Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	740 × 760 × 790 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended user weight capacity	140 kg
Seating capacity	1 person
Product net weight	16 kg
Back static load reference	180 kg
Seat impact durability reference	100,000 cycles
Leg stability verification	20 N horizontal stability force
Upholstery seam strength target	400 N
Cushion compression set reference	35 percent after 22 hours at 40 percent compression
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Upper back upholstery	Taupe smooth upholstery material over padded curved shell
Lower shell upholstery	Charcoal smooth upholstery covering front apron and lower arm panels
Seat cushion covering	Charcoal smooth upholstery with perimeter stitched seam
Seat cushion core	110 mm polyurethane foam pad, 35 kg/m3 density target
Back padding	20 mm polyurethane foam layer over shaped back board
Internal load-bearing shell	12 mm molded plywood or composite board with reinforcing blocks
Support legs	Four 25 mm diameter dark powder-coated steel tubes with splayed geometry
Floor contacts	Four polymer or felt glides pressed onto leg ends
Joint hardware	Steel mounting plates with M8 frame screws at each leg
Upper-to-lower panel joinery	Stitched horizontal seam separating taupe and charcoal upholstery zones
Seat cushion seam	Double-stitched front perimeter seam with 4 mm stitch pitch target
Back panel construction	One continuous padded panel wrapping into integrated arm caps

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating function	Fixed single-person lounge seat with 430 mm seat height for relaxed reception seating
Back support	Continuous wraparound back provides 430 mm upper-body and lateral shoulder support
Arm support	Integrated upholstered arms provide continuous forearm and elbow support at about 600 mm floor height
Leg stance	Four outward-splayed metal legs provide a 640 mm front footprint to resist tipping
Cushion design	Removable-looking boxed seat cushion provides a 110 mm padded sitting surface
Floor protection	Four end glides allow use on tile, wood, or carpet while reducing floor marking
Maintenance access	250 mm under-shell clearance permits vacuuming and floor cleaning beneath the chair
Stacking or folding	Non-stacking, non-folding rigid chair structure
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Office reception	Suitable for reception and visitor waiting zones where one compact upholstered chair occupies 740 x 760 mm floor space
Executive lounge	Fits executive lounges and informal meeting corners due to its padded wraparound back and low integrated arms
Hotel seating	Suitable for hotel lobbies, guest floors, and bedroom seating areas with hard-floor glides and neutral two-tone finish
Residential living space	Can serve as an accent chair in a study, living room, or bedroom seating area
Meeting breakout area	Pairs with small side tables for short-duration collaborative or breakout seating
Senior care or consultancy room	Useful for visitor-side seating where a 430 mm seat height and arm support aid seated transfer
Recommended layout spacing	Maintain 350 mm rear access clearance and 450 mm side clearance for circulation and cleaning
Upholstery configuration	Use grouped pairs in taupe and charcoal to coordinate with wood, stone, or dark metal interior finishes

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

No standards data is available for this market.

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

No standards data is available for this market.

Standardized tender description text

This product must meet the following technical requirements:
1. Technical standards and test reports must be supplied during tender or purchase confirmation;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · LUX-LG-740-TT

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · LUX-LG-740-TT

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · LUX-LG-740-TTOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The Two-Tone Upholstered Lounge Armchair with Splayed Metal Legs is a contemporary single-person seat with a compact, welcoming profile. Its overall form is 740 mm wide, 760 mm deep, and 790 mm high, anchored by four outward-splayed dark powder-coated steel tubes that produce a 640 mm front footprint. The chair presents a continuous wraparound back with integrated upholstered armrests, giving the seating area a smooth, enclosed silhouette. The upper back is covered in taupe smooth upholstery, while the front apron and lower arm panels use charcoal smooth upholstery, creating a restrained two-tone appearance suited to neutral interiors. Construction combines padded comfort with a structured load-bearing frame. The internal shell uses a 12 mm molded plywood or composite board with reinforcing blocks. The seat includes an 110 mm polyurethane foam cushion with a 35 kg/m3 density target, finished in charcoal upholstery with a perimeter stitched seam. The back has a 20 mm polyurethane foam layer over a shaped back board, with finished backrest padding of 70 mm and a 240 mm lumbar support zone. Each leg is a 25 mm diameter steel tube fitted with polymer or felt glides and secured using steel mounting plates and M8 frame screws. The fixed lounge seat has a 430 mm seat height and seating capacity for one person, with a recommended user weight capacity of 140 kg. The 540 mm clear width between armrests leaves open space at the seat, while the continuous arms provide forearm and elbow support at about 600 mm from the floor. The 430 mm wraparound back supports the upper body and lateral shoulders. A 250 mm under-shell clearance allows vacuuming and floor cleaning beneath the chair, and the glides support use on tile, wood, or carpet while reducing floor marking. This model is appropriate for office reception and visitor waiting zones, executive lounges, informal meeting corners, hotel lobbies and guest floors, residential studies or bedrooms, and breakout areas paired with small side tables. It is also useful for the visitor side of senior care or consultancy rooms where arm support and the specified seat height can assist seated transfer. For procurement, the chair is unbranded under model LUX-LG-740-TT and supplied as one set in two cartons. Packaged gross weight is 23 kg per set, carton volume is 0.26 cubic meters, and reference assembly time is 40 minutes. The indicative 20GP container load is 135 sets at 85 percent space utilization. Reference checks include a 180 kg back static load, 100,000-cycle seat impact durability, 20 N horizontal leg stability verification, and a 400 N upholstery seam strength target.

Two-Tone Upholstered Lounge Armchair with Splayed Metal Legs Specifications

Suppliers and stock