Modern High-Back Upholstered Visitor Chair with Cantilever Base (model VIS-HB-CANT-01) is listed under Bow Chair. Dimensions: 660 × 760 × 1080 mm. Materials: Ivory leather-look upholstery over padded cushion, likely leather or polyurethane-coated fabric; visible smooth grain and seam lines require supplier BOM confirmation.. Load capacity: 100,000 cycles at 70 kg equivalent back load. Product Features: Modern,style,high-back,structure,upholstered,visitor,chair,cantilever,metal,base,visible,contrast,shell. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | JIULONGYOUSHENG | Model | VIS-HB-CANT-01 |
| Overall dimensions (W × D × H) | 660 × 760 × 1080 mm | Finished Seat Cushion Thickness | 90 mm |
| Backrest Padding Thickness | 70 mm | Lumbar Support Zone Height | 240 mm |
| Clear Width Between Armrests | 540 mm | Recommended user weight capacity | 160 kg |
| Number of users | 1 person | Net weight | 18 kg |
| Cantilever flex travel | 15 mm under seated load | Back lateral support height | 680 mm from seat surface |
| Recommended daily usage duration | 8 hours | Frame static acceptance target | 450 kg |
| Seat impact durability target | 100,000 cycles | Backrest cyclic load target | 100,000 cycles at 70 kg equivalent back load |
| Warranty baseline | 5 years for frame and structure; 2 years for upholstery and contact surfaces | Seat upholstery | Ivory leather-look upholstery over padded cushion, likely leather or polyurethane-coated fabric; visible smooth grain and seam lines require supplier BOM confirmation. |
| Back upholstery | Ivory padded front back panel with horizontal lumbar seam and continuous edge wrapping; material grade requires supplier BOM confirmation. | Outer back shell | Dark brown or black rigid molded shell visible on the lower rear and side, likely composite board or polymer over structural core. |
| Seat cushion | 100 mm molded polyurethane foam pad with tailored upholstery cover; density and fire rating require supplier data. | Back cushion | 70 mm polyurethane back pad with lumbar shaping, inferred from soft surface relief and stitched panel break. |
| Arm pads | Integrated ivory upholstered pads continuous with the seat and back, supported by the dark outer shell. | Cantilever frame | Polished chrome-plated steel tube formed as two side cantilever loops joined beneath the seat. |
| Floor runners | Continuous tubular steel runners with smooth polished ends, intended to spread load and reduce floor marking. | Internal load panel | 12 mm structural wood-composite or molded seat support recommended inside the upholstered seat; concealed, so confirmation is required. |
| Joining hardware | M8 steel frame-to-shell bolts with lock nuts recommended for 160 kg user capacity; actual hardware is concealed. | Surface finish | Bright polished chrome finish on visible frame with satin-reflective appearance and dark matte outer shell. |
| Stitching | Single-needle tailored seam construction with an 7 stitches per 50 mm along cushion and back panels. | Fixed cantilever movement | The continuous chrome frame flexes vertically by an 15 mm and returns without a swivel or tilt mechanism. |
| Non-swivel seating | The seat and back are fixed to the sled frame, providing stable guest seating for conference and reception layouts. | Integrated arm support | Padded armrests are fixed at 220 mm above the seat and connect visually into the back shell for upper-arm support. |
| High-back posture support | The 680 mm back provides lumbar and lower-shoulder support in an upright meeting posture. | Floor-friendly placement | Two continuous polished runners distribute load and avoid five separate rolling contact points on hard floors. |
| Stacking function | Non-stacking fixed cantilever design; the continuous high back and arms preclude compact vertical stacking. | Recline adjustment | No recline mechanism is visible; back angle is fixed at an 100 degrees from the seat plane. |
| Height adjustment | No gas cylinder is present; seat height is fixed at 450 mm for standard meeting-table use. | Cushion retention | Tailored upholstery and hidden internal panel retain the cushion shape; supplier should confirm edge-fastening method. |
| Entry access | Open front sled frame with 300 mm under-seat clearance allows side or front approach without armrest release. | Recline Angle / Lock Reference | 125° with 3suggested lock positions |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Carton Dimensions | 850× 420× 720 mm |
| Reference Packaged Gross Weight | 23 kg/set | Reference Carton Volume | 0.26 m³/set |
| Indicative 20GP Loading | 135 sets at 85% space utilization | Indicative 40HQ Loading | 320 sets at 85% space utilization |
| Executive meeting room | Use at boardroom or conference tables because the fixed 450 mm seat height aligns with standard 760 mm work surfaces. | Reception and guest seating | The tailored high-back appearance and warm ivory upholstery suit professional visitor waiting areas. |
| Managerial office guest position | Place one or two chairs in front of an executive desk for short-to-medium-duration consultation seating. | Conference training room | Fixed cantilever bases reduce moving parts compared with swivel task chairs and provide a uniform room layout. |
| Hotel business lounge | Suitable for premium lounge corners where upright support and easy floor maintenance are required. | Public corporate showroom | The contrasting dark shell and chrome frame create a clean modern presentation without caster clutter. |
| Hard-floor installation | Continuous sled runners are appropriate for tile, wood, and carpet; optional felt glides should be specified for sensitive floors. | Single-user specification | Specify one chair per 660 mm place setting to preserve arm clearance in rows or boardroom arrangements. |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 660 × 760 × 1080 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 160 kg | |
|---|---|---|
| Number of users | 1 person | |
| Net weight | 18 kg | |
| Cantilever flex travel | 15 mm under seated load | |
| Back lateral support height | 680 mm from seat surface | |
| Recommended daily usage duration | 8 hours | |
| Frame static acceptance target | 450 kg | |
| Seat impact durability target | 100,000 cycles | |
| Backrest cyclic load target | 100,000 cycles at 70 kg equivalent back load | |
| Warranty baseline | 5 years for frame and structure; 2 years for upholstery and contact surfaces |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Ivory leather-look upholstery over padded cushion, likely leather or polyurethane-coated fabric; visible smooth grain and seam lines require supplier BOM confirmation. | |
|---|---|---|
| Back upholstery | Ivory padded front back panel with horizontal lumbar seam and continuous edge wrapping; material grade requires supplier BOM confirmation. | |
| Outer back shell | Dark brown or black rigid molded shell visible on the lower rear and side, likely composite board or polymer over structural core. | |
| Seat cushion | 100 mm molded polyurethane foam pad with tailored upholstery cover; density and fire rating require supplier data. | |
| Back cushion | 70 mm polyurethane back pad with lumbar shaping, inferred from soft surface relief and stitched panel break. | |
| Arm pads | Integrated ivory upholstered pads continuous with the seat and back, supported by the dark outer shell. | |
| Cantilever frame | Polished chrome-plated steel tube formed as two side cantilever loops joined beneath the seat. | |
| Floor runners | Continuous tubular steel runners with smooth polished ends, intended to spread load and reduce floor marking. | |
| Internal load panel | 12 mm structural wood-composite or molded seat support recommended inside the upholstered seat; concealed, so confirmation is required. | |
| Joining hardware | M8 steel frame-to-shell bolts with lock nuts recommended for 160 kg user capacity; actual hardware is concealed. | |
| Surface finish | Bright polished chrome finish on visible frame with satin-reflective appearance and dark matte outer shell. | |
| Stitching | Single-needle tailored seam construction with an 7 stitches per 50 mm along cushion and back panels. |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Fixed cantilever movement | The continuous chrome frame flexes vertically by an 15 mm and returns without a swivel or tilt mechanism. | |
|---|---|---|
| Non-swivel seating | The seat and back are fixed to the sled frame, providing stable guest seating for conference and reception layouts. | |
| Integrated arm support | Padded armrests are fixed at 220 mm above the seat and connect visually into the back shell for upper-arm support. | |
| High-back posture support | The 680 mm back provides lumbar and lower-shoulder support in an upright meeting posture. | |
| Floor-friendly placement | Two continuous polished runners distribute load and avoid five separate rolling contact points on hard floors. | |
| Stacking function | Non-stacking fixed cantilever design; the continuous high back and arms preclude compact vertical stacking. | |
| Recline adjustment | No recline mechanism is visible; back angle is fixed at an 100 degrees from the seat plane. | |
| Height adjustment | No gas cylinder is present; seat height is fixed at 450 mm for standard meeting-table use. | |
| Cushion retention | Tailored upholstery and hidden internal panel retain the cushion shape; supplier should confirm edge-fastening method. | |
| Entry access | Open front sled frame with 300 mm under-seat clearance allows side or front approach without armrest release. | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive meeting room | Use at boardroom or conference tables because the fixed 450 mm seat height aligns with standard 760 mm work surfaces. | |
|---|---|---|
| Reception and guest seating | The tailored high-back appearance and warm ivory upholstery suit professional visitor waiting areas. | |
| Managerial office guest position | Place one or two chairs in front of an executive desk for short-to-medium-duration consultation seating. | |
| Conference training room | Fixed cantilever bases reduce moving parts compared with swivel task chairs and provide a uniform room layout. | |
| Hotel business lounge | Suitable for premium lounge corners where upright support and easy floor maintenance are required. | |
| Public corporate showroom | The contrasting dark shell and chrome frame create a clean modern presentation without caster clutter. | |
| Hard-floor installation | Continuous sled runners are appropriate for tile, wood, and carpet; optional felt glides should be specified for sensitive floors. | |
| Single-user specification | Specify one chair per 660 mm place setting to preserve arm clearance in rows or boardroom arrangements. |
EU Market Access Requirements* EN Standards
| EN 16139 non-domestic seating strength | Use Level 2 contract-seating strength, durability, and safety requirements for meeting and visitor chairs. | |
|---|---|---|
| EN 1022 seating stability | Verify forward, rearward, and side stability of the fixed cantilever chair on level floors. | |
| EN 12520 seating safety requirements | Check structural safety, shear points, and user-contact requirements for non-domestic seating. | |
| EN 1021-1 cigarette ignition | Specify cigarette-ignition assessment for upholstered furniture where fire performance is contractually required. | |
| EN 1021-2 match ignition | Specify match-flame ignition assessment for upholstered furniture where project fire criteria demand it. |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4 lounge and public seating | Use static, impact, leg-strength, and back-load tests appropriate to fixed public/visitor seating. | |
|---|---|---|
| ANSI/BIFMA e3 furniture sustainability standard | Use as a project sustainability criterion for material, energy, and social-responsibility documentation. |
Standards applicable to China-market projects
| GB/T 10357.2 furniture mechanical test | Apply the furniture mechanical structural-test method for chair back and seat durability during procurement inspection. | |
|---|---|---|
| GB/T 10357.3 furniture strength and durability | Use chair strength and durability test requirements to validate the fixed cantilever frame and loaded back structure. | |
| GB 18584 indoor furniture limit | Specify formaldehyde and hazardous-substance limits applicable to indoor furniture materials and composite components. | |
| GB/T 3324 general technical furniture requirement | Use general wooden-furniture technical requirements if the concealed shell or seat board is wood-based. | |
| GB 8404 upholstered furniture burning behavior | Specify this Chinese burning-behavior requirement only when the project requires domestic fire acceptance. |
This product must meet the following technical requirements: 1. GB/T 10357.2 furniture mechanical test: Apply the furniture mechanical structural-test method for chair back and seat durability during procurement inspection.; 2. GB/T 10357.3 furniture strength and durability: Use chair strength and durability test requirements to validate the fixed cantilever frame and loaded back structure.; 3. GB 18584 indoor furniture limit: Specify formaldehyde and hazardous-substance limits applicable to indoor furniture materials and composite components.; 4. GB/T 3324 general technical furniture requirement: Use general wooden-furniture technical requirements if the concealed shell or seat board is wood-based.; 5. GB 8404 upholstered furniture burning behavior: Specify this Chinese burning-behavior requirement only when the project requires domestic fire acceptance.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp