Product supplierHigh-Back Diamond-Quilted Executive Guest Chair with Chrome Sled Base, Black leather-look upholstery with quilted center back and stitched seat
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 620 × 700 × 1120 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Chair net weight | 16 kg | |
|---|---|---|
| Recommended user weight capacity | 160 kg | |
| Seat static load verification target | 200 kg for 1 hour | |
| Backrest rearward static test target | 136 kg for 1 hour | |
| Sled frame cyclic durability target | 120,000 seating cycles | |
| Seat foam density | 45 kg/m3 | |
| Back foam density | 35 kg/m3 | |
| Foam rebound | 40% | |
| Seating capacity | 1 person | |
| Suggested warranty | 5 years frame, 2 years upholstery |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Black leather-look upholstery with quilted center back and stitched seat | |
|---|---|---|
| Upholstery thickness | 1.2 mm | |
| Seat cushion | 90 mm molded polyurethane foam over a concealed support board | |
| Back cushion | 70 mm layered polyurethane padding with raised lumbar quilting | |
| Arm pads | Black padded upholstered arm cushions with rounded front edges | |
| Arm outer trim | Polished chrome-plated tubular metal loop surrounding each arm pad | |
| Base frame | Twin chrome-plated cantilever steel tubes joined by floor runners | |
| Steel tube specification | 25 mm diameter x 1.5 mm wall steel tube | |
| Seat support board | 12 mm plywood or formed composite seat carrier | |
| Back support board | 10 mm contoured plywood or molded composite back carrier | |
| Floor glides | Black polymer non-marking glides at the runner ends | |
| Seam construction | Diamond-stitched back panel and parallel horizontal seat seams with 60 mm seam pitch |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Fixed seating position | Fixed 460 mm seat height with no gas lift or swivel mechanism | |
|---|---|---|
| Cantilever flex | Continuous chrome runners provide controlled vertical flex without moving the footprint | |
| Lumbar and back support | High contoured back with 700 mm support height and raised quilted lumbar zone | |
| Fixed arm support | Padded loop arms provide 230 mm forearm support above the seat and do not adjust | |
| Upholstery ventilation pattern | Diamond stitching creates separate padded facets across the lumbar region | |
| Floor protection | End glides allow the chair to slide on hard floors while reducing direct metal contact | |
| Stacking capability | Not designed for stacking; the high back and closed arm loops occupy a fixed profile | |
| Swivel and recline function | No swivel, tilt lock, or reclining mechanism is present | |
| Recommended abrasion acceptance | 50,000 Martindale cycles for synthetic upholstery or 30,000 cycles for leather | |
| Color option count | 1 visible black upholstery color | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive meeting room | Use around boardroom tables where the 460 mm seat height supports face-to-face discussion | |
|---|---|---|
| Visitor seating across a desk | Place in front of executive desks for clients or staff meetings | |
| Reception and waiting lounge | Suitable for premium reception areas needing coordinated black executive seating | |
| Conference training suite | Specify in multiples for commercial conference rooms with hard floors | |
| Manager office consultation area | Pair with an executive desk or low meeting table for short-to-medium visits | |
| Commercial interior standardization | Use where a uniform black-and-chrome aesthetic is required across multiple rooms | |
| Not recommended for intensive workstation use | Best for visitor and meeting duty because swivel, height, and recline adjustments are absent | |
| Recommended Matching Desk Size | 2.4 m executive desk |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Safety and stability recommendation | EN 16139:2013+A1:2016 for strength, durability, and stability of non-domestic seating | |
|---|---|---|
| Office-chair dimensional ergonomics | EN 1335:2020 office furniture seating dimensions | |
| Office-chair safety recommendation | EN 1335:2018 safety requirements for office chairs | |
| Upholstered furniture flammability | BS EN 1021:2014 smouldering cigarette ignition test |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| Seating durability recommendation | ANSI/BIFMA X2017General Purpose Office Chairs tests for static, impact, and cyclic loading |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Safety standard recommendation | GB/T 38614 general safety requirements for office furniture | |
|---|---|---|
| Furniture mechanical test recommendation | GB/T 10357.3strength and durability test for seating furniture | |
| Leather or coated-fabric labeling | GB/T 2703terminology and material declaration checks where leather is claimed | |
| Furniture indoor emission recommendation | GB 28007for limited formaldehyde emissions in upholstered furniture |
Standardized tender description text
This product must meet the following technical requirements: 1. Safety standard recommendation: GB/T 38614 general safety requirements for office furniture; 2. Furniture mechanical test recommendation: GB/T 10357.3strength and durability test for seating furniture; 3. Leather or coated-fabric labeling: GB/T 2703terminology and material declaration checks where leather is claimed; 4. Furniture indoor emission recommendation: GB 28007for limited formaldehyde emissions in upholstered furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool