Product supplierTaupe Upholstered Swivel Conference Chair with Chrome Cantilever Base, Taupe leather-look upholstery, 1.2 mm face thickness, stitched at front perimeter
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 640 × 620 × 1010 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 17 kg | |
|---|---|---|
| Recommended user weight capacity | 160 kg | |
| Static seat proof-load target | 960 kg, 6.0 x rated load for 1 hour | |
| Cantilever frame cycle target | 120,000 rocking cycles | |
| Seat impact test target | 100,000 cycles | |
| Swivel rotation durability | 50,000 rotations | |
| Recommended daily users per chair | 8 users | |
| Seat foam density | 45 kg/m3 molded polyurethane | |
| Back foam density | 35 kg/m3 polyurethane | |
| Foam resilience | 40% ball rebound |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Taupe leather-look upholstery, 1.2 mm face thickness, stitched at front perimeter | |
|---|---|---|
| Back upholstery | Taupe upholstered front back with one horizontal seam | |
| Seat cushion foam | 80 mm polyurethane foam, 45 kg/m3 target density | |
| Back cushion foam | 55 mm polyurethane foam, 35 kg/m3 target density | |
| Outer back shell | Dark gray molded structural shell with smooth matte finish | |
| Inner load-bearing seat shell | 12 mm molded plywood or reinforced polymer seat carrier | |
| Armrest construction | Continuous padded taupe upholstery over a rigid curved inner support | |
| Cantilever base | 25 mm diameter chrome-plated steel tube with 1.8 mm wall thickness target | |
| Swivel connector | Powder-coated steel plate and bearing assembly between seat and base | |
| Floor glides | 30 mm non-marking polymer glides at each runner end | |
| Surface finish | Chrome plating with mirror-polished visible finish | |
| Seam construction | Single-needle stitched upholstery seam at 7 stitches per 50 mm target |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Swivel action | 360-degree horizontal rotation around the central bearing, with no gas-height adjustment | |
|---|---|---|
| Cantilever movement | Controlled spring-flex movement from the tubular sled frame, with 25 mm maximum rear deflection target | |
| Back support | High-back support covering lumbar and lower shoulder area, with fixed upright angle of 100 degrees | |
| Arm support | Integrated curved arms provide continuous side and forearm support during entry and exit | |
| Floor mobility | Fixed-foot design with four polymer glides; intended to be repositioned manually rather than rolled | |
| Stacking | Non-stacking single chair due to continuous wraparound arms and high back | |
| Rocking lock | No recline or tilt-lock mechanism; movement is limited to frame flex and swivel | |
| Seat return | Swivel bearing supports return to meeting-table alignment with 360-degree access | |
| Occupant entry | Side and front entry allowed by open sled base and 230 mm arm height | |
| Floor protection | Four replaceable glides distribute load and reduce scratching on wood or tile floors | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Assembly time | 25 minutes per chair for one person using the supplied Allen key | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive conference room | Use around boardroom tables where the 450 mm seat height and swivel support suit 760 mm table heights | |
|---|---|---|
| Visitor seating | Place in executive offices for guests who need arm support and easy 360-degree turning without wheeled mobility | |
| Meeting and interview room | Specify for 8person meeting rooms where quiet non-castered movement protects floors | |
| Hotel business lounge | Use in upscale lounges with taupe upholstery and chrome frame coordinated with neutral interiors | |
| Hard-floor installation | Suitable for tile, wood, vinyl, and sealed concrete floors because polymer glides are fitted at runner ends | |
| Carpeted meeting room | Suitable for low-pile commercial carpet; specify optional larger glides for pile above 8 mm | |
| Project procurement configuration | Order in batches with one unified taupe upholstery color and polished chrome frame for uniform boardroom layouts | |
| Not recommended for prolonged keyboard work | Best for meetings and visitor use because no height adjustment, tilt mechanism, or casters are present |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 16139 non-domestic seating | Use Level 2 strength, durability, and safety requirements for conference and institutional seating | |
|---|---|---|
| EN 1022 chair stability | Require forward, rearward, and sideways stability checks on the cantilever base | |
| EN 1728 strength and durability test methods | Specify seat, back, arm, and leg fatigue loading according to the selected EN 16139 level | |
| EN 12520 safety requirements | Apply physical safety criteria for edges, shearing points, and user-accessible components |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.4 lounge and public seating | Use static, impact, cyclic, and stability tests for commercial visitor and conference seating |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 10357.2 furniture test | Apply GB/T 10357.2 chair stability requirements for front, rear, and lateral tipping checks | |
|---|---|---|
| GB/T 10357.3 chair strength and durability | Apply static load, impact, and fatigue tests to seat, back, arms, and cantilever frame | |
| GB 28007 metal furniture coating | Use for chrome-coated metal furniture surface quality and corrosion acceptance if supplier supplies test data | |
| GB/T 24430.1 indoor furniture service | Use general indoor furniture structural and safety requirements as an acceptance reference | |
| GB 18587 formaldehyde emission | Request emission test data if the cushioning or composite interior uses bonded foam or board |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 10357.2 furniture test: Apply GB/T 10357.2 chair stability requirements for front, rear, and lateral tipping checks; 2. GB/T 10357.3 chair strength and durability: Apply static load, impact, and fatigue tests to seat, back, arms, and cantilever frame; 3. GB 28007 metal furniture coating: Use for chrome-coated metal furniture surface quality and corrosion acceptance if supplier supplies test data; 4. GB/T 24430.1 indoor furniture service: Use general indoor furniture structural and safety requirements as an acceptance reference; 5. GB 18587 formaldehyde emission: Request emission test data if the cushioning or composite interior uses bonded foam or board; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool