Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	610 × 680 × 1010 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight	12 kg
Recommended user weight capacity	160 kg
Suggested daily user weight for continuous office use	120 kg
Seat foam density	35 kg/m3
Back foam density	28 kg/m3
Foam rebound	40%
Fabric abrasion acceptance value	50,000 Martindale cycles
Frame vertical static acceptance load	1000 N
Backrest rearward static acceptance load	700 N
Warranty period	3 years

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Seat upholstery	Black polyurethane faux leather over 80 mm padded cushion
Back upholstery	Black polyurethane faux leather with two upper panels and pleated lumbar insert
Seat cushion core	High-resilience polyurethane foam, 35 kg/m3 target density
Back cushion core	Molded polyurethane foam, 28 kg/m3 target density
Internal seat support board	12 mm plywood or engineered composite board
Back support panel	8 mm molded plywood or reinforced composite panel
Cantilever frame	25 mm chrome-plated steel tube with continuous sled legs
Frame tube wall thickness	1.5 mm steel wall target
Arm supports	Chrome-plated bent steel arms with black padded top surfaces
Arm pads	Black polyurethane pad over steel arm support
Floor glides	Four black non-marking rubber or nylon end caps
Stitching and upholstery detail	Black bonded seams with 80 mm seam pitch and vertical lumbar pleats

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Fixed-height seating	450 mm fixed seat height with no gas lift, intended for standard 760 mm conference tables
Cantilever flex	Continuous chrome sled frame provides controlled vertical flex under a 160 kg user load
Back support	Fixed 10-degree rearward back angle with 570 mm mid-back support for upright meeting use
Lumbar comfort	Pleuted lower lumbar pad provides localized contact across a 230 mm-high lower-back zone
Arm support	Fixed padded armrests at 670 mm floor height and 220 mm above seat for forearm support
Non-swivel design	Welded cantilever base prevents seat rotation and suits formal visitor or boardroom seating
Floor protection	Four end glides distribute contact over a 680 mm-long rail and reduce hard-floor scratching
Stacking capability	Non-stacking construction with continuous arm-to-sled side frames
Upholstery maintenance	Smooth black surface can be wiped clean with neutral upholstery cleaner suited to polyurethane leather
Color offering	1 visible black upholstery color with polished chrome frame
Backrest tilt angle	10 degrees rearward
Recline Angle / Lock Reference	125° with 3suggested lock positions

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Boardroom seating	Place around 760 mm conference tables for formal upright meetings with 450 mm fixed seat height
Executive office visitor use	Position in front of an executive desk for short-to-medium duration guest seating
Reception and waiting areas	Use in professional reception zones where a non-rolling chair protects orderly layout
Meeting and training rooms	Deploy in repeated room sets where uniform black upholstery and chrome frames create consistent appearance
Administrative workstations	Use as a fixed guest chair beside desks where task swivel controls are unnecessary
Hotel business centers	Specify for conference suites and business lounges needing wipe-clean dark upholstery
Not recommended setting	Not specified as an 8-hour adjustable task chair because no gas lift, recline mechanism, or swivel base is present
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 16139	Suggested European strength, durability, and safety basis for non-domestic seating
EN 1022	Suggested stability test reference for seating
EN 12520	Suggested safety, strength, and durability reference for domestic seating

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.4	Applicable standards and test results require confirmation
ANSI/BIFMA e3	Applicable standards and test results require confirmation

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 10357.2	Suggested static-load test basis for seat and back furniture structures
GB/T 10357.3	Suggested strength and durability test basis for office seating

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 10357.2: Suggested static-load test basis for seat and back furniture structures;
2. GB/T 10357.3: Suggested strength and durability test basis for office seating;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · UB-CF-CHR-001

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · UB-CF-CHR-001

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · UB-CF-CHR-001Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Black Faux Leather Sled-Base Conference Chair presents a formal, executive-inspired silhouette suited to meeting rooms, executive offices, and professional visitor settings. Its black polyurethane faux leather upholstery is paired with a polished chrome-plated steel cantilever frame, creating a clean contrast between dark seating surfaces and bright metallic structure. The back is styled with two upper panels and a pleated lumbar insert, while fixed padded armrests add a structured, traditional boardroom appearance. The continuous sled legs give the chair an open, uncluttered base and help maintain orderly alignment around tables or in reception configurations. The chair has overall dimensions of 610 x 680 x 1010 mm, with a 90 mm finished seat cushion, 70 mm backrest padding, and a 540 mm clear width between the armrests. Comfort features include a 450 mm fixed seat height, a fixed 10-degree rearward back angle, and 570 mm mid-back support designed for upright meeting posture. The pleated lower lumbar pad provides localized contact across a 230 mm-high lower-back zone. Fixed armrests sit 670 mm from the floor and 220 mm above the seat for forearm support. Unlike swivel task chairs, the welded cantilever base prevents rotation, while the frame offers controlled vertical flex. Construction combines a high-resilience polyurethane seat foam with a target density of 35 kg/m3 and molded polyurethane back foam with a target density of 28 kg/m3. The upholstery covers an internal 12 mm plywood or engineered composite seat support board and an 8 mm molded plywood or reinforced composite back panel. The frame uses 25 mm chrome-plated steel tube with a 1.5 mm target steel wall thickness, continuous sled legs, bent steel arm supports, black arm pads, and rubber floor glides. The upholstery has a fabric abrasion acceptance value of 50,000 Martindale cycles, and the recommended user weight capacity is 160 kg, with a suggested daily user weight of 120 kg for continuous office use. This model is appropriate around 760 mm conference tables, in front of executive desks, and in reception, waiting, meeting, training, and hotel business center environments. The dark wipe-clean upholstery and repeated matching frame finish also support uniform room layouts. Procurement teams should note that one set ships in two cartons, with packaged gross weight of 23 kg and reference assembly time of 40 minutes per set. The fixed-height, non-swivel, non-rolling design should be matched to intended use, and floor glides should be checked for compatibility with the finished floor surface.

Black Faux Leather Sled-Base Conference Chair with Chrome Frame Specifications

Suppliers and stock