Black Upholstered Cantilever Conference Chair with Fixed Armrests (model CVC-BLK-SLED-01) is listed under Bow Chair. Dimensions: 620 × 680 × 980 mm. Materials: Black 1.0 mm polyurethane-coated fabric or leather-look surface, sewn and tensioned over the cushion.. Load capacity: 160 kg. Product Features: black,upholstery,mid-back,design,cantilever,sled,base,fixed,armrests,seating. This page consolidates 6 groups of specifications and ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | JIULONGYOUSHENG | Model | CVC-BLK-SLED-01 |
| Overall dimensions (W × D × H) | 620 × 680 × 980 mm | Finished Seat Cushion Thickness | 90 mm |
| Backrest Padding Thickness | 70 mm | Lumbar Support Zone Height | 240 mm |
| Clear Width Between Armrests | 540 mm | Net weight | 14 kg |
| Recommended occupant load | 160 kg | Static seat proof load | 500 kg for 1 hour |
| Backrest backward load | 136 kg applied to upper back | Armrest downward load | 68 kg per arm |
| Cantilever durability | 100,000 seated loading cycles | Seat foam compression set | 8 percent after 22 hours at 70 degrees C |
| Upholstery abrasion resistance | 50,000 Martindale cycles | Recommended daily occupancy duration | 8 hours |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | Seat upholstery | Black 1.0 mm polyurethane-coated fabric or leather-look surface, sewn and tensioned over the cushion. |
| Back upholstery | Black 1.0 mm upholstery layer formed over a padded, tapered back panel with finished perimeter piping. | Seat foam | 80 mm polyurethane cushion at 45 kg/m3 density with 40 percent rebound. |
| Back foam | 60 mm polyurethane padding at 40 kg/m3 density with 35 percent rebound. | Seat support board | 12 mm molded plywood or high-density composite board anchored to four steel fixing points. |
| Back support board | 10 mm molded plywood or formed composite panel with edge rounding before upholstery. | Armrest | Black 8 mm polyurethane pad over a 1.2 mm formed steel arm carrier, fixed to seat and back brackets. |
| Cantilever frame | 25 mm diameter, 2.0 mm wall steel tube bent into twin U-shaped side frames with cross braces. | Frame finish | Polished chrome plating 0.25 mm thick over polished steel with welded joints ground smooth. |
| Floor glides | Injection-molded nylon or TPE glides 30 mm long, riveted to each rail end. | Seam construction | Bonded polyester thread with 80 mm seam pitch and reinforced stress points. |
| Fasteners | Zinc-plated steel M8 bolts and lock washers at arm, seat, and frame junctions. | Fixed seating height | 450 mm seat height without lift adjustment, optimized for 720 to 760 mm conference tables. |
| Cantilever flex movement | Steel sled frame provides controlled vertical flex over 20 mm deflection under 100 kg seat load. | Fixed arm support | 230 mm arm height above seat provides forearm support during meetings and push-up assistance. |
| Stationary mobility | Four floor glides and twin continuous rails keep the chair non-swiveling and non-castered for orderly table placement. | Stacking function | Non-stacking design with fixed back and arms; chairs should be stored upright rather than nested. |
| Floor protection | Replaceable TPE glides reduce scratching on wood, tile, and hard conference-room flooring. | Entry and egress | Open front sled frame provides 350 mm knee clearance and no center pedestal obstruction. |
| Back support | 520 mm fixed mid-back panel supports the thoracic region through a 10-degree reclined back angle. | Maintenance access | M8 bolted arm and seat attachments allow upholstery or glide replacement without frame replacement. |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
| Height Adjustment Stroke | 100 mm continuous travel | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Carton Dimensions | 850× 420× 720 mm |
| Reference Packaged Gross Weight | 23 kg/set | Reference Carton Volume | 0.26 m³/set |
| Indicative 20GP Loading | 135 sets at 85% space utilization | Indicative 40HQ Loading | 320 sets at 85% space utilization |
| Boardroom seating | Place 8 to 20 chairs around a 750 mm high conference table for formal meetings, using fixed glides to maintain aligned seating rows. | Visitor and guest seating | Use in executive reception or meeting rooms where a quiet, non-rolling chair conveys stable guest seating and easy entry. |
| Training room configuration | Arrange in rows or classroom layouts for 1 to 8 hour sessions, pairing with tablet-free tables where orderly positioning is preferred. | Manager meeting area | Position 2 chairs opposite a desk for short discussions, with 450 mm seat height matching standard office desk height. |
| Open-office collaboration zone | Group around a compact meeting table for project reviews; the sled base simplifies placement without wheeled movement. | Hotel or conference center use | Specify for function rooms requiring 50,000-cycle abrasion-resistant black upholstery and replaceable floor glides. |
| Public reception counter waiting area | Use in restrained waiting zones where stationary chairs prevent unintended rolling and support a uniform professional appearance. | Recommended Matching Desk Size | 2.4 m executive desk |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 620 × 680 × 980 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 14 kg | |
|---|---|---|
| Recommended occupant load | 160 kg | |
| Static seat proof load | 500 kg for 1 hour | |
| Backrest backward load | 136 kg applied to upper back | |
| Armrest downward load | 68 kg per arm | |
| Cantilever durability | 100,000 seated loading cycles | |
| Seat foam compression set | 8 percent after 22 hours at 70 degrees C | |
| Upholstery abrasion resistance | 50,000 Martindale cycles | |
| Recommended daily occupancy duration | 8 hours | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Black 1.0 mm polyurethane-coated fabric or leather-look surface, sewn and tensioned over the cushion. | |
|---|---|---|
| Back upholstery | Black 1.0 mm upholstery layer formed over a padded, tapered back panel with finished perimeter piping. | |
| Seat foam | 80 mm polyurethane cushion at 45 kg/m3 density with 40 percent rebound. | |
| Back foam | 60 mm polyurethane padding at 40 kg/m3 density with 35 percent rebound. | |
| Seat support board | 12 mm molded plywood or high-density composite board anchored to four steel fixing points. | |
| Back support board | 10 mm molded plywood or formed composite panel with edge rounding before upholstery. | |
| Armrest | Black 8 mm polyurethane pad over a 1.2 mm formed steel arm carrier, fixed to seat and back brackets. | |
| Cantilever frame | 25 mm diameter, 2.0 mm wall steel tube bent into twin U-shaped side frames with cross braces. | |
| Frame finish | Polished chrome plating 0.25 mm thick over polished steel with welded joints ground smooth. | |
| Floor glides | Injection-molded nylon or TPE glides 30 mm long, riveted to each rail end. | |
| Seam construction | Bonded polyester thread with 80 mm seam pitch and reinforced stress points. | |
| Fasteners | Zinc-plated steel M8 bolts and lock washers at arm, seat, and frame junctions. |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Fixed seating height | 450 mm seat height without lift adjustment, optimized for 720 to 760 mm conference tables. | |
|---|---|---|
| Cantilever flex movement | Steel sled frame provides controlled vertical flex over 20 mm deflection under 100 kg seat load. | |
| Fixed arm support | 230 mm arm height above seat provides forearm support during meetings and push-up assistance. | |
| Stationary mobility | Four floor glides and twin continuous rails keep the chair non-swiveling and non-castered for orderly table placement. | |
| Stacking function | Non-stacking design with fixed back and arms; chairs should be stored upright rather than nested. | |
| Floor protection | Replaceable TPE glides reduce scratching on wood, tile, and hard conference-room flooring. | |
| Entry and egress | Open front sled frame provides 350 mm knee clearance and no center pedestal obstruction. | |
| Back support | 520 mm fixed mid-back panel supports the thoracic region through a 10-degree reclined back angle. | |
| Maintenance access | M8 bolted arm and seat attachments allow upholstery or glide replacement without frame replacement. | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Boardroom seating | Place 8 to 20 chairs around a 750 mm high conference table for formal meetings, using fixed glides to maintain aligned seating rows. | |
|---|---|---|
| Visitor and guest seating | Use in executive reception or meeting rooms where a quiet, non-rolling chair conveys stable guest seating and easy entry. | |
| Training room configuration | Arrange in rows or classroom layouts for 1 to 8 hour sessions, pairing with tablet-free tables where orderly positioning is preferred. | |
| Manager meeting area | Position 2 chairs opposite a desk for short discussions, with 450 mm seat height matching standard office desk height. | |
| Open-office collaboration zone | Group around a compact meeting table for project reviews; the sled base simplifies placement without wheeled movement. | |
| Hotel or conference center use | Specify for function rooms requiring 50,000-cycle abrasion-resistant black upholstery and replaceable floor glides. | |
| Public reception counter waiting area | Use in restrained waiting zones where stationary chairs prevent unintended rolling and support a uniform professional appearance. | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.1 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp