ventilated storage function | Slatted door provides passive air circulation for stored tea leaves | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Living room side storage | Placed against sofa side wall for tea set and decorative display storage, 400mm depth avoids protruding walkway obstruction | |
|---|---|---|
| Tea room dedicated storage | Positioned next to tea table for organized tea canister, tea tool and accessory storage, ventilated slat door preserves tea freshness | |
| Dining room small sideboard | Used as compact dining storage for tableware, placemats and small serving items, matches casual dining spaces | |
| Entryway console storage | Placed in entryway for key, mail and daily item storage, low profile does not block entry sightlines | |
| Home office auxiliary storage | Positioned next to desk for document, stationery and office supply storage, walnut finish matches warm office aesthetics | |
| Recommended matching furniture | Pairs with walnut wood tea tables, fabric sofas and other new Chinese style solid wood furniture |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units safety and performance requirements | |
|---|---|---|
| EN 12521:2015 | Domestic furniture strength, durability and safety requirements for storage units | |
| EN 71-3:2019 | Safety of furniture migration of certain elements if used in family spaces |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural acceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture | |
| GB/T 4897-2015 | Particleboard specification requirements if engineered wood components are used | |
| GB/T 1931-2009 | Wood moisture content determination method for solid wood components |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural acceptance; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture; 3. GB/T 4897-2015: Particleboard specification requirements if engineered wood components are used; 4. GB/T 1931-2009: Wood moisture content determination method for solid wood components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
