Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	620 × 680 × 990 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended user weight capacity	160 kg
Net weight	16 kg
Seating capacity	1 person
Backrest static support load	160 kg
Armrest downward static load	45 kg per arm
Cantilever base floor load points	4 glide contacts
Fabric or leather abrasion acceptance target	50,000 Martindale cycles
Seat foam density acceptance target	45 kg/m3
Back foam density acceptance target	35 kg/m3
Seat foam rebound acceptance value	40%

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Seat upholstery	Tan leather-look upholstered surface with stitched edge detailing
Back upholstery	Tan upholstered padded back panel with contoured side wings
Seat cushioning	Molded polyurethane foam, 90 mm thick at front edge
Back cushioning	Polyurethane padding over a rigid load-bearing back shell, 85 mm thick
Internal seat support	12 mm molded plywood or steel seat plate with anti-squeak isolation
Cantilever frame	25 mm chrome-plated steel tube bent into continuous sled rails
Chrome finish	Polished chrome plating over steel with 80-hour salt-spray acceptance target
Arm supports	Curved chrome-plated steel supports tied into the cantilever frame
Arm pads	25 mm tan padded pads on rigid backing plates
Floor glides	Black polymer non-marring glides at four rail ends
Upholstery thickness	1.2 mm facing material acceptance thickness
Seam construction	Visible perimeter seam with 8 stitches per 50 mm acceptance pitch

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Cantilever rocking action	Fixed sled base provides controlled flex without swivel, tilt lock, or height adjustment
360-degree rotation	Non-swivel fixed seat for stable guest and conference positioning
Height adjustment	Fixed 450 mm seat height with no actuator or gas lift
Arm support	Fixed padded arms at 680 mm floor height provide forearm support during meetings
Back support	Tall contoured mid-back gives lumbar and lower-thoracic support without recline mechanism
Floor protection	Four polymer glides reduce scratching and resist lateral sliding on hard floors
Entry and exit	Open sled-front design permits side and front access without caster interference
Stacking	Non-stacking single chair configuration
Maintenance	Wipe-clean upholstered faces and exposed chrome frame suit daily conference-room upkeep
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Executive visitor seating	Place across from an executive desk for guests, with 450 mm seat height matching standard desk height
Conference rooms	Use around boardroom tables in 2 to 12 chair configurations
Manager offices	Pair with an executive desk for visitors while preserving a premium tan-and-chrome appearance
Reception areas	Position in waiting zones with hard-floor glides and stable four-contact base
Meeting pods	Arrange side by side in compact discussion areas requiring 620 mm width per seat
Open-plan touchdown spaces	Use for short seated discussions where casters and recline controls are unnecessary
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

No standards data is available for this market.

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.1 General-Purpose Office Chairs applicability	Apply static load, back, arm and stability acceptance tests to this fixed office guest chair
ANSI/BIFMA e3 furniture sustainability applicability	Use only if supplier declares material, chemical and recycled-content credits

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 10357 furniture strength test applicability	Specify seat, back and leg static-load and durability test methods for acceptance
GB 18584 indoor furniture material applicability	Require interior-decoration material limit testing for the finished upholstered furniture

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 10357 furniture strength test applicability: Specify seat, back and leg static-load and durability test methods for acceptance;
2. GB 18584 indoor furniture material applicability: Require interior-decoration material limit testing for the finished upholstered furniture;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · VC-CAN-620-590-990

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · VC-CAN-620-590-990

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · VC-CAN-620-590-990Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Tan Upholstered Executive Guest Chair combines a refined mid-back silhouette with a polished chrome cantilever base, creating seating suited to professional visitor and meeting environments. Its tan leather-look upholstery covers a padded seat and contoured back panel, with stitched edge detailing and shaped side wings that give the chair a structured, executive appearance. Fixed padded armrests align with the continuous sled frame, while the open front maintains a clean visual profile and supports easy access from the side or front. Construction centers on a 25 mm chrome-plated steel tube frame formed into continuous sled rails. Curved chrome arm supports tie into the cantilever structure, and four polymer glides provide the floor contact points. The seat uses molded polyurethane foam, 90 mm thick at the front edge, over a 12 mm molded plywood or steel support plate fitted with anti-squeak isolation. The backrest combines polyurethane padding with a rigid load-bearing shell, including a defined lumbar support zone. Tan arm pads, 25 mm thick, are mounted on rigid backing plates. The polished chrome finish is specified with an 80-hour salt-spray acceptance target, and the upholstery has a 50,000 Martindale cycle abrasion acceptance target. Designed for stable guest positioning, the chair is non-swivel and fixed-height, with no tilt lock, recline mechanism, actuator, or gas lift. The cantilever sled base allows controlled flex while the 450 mm seat height remains suited to standard desk-height settings. Four glides help reduce scratching and limit unwanted lateral movement on hard floors. The fixed arms provide forearm support during meetings, and the mid-back offers lumbar and lower-thoracic support without adjustable mechanisms. The model is rated for a 160 kg recommended user weight, with matching static back support and a 45 kg per-arm downward static load rating. This chair is appropriate for executive offices, reception waiting areas, conference rooms, manager offices, meeting pods, and open-plan touchdown spaces. It can be placed across from a desk, arranged around boardroom tables, or positioned side by side in compact discussion areas. The tan-and-chrome finish works particularly well where a premium but understated visitor look is required. Procurement teams should note the model VC-CAN-620-990 is unbranded and supplied as one set across two cartons, with packaged gross weight of 23 kg and a reference assembly time of 40 minutes per set. Overall dimensions are 620 x 680 x 990 mm, with 540 mm between armrests, making layout planning straightforward. The fixed configuration simplifies operation and maintenance, while the hard-floor glides and absence of casters should be matched to the intended floor and access pattern.

Tan Upholstered Executive Guest Chair with Chrome Cantilever Sled Base Specifications

Suppliers and stock