High-Back Upholstered Conference Chair with Chrome Cantilever Base (model HB-CANT-TAN-01) is listed under Bow Chair. Dimensions: 640 × 700 × 1120 mm. Materials: Tan leather-look upholstery over padded cushion, material grade requiring supplier BOM confirmation. Load capacity: 320 kg. Product Features: High-back,fixed,cantilever,base,integrated,armrests,tan,upholstery,chrome,finish,seating. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | JIULONGYOUSHENG | Model | HB-CANT-TAN-01 |
| Overall dimensions (W × D × H) | 640 × 700 × 1120 mm | Finished Seat Cushion Thickness | 90 mm |
| Backrest Padding Thickness | 70 mm | Lumbar Support Zone Height | 240 mm |
| Clear Width Between Armrests | 540 mm | Net weight | 18 kg |
| Recommended user weight capacity | 160 kg | Recommended user height range | 190 cm |
| Seating capacity | 1 person | Cantilever static load acceptance target | 320 kg |
| Backrest cyclic durability target | 120,000 cycles | Floor glide compression capacity | 80 kg per glide |
| Recommended warranty period | 5 years | Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
| Back Foam Density Reference | 38 kg/m³ | Seat upholstery | Tan leather-look upholstery over padded cushion, material grade requiring supplier BOM confirmation |
| Back upholstery | Tan padded upholstered panel with stitched perimeter and horizontal dividing seam | Armrest padding | Tan upholstered continuous arm pads connected to the back shell |
| Side accent panels | Dark brown or black rigid polymer/wood-composite panels below the arm supports | Seat support shell | Molded rigid load-bearing seat shell with an 8 mm engineering target |
| Internal back support | Rigid board or formed plywood panel with a 9 mm engineering target | Cushion foam | Molded polyurethane foam, seat density target 45 kg/m3 and back density target 35 kg/m3 |
| Cantilever frame | Chrome-plated steel tube, 25 mm diameter and 1.5 mm wall thickness target | Floor glides | Four black non-marking polymer glides fitted at runner ends |
| Upholstery seam construction | Stitched horizontal seat-back seam with 6 mm target stitch pitch | Surface finish | Polished chrome plating on exposed steel, with a smooth semi-gloss upholstery face |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | Fixed cantilever movement | Continuous steel runners provide limited vertical flex without swivel, tilt, or height adjustment |
| Back support mode | Tall connected backrest provides upper-back and shoulder support for upright meeting posture | Arm support | Integrated fixed armrests provide forearm support at 670 mm above floor and no width adjustment |
| Entry and exit | Open-front sled frame allows side access with 600 mm runner clearance | Floor protection | Four replaceable polymer glides isolate chrome tube ends from hard floors |
| Stacking capability | Non-stacking single chair; the tall upholstered back and enclosed arm shell do not show stacking geometry | Swivel function | No swivel bearing is present; the seat is fixed to the cantilever frame |
| Tilt and lock function | No tilt mechanism or recline lock; back angle is fixed by the upholstered shell and frame | Height adjustment | No gas lift; fixed 450 mm seat height is set by the cantilever base |
| Movement method | Floor glides allow short repositioning on hard floors but no caster mobility | Recline Angle / Lock Reference | 125° with 3suggested lock positions |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Carton Dimensions | 850× 420× 720 mm |
| Reference Packaged Gross Weight | 23 kg/set | Reference Carton Volume | 0.26 m³/set |
| Indicative 20GP Loading | 135 sets at 85% space utilization | Indicative 40HQ Loading | 320 sets at 85% space utilization |
| Boardroom seating | Use around fixed conference tables where a 450 mm seat height and quiet glides support long meetings | Executive visitor seating | Place in front of executive desks for clients or visiting managers |
| Meeting room rows | Deploy in rows or around modular tables; the non-caster base reduces unintended movement | Private office consultation | Use as a guest chair beside a desk or in a two-chair consultation setting |
| Hotel meeting suites | Specify for conference centers and club lounges needing durable adult visitor seating | Reception interview area | Pair two chairs with a low table for structured guest conversations |
| Hard-floor interiors | Recommended for wood, tile, vinyl, and sealed concrete floors with the four polymer glides | Recommended Matching Desk Size | 2.4 m executive desk |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 640 × 700 × 1120 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 18 kg | |
|---|---|---|
| Recommended user weight capacity | 160 kg | |
| Recommended user height range | 190 cm | |
| Seating capacity | 1 person | |
| Cantilever static load acceptance target | 320 kg | |
| Backrest cyclic durability target | 120,000 cycles | |
| Floor glide compression capacity | 80 kg per glide | |
| Recommended warranty period | 5 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Tan leather-look upholstery over padded cushion, material grade requiring supplier BOM confirmation | |
|---|---|---|
| Back upholstery | Tan padded upholstered panel with stitched perimeter and horizontal dividing seam | |
| Armrest padding | Tan upholstered continuous arm pads connected to the back shell | |
| Side accent panels | Dark brown or black rigid polymer/wood-composite panels below the arm supports | |
| Seat support shell | Molded rigid load-bearing seat shell with an 8 mm engineering target | |
| Internal back support | Rigid board or formed plywood panel with a 9 mm engineering target | |
| Cushion foam | Molded polyurethane foam, seat density target 45 kg/m3 and back density target 35 kg/m3 | |
| Cantilever frame | Chrome-plated steel tube, 25 mm diameter and 1.5 mm wall thickness target | |
| Floor glides | Four black non-marking polymer glides fitted at runner ends | |
| Upholstery seam construction | Stitched horizontal seat-back seam with 6 mm target stitch pitch | |
| Surface finish | Polished chrome plating on exposed steel, with a smooth semi-gloss upholstery face | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Fixed cantilever movement | Continuous steel runners provide limited vertical flex without swivel, tilt, or height adjustment | |
|---|---|---|
| Back support mode | Tall connected backrest provides upper-back and shoulder support for upright meeting posture | |
| Arm support | Integrated fixed armrests provide forearm support at 670 mm above floor and no width adjustment | |
| Entry and exit | Open-front sled frame allows side access with 600 mm runner clearance | |
| Floor protection | Four replaceable polymer glides isolate chrome tube ends from hard floors | |
| Stacking capability | Non-stacking single chair; the tall upholstered back and enclosed arm shell do not show stacking geometry | |
| Swivel function | No swivel bearing is present; the seat is fixed to the cantilever frame | |
| Tilt and lock function | No tilt mechanism or recline lock; back angle is fixed by the upholstered shell and frame | |
| Height adjustment | No gas lift; fixed 450 mm seat height is set by the cantilever base | |
| Movement method | Floor glides allow short repositioning on hard floors but no caster mobility | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Boardroom seating | Use around fixed conference tables where a 450 mm seat height and quiet glides support long meetings | |
|---|---|---|
| Executive visitor seating | Place in front of executive desks for clients or visiting managers | |
| Meeting room rows | Deploy in rows or around modular tables; the non-caster base reduces unintended movement | |
| Private office consultation | Use as a guest chair beside a desk or in a two-chair consultation setting | |
| Hotel meeting suites | Specify for conference centers and club lounges needing durable adult visitor seating | |
| Reception interview area | Pair two chairs with a low table for structured guest conversations | |
| Hard-floor interiors | Recommended for wood, tile, vinyl, and sealed concrete floors with the four polymer glides | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| EN 16139 applicability | Strength, durability, and safety reference for non-domestic seating such as conference chairs | |
|---|---|---|
| EN 1022 applicability | Stability test reference for a fixed four-contact-point visitor chair | |
| EN 12521 applicability | Domestic furniture safety, strength, and durability requirements may be used only for residential versions |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.1 |
|---|
Standards applicable to China-market projects
| GB/T 10357.2 applicability | Furniture mechanical surface test for chair seat and back durability in commercial indoor use | |
|---|---|---|
| GB/T 10357.3 applicability | Chair strength and durability test for static, impact, and fatigue loading |
This product must meet the following technical requirements: 1. GB/T 10357.2 applicability: Furniture mechanical surface test for chair seat and back durability in commercial indoor use; 2. GB/T 10357.3 applicability: Chair strength and durability test for static, impact, and fatigue loading; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp