Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	620 × 680 × 1030 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended occupant load	160 kg
Static proof-load target	320 kg
Cantilever cyclic durability target	120,000 cycles
Net weight	15 kg
Backrest backward load target	90 kg
Arm vertical load target per arm	50 kg
Seat count	1 occupant
Floor load concentration	40 kg per glide at rated load
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Seat upholstery	Cream leather-look upholstery, 1.2 mm face material, stitched over padded seat cushion
Back upholstery	Cream leather-look upholstery over a tall upholstered back panel with horizontal lumbar seam
Seat cushion	High-resilience polyurethane foam, 80 mm thick, 45 kg/m3 density target
Back cushion	Molded polyurethane padding, 60 mm thick, 35 kg/m3 density target
Internal seat support	12 mm molded plywood or steel-reinforced composite seat board
Back support board	10 mm formed plywood or shaped composite back board
Cantilever frame	Polished chrome-plated steel tube, 32 mm diameter, 1.5 mm wall thickness target
Arm structure	Continuous chrome-plated steel loop with cream upholstered arm pads
Frame finish	Mirror polished chrome plating, 0.25 mm minimum total plating thickness target
Floor glides	Four black or translucent polymer non-marking glides pinned to the tube ends
Stitching	Single-line matching cream upholstery seam with 8 stitches per 100 mm target
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Fixed cantilever suspension	Twin continuous steel side rails flex slightly under load and return to position without mechanical tilt
Swivel function	No swivel; seat and back remain fixed to the chrome side frame
Height adjustment	No height adjustment; fixed 450 mm seat height for standard 760 mm desks
Arm support	Fixed curved loop arms provide continuous forearm and side support at 670 mm floor height
Entry and exit	Open-front sled base allows side and front access for meeting-room use
Floor protection	Four polymer glides distribute load and reduce noise on hard floors
Stacking	Non-stacking fixed upholstered chair
Rocking limit	Flex-limited cantilever action with a 6 degree maximum rear deflection target
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Conference room	Suited to boardroom tables because the fixed 450 mm seat height pairs with standard meeting tables.
Executive reception	Cream upholstery and polished frame provide formal visitor seating in reception and executive suites.
Manager office visitor area	Suitable for placement in front of a desk where a non-swiveling guest chair is preferred.
Training and meeting spaces	Fixed glides protect floors and reduce uncontrolled movement during scheduled meetings.
Hard-floor interiors	Polymer glides are appropriate for tile, wood, laminate, and sealed concrete floors.
Formal seating configuration	Can be specified in pairs or rows around conference tables with 620 mm per seating position.
Not suitable for height-adjustable workstations	Fixed seat height and lack of casters limit its use as an adjustable task chair.
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 16139 suitability	Level 1 non-domestic seating strength and durability is appropriate for conference and visitor areas.
EN 1022 suitability	Chair stability test method applies to forward, rearward, and side stability verification.
EN 12521 suitability	Furniture dimensional and safety requirements for non-domestic seating can support procurement acceptance.

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.1 static load suitability	Back, seat, and arm static load clauses are relevant acceptance tests for fixed office seating.

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 10357.2 suitability	Furniture mechanical surface test method applies to chair seat and back durability acceptance planning.
GB/T 10357.3 suitability	Furniture strength and durability test methods apply to chair static and cyclic load verification.
GB 28007 suitability	Children's furniture standard is not the primary standard for this adult office visitor chair.
GB/T 3324 suitability	General wooden furniture technical requirements may apply only if the seat substrate is wood-based.

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 10357.2 suitability: Furniture mechanical surface test method applies to chair seat and back durability acceptance planning.;
2. GB/T 10357.3 suitability: Furniture strength and durability test methods apply to chair static and cyclic load verification.;
3. GB 28007 suitability: Children's furniture standard is not the primary standard for this adult office visitor chair.;
4. GB/T 3324 suitability: General wooden furniture technical requirements may apply only if the seat substrate is wood-based.;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CF-CR-CHROME-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CF-CR-CHROME-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CF-CR-CHROME-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Cream Upholstered Cantilever Conference Chair combines a refined executive appearance with a robust fixed-frame structure, making it suited to professional meeting and visitor settings. Its cream leather-look upholstery is stitched over a padded seat cushion and tall back panel, with a horizontal lumbar seam defining the support zone. The continuous polished chrome frame creates a clean sled silhouette, while matching curved loop arms with cream arm pads add visual continuity and side support. Dimensions are 620 mm wide, 680 mm deep, and 1030 mm high, with a 540 mm clear width between armrests. The chair accommodates one occupant and offers a fixed 450 mm seat height. Construction centers on a polished chrome-plated steel cantilever frame using 32 mm diameter tube with a 1.5 mm wall thickness target and mirror polished plating. Twin continuous steel side rails provide gentle cantilever movement under load and return to position without a mechanical tilt mechanism. The seat uses an 80 mm high-resilience polyurethane cushion at a 45 kg/m3 density target, supported by a 12 mm molded plywood or steel-reinforced composite board. Back support comes from molded polyurethane padding, 60 mm thick at a 35 kg/m3 density target, over a 10 mm formed plywood or shaped composite board. Finished cushion thicknesses are 90 mm for the seat and 70 mm for the back, with a 240 mm lumbar support zone. The fixed design does not swivel or adjust in height, and the chair is non-stacking. Fixed arm supports reach 670 mm at floor height, while the open-front sled base permits front and side access during meetings. Four polymer glides help protect tile, wood, laminate, and sealed concrete floors and reduce noise on hard surfaces. Performance targets include a 160 kg recommended occupant load, 320 kg static proof load, 120,000-cycle cantilever durability target, 90 kg backward backrest load, and 50 kg vertical load per arm. Net weight is 15 kg.

Cream Upholstered Cantilever Conference Chair with Polished Chrome Frame Specifications

Suppliers and stock