Product supplierGray Upholstered Cantilever Conference Chair with Chrome Sled Frame, Gray leather-look upholstery with stitched face panels
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 610 × 650 × 1010 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 160 kg | |
|---|---|---|
| Net weight | 14 kg | |
| Recommended user height range | 190 cm | |
| Seating capacity | 1 person | |
| Cantilever flex durability target | 100000 cycles | |
| Back static load acceptance target | 110 kg | |
| Floor glide contact points | 4 glides | |
| Frame steel tube diameter | 25 mm | |
| Frame wall thickness | 1.5 mm | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Gray leather-look upholstery with stitched face panels | |
|---|---|---|
| Back upholstery | Gray padded upholstery with three vertical stitched channels | |
| Seat cushion | High-resilience polyurethane foam pad, 90 mm thick, 45 kg/m3 target density | |
| Back cushion | Molded polyurethane foam pad, 70 mm thick, 35 kg/m3 target density | |
| Internal seat support | 12 mm plywood or steel plate carrier with edge protection | |
| Back support board | 8 mm molded plywood or steel-reinforced polymer panel | |
| Cantilever frame | Polished chrome-plated steel tube, 25 mm diameter and 1.5 mm wall thickness | |
| Arm pads | Black padded polyurethane pads fixed over curved steel arm supports | |
| Frame-to-floor glides | Black injection-molded nylon or rubber pads with steel attachment bases | |
| Upholstery seam construction | Lock-stitched vertical seams with 7 stitches per 50 mm target pitch | |
| Frame finish | Mirror polished chrome plating with 0.25-hour copper and 0.2-micrometer chrome acceptance target | |
| Edge and bumper protection | Black polymer bumpers at arm bends and floor contact zones |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Fixed cantilever support | Continuous steel sled base provides controlled fore-aft flex without rotation or casters | |
|---|---|---|
| Upright meeting posture | Tall stitched backrest supports the lumbar and lower thoracic area during conference use | |
| Fixed arm support | Padded arm rests are stationary at 230 mm above the seat and support forearm resting | |
| Floor protection | Four replaceable rubber or nylon glides reduce floor marking and noise | |
| Stacking capability | Not designed for stacking due to the tall upholstered back and enclosed arm frame | |
| Recline adjustment | Fixed back angle at a 100-degree torso-to-seat target angle | |
| Height adjustment | Fixed 450 mm seat height with no gas lift or height actuator | |
| Access and movement | Lightweight side-arm design allows repositioning by lifting; no brake or caster maintenance required | |
| Upholstery maintenance | Smooth gray face panels and stitched channels permit wiping and periodic vacuum cleaning | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Conference room | Use around boardroom tables where a fixed 450 mm seat and quiet glides support formal meetings | |
|---|---|---|
| Executive visitor seating | Place in front of desks for guests seeking padded back and arm support | |
| Training room | Specify for fixed-position training layouts with hard-floor or carpeted surfaces | |
| Manager office | Pair with an executive desk for occasional consultation or short-duration computer work | |
| Reception area | Use in pairs beside low meeting tables where a polished gray-and-chrome appearance is desired | |
| Procurement configuration | Order in sets of four or more with matching glides and upholstery dye lots | |
| Commercial care environment | Suitable for dry indoor offices at 70percent relative humidity | |
| Recommended Matching Desk Size | 2.4 m executive desk |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.1 |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool