Gray Upholstered Executive Conference Chair with Cantilever Base (model EXEC-CF-GRY-01) is listed under Bow Chair. Dimensions: 640 × 680 × 1010 mm. Materials: 1.2 mm gray polyurethane-coated fabric or leather-grain surface, tailored over rounded cushion with stitched perimeter. Load capacity: 120 kg. Product Features: Gray,upholstery,high-back,executive,styling,fixed,armrests,polished,chrome,cantilever,base,visitor,and,chair. This page consolidates 6 groups of specifications and ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | JIULONGYOUSHENG | Model | EXEC-CF-GRY-01 |
| Overall dimensions (W × D × H) | 640 × 680 × 1010 mm | Finished Seat Cushion Thickness | 90 mm |
| Backrest Padding Thickness | 70 mm | Lumbar Support Zone Height | 240 mm |
| Clear Width Between Armrests | 540 mm | Net weight | 15 kg |
| Recommended occupant load | 120 kg | Static proof load on seat | 160 kg |
| Backrest backward static load | 90 kgf | Armrest downward load | 60 kgf per arm |
| Cantilever flex fatigue rating | 100,000 loading cycles | Floor glide sliding rating | 30,000 cycles |
| Recommended daily occupancy duration | 8 hours | Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
| Back Foam Density Reference | 38 kg/m³ | Seat upholstery | 1.2 mm gray polyurethane-coated fabric or leather-grain surface, tailored over rounded cushion with stitched perimeter |
| Back upholstery | 1.2 mm gray upholstery over contoured back panel with vertical side returns and visible edge seams | Arm pads | Integrated gray upholstered pads with 20 mm polyurethane foam over rigid arm supports |
| Seat cushion foam | 45 kg/m3 polyurethane foam, 80 mm thick at front and 60 mm under-thigh profile | Back padding | 35 kg/m3 polyurethane padding, 40 mm thick on lumbar area and 25 mm at upper back |
| Seat support panel | 12 mm molded plywood or engineered composite board bonded to cushion and steel mounting plate | Back support panel | 10 mm molded plywood or reinforced polypropylene shell with side bolsters |
| Cantilever frame | 25 mm diameter chrome-plated welded steel tube with continuous twin-sled U-bend construction | Frame finish | 0.25 mm nickel and chrome plating over polished steel tube, bright mirror finish |
| Floor glides | Black polymer non-marking glides, 30 mm diameter, mechanically fitted to each runner end | Mounting hardware | M8 steel bolts and welded steel support brackets connect seat shell to cantilever frame |
| Seam construction | Bonded polyester thread with 80 mm seam pitch and matched gray edge piping | Fixed cantilever support | Continuous steel sled flexes slightly under load but provides 0 mm height adjustment and 0-degree swivel |
| Fixed back posture | Back support remains locked at 100 degrees from the seat plane with no tilt or recline mechanism | Integrated arm support | 220 mm arm height supports forearms during meetings and assists entry and exit at both sides |
| Floor mobility | Four polymer glides allow repositioning by sliding on hard floors; no casters are installed | Floor protection | 30 mm contact glides distribute chair weight and reduce scratching on wood, tile, or vinyl floors |
| Stacking capability | Non-stacking fixed configuration with 0 chairs stackable due to enclosed cantilever profile | Occupant turn behavior | Stationary base requires the user to reposition the chair manually; 360-degree seat rotation is not available |
| Entry and exit clearance | 260 mm under-seat clearance and open sled front provide foot room without a front crossbar | Backrest recline from seat plane | 100 degrees |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
| Height Adjustment Stroke | 100 mm continuous travel | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Carton Dimensions | 850× 420× 720 mm |
| Reference Packaged Gross Weight | 23 kg/set | Reference Carton Volume | 0.26 m³/set |
| Indicative 20GP Loading | 135 sets at 85% space utilization | Indicative 40HQ Loading | 320 sets at 85% space utilization |
| Boardroom conference table | Use around a 760 mm high meeting table for directors or clients, with 450 mm seat height and fixed professional posture. | Executive visitor seating | Place one or two chairs in front of an executive desk for guests, using armrests and a non-rolling base for formal meetings. |
| Meeting and training rooms | Arrange in rows or around modular tables where quiet sliding movement and uniform gray upholstery support all-day sessions. | Reception and waiting areas | Use in executive lounges or reception zones where a high-back chair provides visual presence and padded comfort. |
| Private office consultation | Pair with an executive desk for short consultations, with cantilever glides suited to hard-finish office floors. | Hotel conference centers | Specify for banquet meeting rooms and boardroom suites requiring non-caster visitor chairs and chrome aesthetics. |
| Public-sector interview rooms | Use for formal interviews where stable fixed seating, integrated arms, and durable upholstery are preferred. | Recommended Matching Desk Size | 2.4 m executive desk |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 640 × 680 × 1010 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 15 kg | |
|---|---|---|
| Recommended occupant load | 120 kg | |
| Static proof load on seat | 160 kg | |
| Backrest backward static load | 90 kgf | |
| Armrest downward load | 60 kgf per arm | |
| Cantilever flex fatigue rating | 100,000 loading cycles | |
| Floor glide sliding rating | 30,000 cycles | |
| Recommended daily occupancy duration | 8 hours | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | 1.2 mm gray polyurethane-coated fabric or leather-grain surface, tailored over rounded cushion with stitched perimeter | |
|---|---|---|
| Back upholstery | 1.2 mm gray upholstery over contoured back panel with vertical side returns and visible edge seams | |
| Arm pads | Integrated gray upholstered pads with 20 mm polyurethane foam over rigid arm supports | |
| Seat cushion foam | 45 kg/m3 polyurethane foam, 80 mm thick at front and 60 mm under-thigh profile | |
| Back padding | 35 kg/m3 polyurethane padding, 40 mm thick on lumbar area and 25 mm at upper back | |
| Seat support panel | 12 mm molded plywood or engineered composite board bonded to cushion and steel mounting plate | |
| Back support panel | 10 mm molded plywood or reinforced polypropylene shell with side bolsters | |
| Cantilever frame | 25 mm diameter chrome-plated welded steel tube with continuous twin-sled U-bend construction | |
| Frame finish | 0.25 mm nickel and chrome plating over polished steel tube, bright mirror finish | |
| Floor glides | Black polymer non-marking glides, 30 mm diameter, mechanically fitted to each runner end | |
| Mounting hardware | M8 steel bolts and welded steel support brackets connect seat shell to cantilever frame | |
| Seam construction | Bonded polyester thread with 80 mm seam pitch and matched gray edge piping |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Fixed cantilever support | Continuous steel sled flexes slightly under load but provides 0 mm height adjustment and 0-degree swivel | |
|---|---|---|
| Fixed back posture | Back support remains locked at 100 degrees from the seat plane with no tilt or recline mechanism | |
| Integrated arm support | 220 mm arm height supports forearms during meetings and assists entry and exit at both sides | |
| Floor mobility | Four polymer glides allow repositioning by sliding on hard floors; no casters are installed | |
| Floor protection | 30 mm contact glides distribute chair weight and reduce scratching on wood, tile, or vinyl floors | |
| Stacking capability | Non-stacking fixed configuration with 0 chairs stackable due to enclosed cantilever profile | |
| Occupant turn behavior | Stationary base requires the user to reposition the chair manually; 360-degree seat rotation is not available | |
| Entry and exit clearance | 260 mm under-seat clearance and open sled front provide foot room without a front crossbar | |
| Backrest recline from seat plane | 100 degrees | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Boardroom conference table | Use around a 760 mm high meeting table for directors or clients, with 450 mm seat height and fixed professional posture. | |
|---|---|---|
| Executive visitor seating | Place one or two chairs in front of an executive desk for guests, using armrests and a non-rolling base for formal meetings. | |
| Meeting and training rooms | Arrange in rows or around modular tables where quiet sliding movement and uniform gray upholstery support all-day sessions. | |
| Reception and waiting areas | Use in executive lounges or reception zones where a high-back chair provides visual presence and padded comfort. | |
| Private office consultation | Pair with an executive desk for short consultations, with cantilever glides suited to hard-finish office floors. | |
| Hotel conference centers | Specify for banquet meeting rooms and boardroom suites requiring non-caster visitor chairs and chrome aesthetics. | |
| Public-sector interview rooms | Use for formal interviews where stable fixed seating, integrated arms, and durable upholstery are preferred. | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.1 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp